Documente Academic
Documente Profesional
Documente Cultură
9
The Spectrum Power 3 takes the global power of Siemens and makes it more powerful and agile than ever before. Integration of Spectrum PowerCC Components Introduction of a Web-based User Interface (WebUI) Upgraded third-party products Addition of customer-requested features
Release 3.9 continues the evolution of Spectrum Power 3. The integration of Spectrum PowerCC Components enables Spectrum Power 3 system owners to use the flexibility and power of the components while benefiting from the market-proven Spectrum Power 3 SCADA and applications.
Choice of components
The Spectrum PowerCC Components available in Release 3.9 are the following: Historical Information System (HIS) Communications Front End (CFE) Transmission Network Applications (TNA) Operator Training Simulator (OTS)
Individual gateways connect the Spectrum PowerCC Components to the Spectrum Power 3 system. The gateways handle the communications across operating system boundaries.
HFD
Apps
SCADA
RTDS
Comm
UI
AIX Windows
PDM
Data Master
CNM Gateway
IMM
Replace or Supplement
HIS
CFE
TNA
The Computer Network Management (CNM) gateway enables Spectrum Power 3 users to manipulate the servers on which the components run as if they were traditional Spectrum Power 3 servers. All components are supported by the CNM gateway. Customers choose which components to configure as part of their Spectrum Power 3 system. They may choose just one component, all four components or any combination of the components. Further, both the HIS and CFE components run in parallel with the Spectrum Power 3 HFD and RTDS functions that they complement. This provides a low cost evolutionary path for customers currently using HFD for their archives and RTDS for their front ends. The TNA component is designed to replace the native Spectrum Power 3 TNA function.
Maintains historical cases for after-the-fact analysis Why OTS Provides a means to instruct control center staff in the use of
the energy management system
Allows control center staff to become familiar with the operational behavior of the transmission system
Supports training for emergency response scenarios May be used for black start system restoration planning Can be initialized from HIS (through the State Estimator) to
perform after-the-fact analyses of real-world actions
Why HIS High speed, high volume archiving solution for real-time data Highest levels of reliability and availability through multiple
levels of redundancy
Why TNA Provides accurate real time model for better monitoring of the
transmission grid Assesses the security of the power system grid with respect to thermal overloads, static voltage limits, and voltage collapse static voltage limits, and voltage collapse
For more information, please contact: Siemens Power Transmission & Distribution, Inc. Energy Management & Automation Division 10900 Wayzata Blvd., Suite 400 Minnetonka, MN 55305 USA phone: 952-607-2300 email: marketing.ema.sptd@siemens.com Visit our web site: www.usa.siemens.com/energy
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness hereof in not guaranteed. Since conditions of use are outside our control, the user should determine the suitability of the product for its intended use and assumes all risk and liability whatsoever in connection herewith. 2008, Siemens Power Transmission & Distribution, Inc. All rights reserved. E50001-U310-A476-X-US00 20080811 Subject to change without notice.