Documente Academic
Documente Profesional
Documente Cultură
#117-954
7500 Bluewater Road NW Albuquerque, NM 87121-1962 USA 800.545.6566 fax 800.965.2329 local 505.839.3300 international 505.839.3011 international fax 505.839.3016
Adapter Instructions
AllSet adapter is shown here with the Allset sander/planer accessory.The adapter can also be used with the Allset milling assembly.
GRS Benchmate Mounting Plate This plate fastens directly to your bench to give the AllSet adapter convenient slip-on, slip-off versatility.
Description Benchmate mounting plate Order # 118-126 each $13.98
Safety Notes
1. Always wear eye protection when carving, cutting, grinding, sanding or when using any power tool. 2. To avoid inhaling sanding dust and other fine particles, it is recommended you use a safety mask. 3. To avoid injury, please pay careful attention to hand placement, avoid distractions and do not operate power tools without your full attention. 4. Always allow the handpiece motor to come to a full stop before making any adjustments any Allset accessory. 5. For safety and effectiveness when using power toos, maintain a clean surface and a clean general work area.
1.
2.
Fine precision end-finishing on an adjustable angle (using set-up gauges) Sanding on an adjustable angle
3.
Please Note: Screws for mounting the AllSet Sander/Planer and the Milling Assembly onto the adapter are included with those kits.
4.
5.
Planer attachment mounted on an adjustable angle for platinum, gold, silver, base metal or wax working
Milling Assembly
#117-929
Fabricate faster and easier than ever with this multi-purpose milling assembly. Working with metal and wax is now remarkably more efficient and convenient. Slides into the GRS Benchmate mounting plate (see page 10).
Master Kit Quick-Change Adapter Kit #117-951 for Foredom No. 52 Handpiece
Includes AllSet threaded handpiece adapter, Easy-Cut prong guide and three channel setting guides: small, large (for baguette settings) and a knife-edge guide. Handpiece (#117-593) sold separately.
Kit for Foredom No. 52 handpiece Master Kit
#117-909
Quickly and easily achieve perfect results in all your stone-setting operations. Includes a Foredom No. 30 handpiece, AllSet handpiece attachments, complete set of guides and video.
Master Kit
#117-915
Prong-Setting Kit
#117-916
Produce consistent settings nearly 10 times faster than by hand! Includes AllSet handpiece attachment, 13 prong-setting guides, guide locking nut, Allen wrench and instructionsall in a fitted box.
#117-917
#117-955
Channel-Setting Kit
#117-958
Converts the milling assembly (top right) into a fully operational table saw and planer. Use with cutters and burs to cut, grind or plane gold, platinum, silver, wax and more. Positions within a 180 range and can be set in two different directions for maximum flexibility.
Fence Assembly Kit Channel-Setting Kit
Cut perfect channels and maximize your production. Includes AllSet handpiece attachment, three channel-setting guides, (small, large and knife-edge), guide locking nut, Allen wrench and instructionsall in a fitted box.
#117-957
#117-953
Pav-Setting Kit
#117-922
Prong setting has never been as fast or as accurate than with this new adjustable prong guide. The stainless steel guide assures a uniform height and level cut for perfect stone-setting every time. Designed to fit all AllSet kits.
Easy-Cut Prong Guide Pav-Setting Kit
AllSet handpiece attachment, seven pav guides (for setting a number of stones in a pattern to produce a field-of-stones effect), guide locking nut, Allen wrench and instructionsall in a fitted box.
#117-923
AllSet co-inventor and award-winning jeweler and tool designer, Jeffrey Mathews, shows you how to use this revolutionary system to speed stone-setting and increase accuracy. VHS, 31 minutes.
7500 Bluewater Road NW Albuquerque, NM 87121-1962 USA phone 800.545.6566 fax 800.965.2329 local 505.839.3300 international 505.839.3011 international fax 505.839.3016
2004 The Bell Group, Inc. All Rights Reserved. RGIS 117-956.qxd 0804JG