Documente Academic
Documente Profesional
Documente Cultură
Rodless cylinder, Series RTC-EG
; double-acting; with ` magnet; ball rail guide; E-Line Guide;
cushioning: pneumatic, adjustable; Easy-2-Combine-capable
Accessories
Cylinder mountings
End cover mounting, MF1
Foot mounting, M41, M48
Shuttle angle bracket S42
Adjustable articulated mounting, S44
T-groove nut
Sensors and sensor mountings, accessories
Shock absorber
Sensor, Series ST4
with cable; without wire end ferrule, tin-plated
Sensor, Series ST4
with cable; M8 plug, 3-pin
Sensor, Series ST4
with cable; M8x1 plug with knurled screw
Connecting cable with plug
M8 plug, 3-pin, with detent
Connecting cable with plug, M8x1
M8 socket, 3-pin
Connecting cable with plug and socket
Y-connector
Plug connection
M12x1 socket, 4-pin, A-coded; M12x1 plug, 4-pin, A-coded
``
Note: M40 available in online configurator that is MF1 and M41 combined.
Series RTC Rodless Cylinder- Inch Version
Series RTC-BV, bore sizes 5/8" - 3"
Double-acting, sensor magnet, internally guided, adj. pneumatic cushions
3
00125258
a24
Working pressure min/max 30 120 psi [2 to 8 bar]
Ambient temperature min./max. 14 F to 140 F (10 C to +60 C)
Medium temperature 14 F to 140 F (10 C to +60 C)
Medium compressed air acc. to ISO 8573-1: 2001
Compressed air class class 6-4-3, class 5-4-4
Pressure for determining piston forces 87 psi (6 bar)
Materials:
Cylinder tube aluminum, anodized
Slides aluminum, anodized
Cover aluminum, anodized
Seals polyurethane
Sealing strips stainless steel, polyurethane
Bore size [inch] 5/8" 1" 1" 1" 2"
Extended piston force [lbs] 27 66 108 170 264
Cushioning length [inch] 0.79 0.79 0.79 0.79 0.79
Cushioning energy [ft/lbs] 1.1 3 5.2 7.4 11.1
Speed max. [ft/s] 18 21.1 13.1 16.4 9.8
Port *10-32/M7 1/8 NPTF 1/8 NPTF 1/4 NPTF 1/4 NPTF
Weight 0 inch stroke [lbs] 1.0 1.83 2.26 4.6 7.43
+1" stroke [lbs] 0.075 0.125 0.175 0.25 0.35
Stroke max. [inch] 259" 275" 389" 389" 389"
Bore size [inch] 2" 3"
Extended piston force [lbs] 418 674
Cushioning length [inch] 0.79 0.79
Cushioning energy [ft/lbs] 18.5 29.5
Speed max. [ft/s] 9.8 9.8
Port 3/8 NPTF 3/8 NPTF
Weight 0 inch stroke [lbs] 12.46 21.41
+1" stroke [lbs] 0.55 0.875
Stroke max. [inch] 259" 188"
Configurable product
This product is configurable. Please use our configurator at www.boschrexroth` .com/pneumatics
or contact the nearest Bosch Rexroth sales office.
Rodless cylinder, Series RTC-CG
16 - 40` m; double-acting; with ` ; ball rail guide; Compact Guide;
cushioning: pneumatic, adjustable; Easy-2-Combine-capable
Rodless cylinder, Series RTC-HD
16 - 63mm; double-acting; with ` magnet; ball rail guide; Heavy Duty;
cushioning: pneumatic, adjustable; Easy-2-Combine-capable
Rodless cylinder, Series RTC-EG
16 - 32mm; double-acting; with ` magnet; ball rail guide; E-Line Guide;
cushioning: pneumatic, adjustable; Easy-2-Combine-capable
Accessories
Cylinder mountings
` F1
Foot mounting, M41, M48
Shuttle angle bracket S42
Adjustable articulated mounting, S44
T-groove nut
Sensors and sensor mountings, accessories
Shock absorber
Sensor, Series ST4
with cable; without wire end ferrule, tin-plated
Sensor, Series ST4
with cable; M8 plug, 3-pin
Sensor, Series ST4
with cable; M8x1 plug with knurled screw
Connecting cable with plug
M8 plug, 3-pin, with detent
Connecting cable with plug, M8x1
M8 socket, 3-pin
Connecting cable with plug and socket
Y-connector
Plug connection
M12x1 socket, 4-pin, A-coded; M12x1 plug, 4-pin, A-coded
Note: M40 available in online configurator that is MF1 and M41 combined.
Series RTC Rodless Cylinder- Metric Version
Series RTC-BV, bore sizes 16 - 80mm
Double-acting, sensor magnet, internally guided, adj. pneumatic cushions
23
00125258
a24
Working pressure min./max. 2 bar / 8 bar
Ambient temperature min./max. -10C / +60C
Medium temperature min./max. -10C / +60C
Medium Compressed air
Particle size max. 5 m
Oil content of compressed air 0 mg/m - 1 mg/m
Pressure for determining piston forces 6,3 bar
Materials:
Cylinder tube Aluminum, anodized
Covers Aluminum, anodized
Seals Polyurethane
Sealing strips Polyurethane; Stainless steel
Ball rail table Aluminum, anodized
Technical Remarks
The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C.
The oil content of air pressure must remain constant during the life cycle.
Use only the approved oils from Bosch Rexroth, see chapter Technical information.
Piston [mm] 16 25 32 40 50
Piston force [N] 127 309 507 792 1237
Cushioning length [mm] 20 20 20 20 20
Cushioning energy [J] 1.5 4 7 10 15
Speed max. [m/s] 5.5 6.5 4 5 3
Weight 0 mm stroke [kg] 0.45 0.82 1.39 2.09 3.37
+10 mm stroke [kg] 0.014 0.023 0.031 0.044 0.065
Stroke max. [mm] 6600 7000 9900 9900 9900
Piston [mm] 63 80
Piston force [N] 1964 3146
Cushioning length [mm] 20 20
Cushioning energy [J] 25 40
Speed max. [m/s] 3 3
Weight 0 mm stroke [kg] 5.65 9.71
+10 mm stroke [kg] 0.098 0.157
Stroke max. [mm] 6600 4800
Configurable product
This product is configurable. Please use our configurator at www.boschrexrothI .com/pneumatics
or contact the nearest Bosch Rexroth sales office.
Series RTC Rodless Cylinder- Metric Version
Series RTC-BV, bore sizes 16 - 80mm
Double-acting, sensor magnet, internally guided, adj. pneumatic cushions
24
Piston
Ports
16
25
G 1/8
32
G 1/8
40
G 1/4
50
G 1/4
Stroke 100 R480143252 R480141454 - - -
200 R480143255 R480141455 R480141462 - -
300 R480143256 R480141456 R480141463 - -
400 R480143257 R480141457 R480141464 R480141472 R480148854
500 R480143258 R480141458 R480141465 R480141473 R480146166
600 R480143259 R480141459 R480141466 R480141474 R480149081
700 R480143260 R480141460 R480141468 R480141475 R480145947
800 - R480141461 R480141469 R480141476 R480148600
900 - - R480141470 R480141477 R480147023
1000 - - R480141471 R480141478 R480149199
Piston
Ports
63
G 3/8
80
G 3/8
Stroke 100 - -
200 - -
300 - -
400 R480147730 R480147731
500 R480147713 R480147714
600 R480146014 R480146210
700 R480145948 R480155522
800 R480147223 R480147699
900 R480146204 R480156948
1000 R480147036 R480147700
Configurable product
This product is configurable. Please use our configurator at www.boschrexroth` .com/pneumatics
or contact the nearest Bosch Rexroth sales office.
Permissible forces Fx, Fy, Fz and torques Mx, My, Mz
00125850
00125255
With simultaneous moments on the cylinder this equation must be used in addition to the maximum moments check. In the cushioning
phase of the movement additional forces occur and must be considered. Please use our calculation tool for rodless cylinders on the www.
boschrexroth` .com/pneumatics.
25
G 1/4
32
G 1/4
40
G 1/4
Stroke 200 R480148169 R480146993 R480154848 R480156966
300 R480148470 R480146765 R480154708 R480150407
400 R480153838 R480147184 R480148680 R480153577
500 R480147715 R480146182 R480146674 R480146348
600 R480146105 R480147519 R480146692 R480149794
700 R480156308 R480146193 R480146396 R480156967
800 - R480148254 R480153429 R480146347
900 - - R480156962 R480156968
1000 - - R480153428 R480147888
25
G 1/W
32
G 1/W
40
G 1/4
50
G 1/4
Stroke 200 R480156949 R480149659 R480154726 R480155259 -
300 R480156950 R480149553 R480148820 R480154424 -
400 R480156951 R480150759 R480148602 R480154425 R480155175
500 R480147724 R480147725 R480147726 R480147727 R480147728
600 R480156953 R480153574 R480148603 R480148971 R480146987
700 R480156954 R480156959 R480154001 R480149554 R480156943
800 - R480155572 R480150325 R480156710 R480149774
900 - - R480156963 R480156969 R480156944
1000 - - R480148582 R480150515 R480149030
Piston
Ports
63
G 3/8
Stroke 200 -
300 -
400 R480156946
500 R480147729
600 R480156947
700 R480149638
800 R480154379
900 R480149592
1000 R480149031
Configurable product
This product is configurable. Please use our configurator at www.boschrexroth` .com/pneumatics
or contact the nearest Bosch Rexroth sales office.
Permissible forces Fx, Fy, Fz and torques Mx, My, Mz
00125850
00125257
With simultaneous moments on the cylinder this equation must be used in addition to the maximum moments check. In the cushioning
phase of the movement additional forces occur and must be considered. Please use our calculation tool for rodless cylinders on the www.
boschrexroth` .com/pneumatics.
Note: M40 available in online configurator that is MF1 and M41 combined.
Series RTC Rodless Cylinder - Accessories
Mounting kits
45
End cover mounting
for series RTC, MF1
0015774
See cylinder drawings for dimensions
0015781
Mounting screws for attachment to the cylinder are supplied.
Foot mounting
for series RTC, M41
0015775
001578
Part No. Weight Delivery
(lbs) quantity
R402002728 5/8", 1", 16mm, 25mm Galvanized steel 0.44 2
R402002729 1-1/4", 1-1/2", 32mm, 40mm Galvanized steel 0.66 2
R402002730 2", 50mm Galvanized steel 0.88 2
R402002731 2-1/2", 3", 63mm, 80mm Galvanized steel 1.1 2
Bore sizes Material
Weight Delivery
(lbs) quantity
R402003401 5/8", 1", 16mm, 25mm 1 6.8 30 60 Aluminum, anodized 0.11 2
R402003402 1-1/4", 1-1/2", 32mm, 40mm 1 8.8 30 60 Aluminum, anodized 0.15 2
R402003403 2", 2-1/2", 3", 50mm, 63mm, 80mm 1 13 40 80 Aluminum, anodized 0.44 2
R402003404 5/8", 1", 16mm, 25mm 2 6.8 30 Aluminum, anodized 0.07 4
R402003405 1-1/4", 1-1/2", 32mm, 40mm 2 8.8 30 Aluminum, anodized 0.09 4
Fig. W5 W7 W8 Part No. Bore sizes Material Wd1
Screws not included.
Dimensions, if not mentioned otherwise, in millimeters.
Note: M40 available in online configurator that is MF1 and M41 combined.
Note: M40 available in online configurator that is MF1 and M41 combined.
(M41)
(M48)
Series RTC Rodless Cylinder - Accessories
Mounting kits
46
Shuttle angle bracket S42
0015766
0015848
Weight
(lbs)
3174203000 1-1/4", 32mm 90 10 170 70 75 0.66 Aluminum, anodized black
3174203000 1-1/2", 40mm 90 10 181.4 70 75 0.66
3174203000 2", 50mm 90 10 197.1 70 75 0.66
SU TK TH Material Part No. Bore sizes CR DR
Mounting screws for attachment to the cylinder are supplied.
Dimensions, if not mentioned otherwise, in millimeters.
Adjustable articulated mounting
for series RTC, S44
0015768
0015839
Series RTC Rodless Cylinder - Accessories
Mounting kits/T-groove nuts
47
Adjustable articulated mounting
R402002403 5/8", 1", 16mm, 25mm 17.5 - 20 95 34 17 8 80 60 20 9 3
R402002404 1-1/4", 1-1/2", 32mm, 40mm 23 - 27 120 59 29.5 14 100 60 40 11 3
R402002405 2", 2-1/2", 3", 50mm, 63mm, 80mm 30.5 - 35 150 90 45 24 120 80 60 15 5
Material Weight
(lbs)
R402002403 Aluminum, anodized 0.15 - 0.4 M6 6.6 11 0.22
R402002404 Aluminum, anodized 0.15 - 0.4 M8 9 15 0.66
R402002405 Aluminum, anodized 0.15 - 0.4 M10 11 15 1.76
Part No. H RU
FF GT GU GV Part No. Bore sizes DH DU FU FV FE
RV RX
for series RTC, S44
Mounting screws for attachment to the cylinder are supplied.
Dimensions, if not mentioned otherwise, in millimeters.
0017083
Mge-031b-7
3842523140 N6 M4 1" - 1-1/2", 2540mm 5/8" - 1",1625mm Stainless steel 0.006 -
3842523142 N6 M5 1" - 1-1/2", 2540mm 5/8" - 1",1625mm Stainless steel 0.006 -
3842523145 N6 M5 1" - 1-1/2", 2540mm 5/8" - 1",1625mm Stainless steel 0.041 1)
3842514928 N8 M4 2" - 2-1/2", 5063mm 1-1/4" - 2-1/2", 3263mm Stainless steel 0.020 -
3842514929 N8 M5 2" - 2-1/2", 5063mm 1-1/4" - 2-1/2", 3263mm Stainless steel 0.018 -
3842514930 N8 M6 2" - 2-1/2", 5063mm 1-1/4" - 2-1/2", 3263mm Stainless steel 0.018 -
3842514931 N8 M8 2" - 2-1/2", 5063mm 1-1/4" - 2-1/2", 3263mm Stainless steel 0.015 -
3842516685 N8 M5 2" - 2-1/2", 5063mm 1-1/4" - 2-1/2", 3263mm Stainless steel 0.042 1)
Note T Bore Size 2) TT Bore Size 2) Weight
(lbs.)
Part No. Type Thread Material
1) Spring
) T / TT = T-slot in cylinder (series RTC)
Series RTC Rodless Cylinder - Accessories
Shock absorbers
48
Series RTC
Shock absorber, accessories
001560
001497
Part No. Cylinder load
[lbs]
Part
in drawing
16 mm
[5/8"]
25 mm
[1"]
32 mm
[1"]
40 mm
[1"]
50 mm
[2"]
63 mm
[2"]
R402002804 <8.8 1, RTC-HD
RTC-CG
R402002805 <17.6 1, RTC-HD
RTC-CG
RTC-HD
RTC-CG
RTC-HD
RTC-CG
R402002806 <50.7 1, RTC-HD RTC-HD
R402003618 >8.8 1, RTC-HD
RTC-CG
R402003619 >17.6 1, RTC-HD
RTC-CG
RTC-HD
RTC-CG
RTC-HD
RTC-CG
R402003620 >50.7 1, RTC-HD RTC-HD
R402003397 4 RTC-HD RTC-HD
R402002695 3 RTC-HD
RTC-CG
R402002696 3 RTC-HD
RTC-CG
RTC-CG
R402002698 3 RTC-HD
R402002699 3 RTC-CG
R402002700 3 RTC-HD
R402002701 3 RTC-HD RTC-HD
R402002702 4 RTC-HD
RTC-CG
R402002703 4 RTC-HD
RTC-CG
R402002704 4 RTC-HD
RTC-CG
RTC-HD
RTC-CG
Series RTC Rodless Cylinder - Accessories
Sensor, cable connection with leads
49
Sensor, series ST4
Cable connection
00118444_A
Ambient temperature min./max. 13 F to 167 F (5C to +75C)
Protection class
according to DIN EN 6059: 000
IP 67
Switching point precision 0,1 mm
Switching time on 0.5 ms
Switching time off 0.1 ms
LED yellow
Shock resistance 30 g / 11 ms
Vibration resistance 10 to 55 Hz, 1 mm
Materials:
Sensor polyamide
Cable polyurethane
Type
of contact
Cable length
L [inch]
AC
operating
voltage
[V]
DC
operating
voltage
[V]
DC
switching
current
[A]
Switching
capacity
[VA]
Protective
resistor
[]
Voltage
drop
[V]
Part No.
BN
BK
BU
RL
+ / / ~
/ + / ~
Reed
118" / 9' 10"
10 30 10 30 0.1 3 W / 5 VA 15 < 1,5
0830100640
197" / 16' 5" 0830100641
BN
BK
BU
RL
+
PNP
PNP solid-
state
118" / 9' 10"
10 30 0.1 3 W / 5 VA < ,5
0830100642
197" / 16' 5" 0830100643
BN
BK
BU
RL
+
NPN
NPN solid-
state
118" / 9' 10"
10 30 0.1 3 W / 5 VA < ,5
R412004989
197" / 16' 5" R412004990
Part No. Operating
current,
not switched
[mA]
Operating
current,
switched
[mA]
Max.
switching
frequency
[kHz]
Short-circuit
proof
Short-circuit
protected
LED
0830100640
- < 5 0.5 no yes yes
0830100641
0830100642
< 8 < 0 1 yes yes yes
0830100643
R412004989
< 8 < 0 1 yes yes yes
R412004990
Dimensions
C = sensor element
L = cable length
BN = brown, BK = black, BU = blue
B L
C
D
K
A
00127705
A [inch] B [inch] D [inch] K [inch]
0.11 0.990.016 3 x 0.0035" ~1.18
Series RTC Rodless Cylinder - Accessories
Sensor, with cable, M8 plug, 3-pin
50
Sensor, series ST4
00118444_c
Ambient temperature min./max. 13 F to 167 F (5C to +75C)
Protection class
according to DIN EN 6059: 000
'JH
2
0
M
1
2
x
1
~ 50
SW 22
4
1
2
3
M7 Adapter fittings
for use in speed optimized applications for 16mm & 5/8" bore sizes
Part No. Type Thread Tube O.D. Pack
Quantity*
1823373100 straight M7 4mm 25
1823373088 straight M7 6mm 25
R412005377 elbow M7 4mm 25
R412005378 elbow M7 6mm 25
R412004925 straight M7 1/8" 25
R412004926 straight M7 1/4" 25
*Order quantity multiple due to package quantity.
NOTICES TO PRODUCT USERS
1. WARNING: FLUID MEDIA
Bosch Rexroth pneumatic devices are designed and tested for use
with filtered, clean, dry, chemical free air at pressures and
temperatures within the specified limits of the device. For use with
media other than air or for human life support systems, Bosch
Rexroth must be consulted. Hydraulic cylinders are designed for
operation with filtered, clean, petroleum based hydraulic fluid;
operation using fire-resistant or other special types of fluids may
require special packing and seals. Consult the factory.
2. WARNING: MATERIAL COMPATIBILITY
Damage to product seals or other parts caused by the use of non-
compatible lubricants, oil additives or synthetic lubricants in the air
system compressor or line lubrication devices voids Bosch
Rexroth's warranty and can result in product failure or other
malfunction. See lubrication recommendations below.
AIR LINE LUBRICANTS! In service higher than 18 cycles per
minute or with continuous flow of air through the device, an air line
lubricator is recommended. * (Do not use line lubrication with
vacuum products.) However, the lubricator must be maintained
since the oil will wash out the grease, and lack of lubrication will
greatly shorten the life expectancy. The oils used in the lubricator
must be compatible with the elastomers in the device. The
elastomers are normally BUNA-N, NEOPRENE, VITON, SILICONE
and HYTREL. Bosch Rexroth recommends the use of only
petroleum-based oils without synthetic additives, and with an
aniline point between 180and 210F.
COMPRESSOR LUBRICANTS! All compressors (with the
exception of special "oil free" units) pass oil mist or vapor from the
internal crankcase lubricating system through to the compressed
air. Since even small amounts of non-compatible lubricants can
cause severe seal deterioration (which could result in component
and system failure) special care should be taken in selecting
compatible compressor lubricants. It is recommended that users
review the National Fluid Power Association "Recommended
Guide Lines For Use Of Synthetic Lubricants In Pneumatic Fluid
Power Systems" (NFPA T1-1978).
3. WARNING: INSTALLATION AND MOUNTING
The user of these devices must conform to all applicable electrical,
mechanical, piping and other codes in the installation, operation or
repair of these devices.
INSTALLATION! Do not attempt to install, operate or repair these
devices without proper training in the technique of working on pneumatic
or hydraulic systems and devices, unless under trained supervision.
Compressed air and hydraulic systems contain high levels of stored
energy. Do not attempt to connect, disconnect or repair these products
when system is under pressure. Always exhaust or drain the pressure
from system before performing any service work. Failure to do so can
result in serious personal injury.
MOUNTING! Devices should be mounted and positioned in such
manner that they cannot be accidentally operated.
4. WARNING: APPLICATION AND USE OF PRODUCTS
The possibility does exist for any device or accessory to fail to operate
properly through misuse, wear or malfunction. The user must consider
these possibilities and should provide appropriate safe guards in the
application or system design to prevent personal injury or property
damage in the event of malfunction.
5. WARNING: CONVERSION, MAINTENANCE AND REPAIR
When a device is disassembled for conversion to a different
configuration, maintenance or repair, the device must be tested for
leakage and proper operation after being reassembled and prior to
installation.
MAINTENANCE AND REPAIR! Maintenance periods should be
scheduled in accordance with frequency of use and working conditions.
All Bosch Rexroth products should provide minimum of 1,000,000
cycles of maintenance free service when used and lubricated as
recommended. However, these products should be visually inspected
for defects and given an "in system" operating performance and leakage
test once a year. Where devices require major repair as result of the
one million cycles, one year, or routine inspection, the device must be
disassembled, cleaned, inspected, parts replaced as required, rebuilt
and tested for leakage and proper operation prior to installation. See
individual catalogs for specific cycle life estimates.
6. PRODUCT CHANGES
Product changes including specifications, features, designs and
availability are subject to change at any time without notice. For critical
dimensions or specifications, contact factory.
*Many Bosch Rexroth pneumatic components can operate with or
without air line lubrication; see individual sales catalogs for details.
--Refer to the appropriate service catalog for parts and service information.
LIMITATIONS OF WARRANTIES & REMEDIES
Bosch Rexroth warrants its products sold by it to be free from defects in material and workmanship to the following:
For twelve months after shipment Bosch Rexroth will repair or replace (F.O.B. our works), at its option, any equipment which under normal
conditions of use and service proves to be defective in material or workmanship at no charge to the purchaser. No charge will be made for labor
with respect to defects covered by this Warranty, provided that the work is done by Bosch Rexroth or any of its authorized service facilities.
However, this Warranty does not cover expenses incurred in the removal and reinstallation of any product, nor any downtime incurred, whether or
not proved defective.
All repairs and replacement parts provided under this Warranty policy will assume the identity, for warranty purposes, of the part replaced, and the
warranty on such replacement parts will expire when the warranty on the original part would have expired. Claims must be submitted within thirty
days of the failure or be subject to rejection.
This Warranty is not transferable beyond the first using purchaser. Specifically, excluded from this Warranty are failures caused by misuse,
neglect, abuse, improper operation or filtration, extreme temperatures, or unauthorized service or parts. This Warranty also excludes the use of
lubricants, fluids or air line additives that are not compatible with seals or diaphragms used in the products. This Warranty sets out the
purchaser's exclusive remedies with respect to products covered by it, whether for negligence or otherwise. Neither, Bosch Rexroth nor any of its
affiliates will be liable for consequential or incidental damages or other losses or expenses incurred by reason of the use or sale of such products.
Our liability (except as to title) arising out of the sale, use or operation of any product or parts, whether on warranty, contract or negligence
(including claims for consequential or incidental damage) shall not in any event exceed the cost of replacing the defective products and, upon
expiration of the warranted period as herein provided, all such liability is terminated. THIS WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, WHETHER FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
OTHERWISE. No attempt to alter, amend or extend this Warranty shall be effective unless authorized in writing by an officer of Bosch Rexroth
Corporation.
Bosch Rexroth reserves the right to discontinue manufacture of any product, or change product materials, design or specifications without notice.
Bosch Rexroth AG
04_Body text U4_7.7 pt/3.84 mm
Address
USA
Bosch Rexroth Corporation
Corporate Headquarters
5150 Prairie Stone Parkway
Hoffman Estates, IL 60192-3707
Telephone (847) 645-3600
Facsimile (847) 645-6201
Bosch Rexroth Corporation
Electric Drives and Controls
5150 Prairie Stone Parkway
Hoffman Estates, IL 60192-3707
Telephone (847) 645-3600
Facsimile (847) 645-6201
Bosch Rexroth Corporation
Hydraulics
2315 City Line Road
Bethlehem, PA 18017-2131
Telephone (610) 694-8300
Facsimile (610) 694-8467
8 Southchase Court
Fountain Inn, SC 29644-9018
Telephone (864) 967-2777
Facsimile (864) 967-8900
Bosch Rexroth Corporation
Linear Motion and Assembly
Technologies
816 E. Third Street
Buchanan, MI 49107
Telephone (800) 322-6724
Facsimile (269) 695-3446
14001 South Lakes Drive
Charlotte, NC 28273
Telephone (800) 438-5983
Facsimile (704) 583-0523
Bosch Rexroth
Regional Sales Ofces:
Central
Bosch Rexroth Corporation
2150 Point Boulevard, Suite 800
Elgin, IL 60123
Telephone (224) 293-3551
Facsimile (847) 551-9812
Great Lakes
Bosch Rexroth Corporation
2730 Research Drive
Rochester Hills, MI 48309
Telephone (248) 267-4000
Facsimile (248) 853-2033
Northeast
Bosch Rexroth Corporation
99 Rainbow Road
East Granby, CT 06026
Telephone (860) 844-8377
Facsimile (860) 844-8595
Bosch Rexroth Corporation
2315 City Line Road
Bethlehem, PA 18017-2131
Telephone (610) 694-8300
Facsimile (610) 694-8467
Other North America
Bosch Rexroth Canada
3426 Mainway Drive
Burlington, Ontario L7M 1A8
Telephone (905) 335-5511
Facsimile (905) 335-4184
www.boschrexroth.ca
Bosch Rexroth, S.A. de C.V.
Calle Neptuno # 72
Unidad Industrial Vallejo
CP 07700 Mexico, D.F.
Telephone (555) 754-1711
Facsimile (555) 752-5943
Southeast
Bosch Rexroth Corporation
14001 South Lake Drive
Charlotte, NC 28273
Telephone (800) 438-5983
Facsimile (704) 583-0523
Southwest
Bosch Rexroth Corporation
1520 Selene Drive, Suite 104
Carrollton, TX 75006
Telephone (972) 245-6718
Facsimile (972) 242-2850
West
Bosch Rexroth Corporation
7901 Stoneridge Drive, Suite 220
Pleasanton, CA 94588
Telephone (925) 227-1074
Facsimile (925) 227-1081
Bosch Rexroth Corporation
13766 Alton Parkway, Suite 147
Irvine, CA 92618-1622
Telephone (949) 609-1640
Facsimile (888) 873-3434
Further contacts
www.boschrexroth.com/
addresses
The data specied herein only
serves to describe the product.
No statements concerning a
certain condition or suitability
for a certain application can be
derived from our information.
The given information does not
release the user from obligation
of own judgment and verica-
tion. It must be remembered
that our products are subject
to a natural process of wear
and aging.
This document, as well as the
data, specications and other
information set forth in it, are
the exclusive property of Bosch
Rexroth Corp. Without their
consent it may not be repro-
duced or given to third parties.
Bosch Rexroth Corporation
Pneumatics
1953 Mercer Road
Lexington, KY 40511-1021
Telephone (859) 254-8031
Facsimile (859) 254-4188
pneumatics@boschrexroth-us.com
www.boschrexroth-us.com/brp
SC-200.15/07.10 Replaces SC-200.15/06.08
Bosch Rexroth Corporation 2010 Printed in the United States