Documente Academic
Documente Profesional
Documente Cultură
Software overview
Software features
Typical applications and features of programs are illustrated in the associated data sheet H-2000-2289. Please refer to the programming manual supplied with each software package for a complete specification of the software package.
User documentation
Programming manuals are supplied in English, but other languages are also available for some packages.
Inspection and tool setting software for lathes (including Y axis, C axis option and special tool
setting software) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
A totally integrated package of software that includes vector and angle measure options, print options (where this control option is available) and an extended range of cycles. Includes an SPC cycle, 1 or 2 touch probing option, tool offset compensation by percentage of error and output data stored in an accessible variable stack.
Inspection and tool setting software for lathes and mill/turn machines
(including Y axis and non-contact tool setting) . . . . . . . . . . . . 4
10
EasySet enables the operator to position the probe stylus at a suitable start position in jog mode before running an inspection cycle, thereby minimising programming requirements.
11
13
Basic inspection/job set-up software with the ability to set work offsets, update tool offsets and print inspection results (where this control option is available). Suitable for use by an operator or part programmer.
Preferred for applications using delicate tools, and other applications where the probe must not obstruct the machines working envelope. Non-standard applications are available on request, subject to confirmation.
AxiSet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 AxiSet Check-Up provides machine users with a fast and accurate health check of rotary axes.
14
Lathe
HPMA OLP40
Controller
Fanuc Macro A 0T MATE, A, B, C, F Fanuc Macro B B, C, F 0T, 6T, 10-15T, 15iT, 16-21T / iT, 30-32iT Fanuc Y axis Haas Hitachi Seicos Llll (L3), L10 Hitachi Hi-cell Sigma 16, 18, Lambda L3, L10 Mazak (QTN range) M Plus / Fusion 640 Matrix Nexus / Smart Meldas L64 M600/700 (2 axis) Y axis M600/700 (3 axis) Num 750, 760, 1060 Okuma U100/P200L Siemens 810, 820, 840, 850, 880 840C 810D, 828D, 840D 802D Traub TX8, TX8D Yasnac LX3
Inspection
Part number A-4012-0477 Memory (KB) 1 7.0
Tool setting
Part number A-4012-0530 Memory (KB) 1 6.0
A-4012-0541 2 3
A-4012-1092 2 A-4012-0874
2
A-4012-0612 2 A-4012-0843 2
31 KB standard cycles + 18 KB extended cycles dependent on machine options fitted. 26.0 36.0 10.7 7.0 35.0 20.0 22.0 14.0 12.4 12.4 19.0 2.7 10.1 A-4013-0066 A-4012-0961 A-4014-0068 A-4014-0068 A-4014-0130 A-4014-0433 A-4006-0011 17.0 9.0 9.3 9.7 27.2 19.0 6.7
A-4013-0071 2 A-4013-0137 2 A-4013-0028 2 A-4013-0250 A-4013-0154 2 A-4013-0254 A-4012-0929 A-4016-1047 2 A-4014-0066 A-4014-0066 A-4014-0137 A-4006-0009 A-4014-0011
Inspection
Part number A-4012-0653 Memory (KB) 1 2.8
Tool setting
Part number Memory (KB) 1
A-4012-0709
3.2
Inspection
Part number Memory (KB)
1
Notes: Please quote part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available function dependent on control. 3 This includes C axis cycles 4 Manual or manual with automatic option. 5 Manual cycles with driven tools.
Inspection and tool setting software for multi-axis lathes and mill/turn machines
Typical machine and Renishaw products used with this software:
Controller
Doosan MX series (Fanuc) Mazak Y axis lathes e.g. Multiplex, Quadrex, QTN-Y Integrex (not e-Series) M Plus / Fusion 640 MT Pro Matrix (not Integrex series) Mazak Integrex e-Series lathes Fusion 640 M Pro Integrex e-Series / i-Series / j-series Matrix / Matrix Nexus Integrex Mark IV lathes Matrix Mori Seiki Y axis lathes NT / MT series (Fanuc) Nakamura Super NX (Fanuc)
Inspection
Part number A-4012-1016 2 Memory (KB) 1
Tool setting
Part number Memory (KB) 1
A-4013-0030 2 A-4013-0168 2
27.0 79.0
A-4013-0066
17.0
A-4013-0083 2
71.0
A-4013-0106 2
91.0
A-4013-0159
14.9
Inspection and tool setting software for lathes and mill/turn machines continued
Non-contact tool setting
A typical machine and Renishaw product used with this software:
Multi-axis lathe
NC4
Controller
Mazak Integrex e-Series lathes Fusion 640M Mazak Y axis lathe Fusion 640M Mazak Integrex e-Series / i-Series / Mark IV lathes Matrix / Matrix Nexus Mori Seiki NT / MT series (Fanuc)
A-4013-0092
29.0
A-4013-0566
29.0
A-4013-0123
29.0
A-4012-1020
19.0
Notes: Please quote part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available function dependent on control.
Controller Fanuc Macro B 0M, 6M, 10-15M,15iM, 16-21M / iM, 30-32iM Haas Mitsubishi Meldas M3, M310, M320, M330, M520, M600, M700 series Siemens 802D 810D V5+, 828D, 840D V5+ 6 Yasnac MX3, I80, J50, J100, J300
Notes: Please quote part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 6 Siemens V5+ probing software will not run on previous versions of 810D and 840D controls.
Controller
Fadal 32MP, CNC88, CNC88HS Fanuc Macro A 0M MATE, 0MA, 0MB, 0MC Fanuc Macro B 0M, 6M, 16-21M / iM, 30-32iM 10-15M, 15iM GE 2000 Haas Heidenhain TNC 151, 155, 351, 355 (A, B, BR, P, Q and QR series) 407, 415, 2500, 360 Heidenhain print option (Macro and PC utility) Mazak M32, Fusion 640M (EIA / ISO offsets) M32, M Plus, Fusion 640M (EIA / ISO and Mazatrol compatible) Mitsubishi Meldas M3, M310, M320, M335, M500, M600, M700 series Selca S3000, S4000 Siemens 810, 820, 840, 850, 880, 840C
A-4014-0050 A-4014-0056
8.2
Notes: Please quote part number when ordering. Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available function dependent on control.
1
Vector measure
Part number A-4012-0527 A-4012-0527 Memory (KB) 1 8.4 8.4
Angle measure
Part number A-4012-0549 Memory (KB) 1 3.3
RMP60
Controller
Fanuc Macro B 0M, 16-21M / iM, 30-32iM 10-15M, 15iM Siemens 810D, 840D
Notes: Please quote part number when ordering. Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available function dependent on control.
1
OMP60
RENGAGE type probes only (MP700, OMP400 and RMP600) Part number A-4012-0685 A-4012-0890 A-4012-0761 Memory (KB) 1 47.0 46.5 46.2
Controller
Brother 32A (post June 2002) 32B Fanuc Macro B 0M, 10-15M, 15iM, 16-21M / iM, 30-32iM Haas Hitachi (Fanuc special) Hitachi Seicos 10, 16, 18, MIII (M3), Lambda Hurco WinMax Makino Pro 3, Pro 5 Mazak M32, M Plus and Fusion 640M (EIA / ISO and Mazatrol compatible) Matrix M including Variaxis Matrix / Matrix Nexus VTC800 5 axis Matrix (EIA / ISO and Mazatrol compatible) Milltronics Mitsubishi Meldas M3, M310, M320, M330, M335 series M50 / M500 series M64, Magic 64, M600, M700 series Mori Seiki MS series NUM 750, 760, 1020-1060 (currently metric mode only)
Part number A-4012-0908 A-4012-1028 A-4012-0516 2 A-4012-0880 2 A-4012-0673 2 A-4012-0749 2 A-4012-1126 2 A-4012-0719 2
Memory (KB) 1 35.0 35.0 47.0 46.9 47.0 59.3 46.0 51.0
A-4013-0023 2
48.0
A-4013-0040
47.0
A-4013-0112 2
48.0
A-4013-0205 2 A-4012-1178 2
52.0 71.0
A-4012-0685 A-4012-0942
Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. Print option available function dependent on control.
Controller
Okuma OSP, 5020M, 700M, 7000M OSP U10M / U100M / P200M Tosnuc 888M Siemens 802D 810D V5+, 828D, 840D V5+ 6 Siemens R Print utility 840D Yasnac MX3, J50, I80, J100, J300
Controller
Haas Fanuc Macro B 0M, 6M, 10-15M, 15i, 16-21M, 16-21i, 30-32iM
Inspection
Part number A-4012-0899
2
A-4012-0785 2
Notes: Please quote Part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available function dependent on control. 6 Siemens V5+ probing software will not run on previous versions of 810D and 840D controls.
10
TS27R
Controller
Brother 32A (post June 2002) 32B Fadal 32MP, CNC88, CNC88HS Fanuc Macro A 0M MATE, 0MA, 0MB, 0MC Fanuc Macro B 0M, 6M, 16-21M / iM, 10-15M, 15iM, 30-32iM GE 2000 Haas Hitachi Seicos Hurco WinMax Mazak M32, M Plus, Fusion 640M (EIA / ISO and Mazatrol compatible) Matrix / Matrix Nexus Milltronics Mitsubishi Meldas M3, M310, M320, M335, M500, M600, M700 series NUM 750, 760, 1020, 1060 Okuma U10M / U100M / P200M Selca 3000 / 4000 series
Memory (KB)1 14.0 27.0 13.2 12.0 9.3 2.6 8.0 10.0 28.0
A-4012-0817 7 A-4012-1145 7
11
12
Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. Includes rotating tool setting. Siemens V5+ probing software will not run on previous versions of 810D and 840D controls. Please contact your local Renishaw office if software for earlier 810D or 840D controls is required.
NC4
Controller
Brother 32A (post June 2002) 32B Fadal 32MP / CNC88 Fanuc Macro B 0M, 6M, 16-21M / iM, 10-15M, 15iM, 30-32iM (includes angled beam option) Haas Heidenhain 426, 430 i530, i530 HSCI Hitachi Seiki Sigma 16 / 18M Hurco WinMax Makino Pro 3, Pro 5 (includes angled beam option) Mazak (EIA / ISO and Mazatrol compatible) M32, M Plus, Fusion 640M Mazak angled beam Fusion 640M Mazak (includes angled beam option) Standard machines and VTC800 Matrix / Matrix Nexus / Smart Mitsubishi Meldas M3, M310, M320, M335, M500, M600, M700 series
A-4013-0062 A-4013-0088
26.0 32.0
A-4013-0119 A-4013-0050
41.0 20.0
13
Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom
A-4014-0020 A-4014-0025
21.0 28.2
A-5642-4009
56.0
A-5642-4005
56.0
A-5642-4001 A-5642-4401
29.0 41.0
A-5642-4501
51.0
For worldwide contact details, please visit our main web site at www.renishaw.com/contact
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT. 2008 2011 Renishaw plc. All rights reserved. Issued 11.11
*H-2000-2298-11*
Part no. H-2000-2298-11-A