Documente Academic
Documente Profesional
Documente Cultură
FIRST TERM SECOND ( 3RD TERM) 04-BATCH OF B.E (TEXTILE) REGULAR PRACTICAL EXAMINATION 2005 UNDER (EXTERNAL SYSTEM) SUBJECT:TEXTILE MACHINE DESIGN Time Allowed: 30 Minutes ID.NO. Max. Marks: 15
DEFINE THE FOLLOWING: (i) (ii) (iii) (iv) (v) (vi) (vii) Types of load. Types of coupling. Rolling Contact Bearing. Stepped or cone pulley drive. Bevel Gear. Hand Lever. General procedure for design.
FILL IN THE BLANKS. 1. The Metals which have the iron constituent is known as ______________. 2. When the system of ______________acts on a body, which undergoes some deformation. This deformation per unit length is known as strain 3. The two equal & opposite __________________(called compressive load) act of a body , the stress and string produced is known as compressive stress & strain.
4. The stress lower than the maximum or ultimate at which the______________ of material take place, is known as working stress. 5. Solid Journal Bearing is the ____________________ form of Journal Bearing. 6. The Belts or Ropes are used to transmit power from one shaft to another by means of _______________________. 7. Gear is a machine element which transmitted the power when the distance between the driver and the follower is _________________________. 8. A foot lever is similar to hand lever, but in this case of foot plate is provides instead of _________________________. M. C. Q. 1. Metals and their alloys have the general properties of strength, hardness and the ability to __________________ heat and electricity. (Produce, conduct, absorb). 2. When two equal and opposite tangential forces act on a body the stress and Strain are known as ______________ stress & strain (shear, tensile, impact). Contd on Page No./-2
(-2-)
3. The Coupling can also dissmelted for ______________ ( Joining, Assembling, Maintenance and repair) 4. The V-Belt drive is used, where great amount of_______________ is to be transmitted from one pulley to another. (force-power-energy). 5. In External gearing the larger of these two wheel is called annular and smaller is called ______________. (Gear, Rack, Pinion). 6. In foot step or Pivot Bearing the loaded shaft is ___________, and the end of shaft test within bearing vertical -- angular -- horizontal). 7. A ___________ is used as a machine to lift a load by the application of a small effort. (handle - gear - lever). TRUE & FALSE. 1. Those metals, which have the metal other than iron as their main constituent is known as Non-ferrous metals. ( ) 2. The load is defined as any internal force acting on a machine part. ( 3. )
In order to transmit power form one shaft to another the various numbers such as pulleys, gears etc are mounted on it. ( ) ( )
4. The keys are used for permanent fastening between shaft &: hub. 5. The Bearing is also known as journal. ( ) ) )
THE END