Documente Academic
Documente Profesional
Documente Cultură
MINING EQUIPMENT
we provide our Customers with high-productive, reliable machines with high level of automation, ensuring efficient mining and being ecologically acceptable.
TECHNICAL SERVICE
improvements of technical service are the priority direction in
the activity of United Heavy Machinery. Skilled personnel, unique equipment and modern technologies represent the basis of our service.
SERVICE
monitoring the technical condition of the equipment during operation, preparation of repairs and overhauls of the equipment; delivery of spare parts; submission of conclusions on extension of the equipment service life; designing of service and repair documentation; revamping of existing equipment.
SBSh-270IZ is designed for drilling in open pits vertical and inclined blast holes of 250 and 270 mm diameter to the depth of 32 m.
WALKING DRAGLINES
walking draglines are high-efficient and reliable machines working in all the fields of open pit mining, as well as in construction. They are designed for stripping over-burden with direct dumping the waste either into the mined-out space or to the pit side. we offer our Customers 13 types of walking draglines
with bucket capacity from 11 up to 100 m3 and boom length from 75 to 130 m. ESh 11.75 base model ESh 20.90 base model ESh 15.100 modification ESh 20.90 ESh 25.90 base model ESh 20.100 modification ESh 25.90 ESh 15.110 modification ESh 25.90 ESh 40.100 base model ESh 30.110 modification ESh 40.100 ESh 25.120 modification ESh 40.100 ESh 65.100 base model ESh 40.130 modification ESh 65.100 ESh 100.100 base model ESh 100.125 base model
The figures in designation stand for bucket capacity in m3, boom length in m
EXCAVATORS
design features:
the rigid triangular boom and the revolving frame that forms a threedimensional load-bearing unit with superstructure ensure safe, steady and high-efficient operation during the entire working life of the dragline; hydraulic walking mechanism allows to achieve smooth walking and high maneuverability; electric machines and control systems are designed for specific working conditions of the dragline. On Customer's request we offer models with reduced up to 20-25% ground bearing pressure, which ensures the more efficient use of draglines on the soft ground and on dumps.
EXCAVATORSDRAGLINES CRAWLER-MOUNTED
we offer our Customers a range of crawler-mounted draglines providing the most efficient combination of productivity and mobility. EDG-3,2.30 modification EKG-5 with dragline equipment EDG-4.25 modification EKG-5 with dragline equipment EDG-3,2.30D with diesel-electric drive EDG-8.55 modification EKG-12 with dragline equipment
design features:
individual electric drive of all main mechanisms; propel drive with continuous operation time; the availability with widened crawlers; high degree of unification with the base models. On request our specialists customize the equipment according to the specific operational conditions.
MINING SHOVELS
being furnished with the independent propel drive and other
highly efficient units, they are your best choice for open pit mining, are appropriate for loading in different transport facilities.
Depending on operation conditions we offer our Customers shovels with rack or cable crowd.
UNITED HEAVY MACHINERY | MINING EQUIPMENT
EXCAVATORS
EKG-12 base model EKG-12V with active front-end equipment EKG-9Us with elongated front-end equipment EKG-20 base model EKG-16Us with elongated front-end equipment
The figures in designation stand for bucket capacity in m3. Us stands for elongated front-end equipment and discharge at the floor level
design features:
the front-end equipment elements are made of high-strength steel ensuring trouble-free operation at heavy dynamic loads; planetary swing reduction gears are more compact and have larger load-carrying capacity; cable reel with automatic cable reeling and unreeling when moving shortens the time losses; the electric drive control system provides optimum mechanical parameters of the drives with high efficiency. Shovels are produced for various climatic conditions of operation.
EGO-150 (EGO-4) backhoe EGO-350 backhoe EG-150 face shovel EG-350 face shovel EG-5,5 face shovel Due to the specific kinematics of the front-end equipment backhoes have a widened range of technological possibilities. These machines are capable to mine rock below floor level as well as at higher levels, what increases their working zone. The highest output is achieved while loading transport facilities positioned below the floor level, thanks to the reduction of the swing angle and bucket hoist height.
CONE CRUSHERS
cessing plants and in mines around the world. Many of these crushers operate continuously without standby units.
The full crusher designation includes crusher type and the width of feed and discharge openings in mm
If you are looking for a special application take a good look at our purpose-designed crushers, which are also available. They include units for in-pit crushing on mobile platforms, for crushing ores with low surface friction, for crushing extra tough and hard materials.
The main design features of our primary and secondary cone crushers making them high competitive with like machines of other manufacturers are: unique hydraulic support for the mainshaft ensuring the long-lasting reliable operation; simple, rigid design of mainshaft with the use of high-alloy heat treated steels and hardening treatment of working surfaces; built-in maintenance equipment facilitating the time-consuming processes of installation and maintenance.
The designation of a crusher includes its type, crushing head base diameter, modification of crushing chamber (Gr, Gr2 for coarse crushing; T, T2, T3 for fine crushing) and addi-
UHM intermediate and fine cone crushers are in operation at mines and quarries all around the world. Choosing our crushers, you get indisputable advantages: a considerable range of crusher types ensures the most efficient choice of appropriate modification for specific operating conditions; reliable drive, optimum type of the crushing chamber, increased wear resistance of the lining and high level of built-in equipment for the time-consuming maintenance processes reduce the operation costs; on Customer's request we supply crushers equipped with automated control system allowing to built them in automated process control system. 7
ROLL CRUSHERS
single-roll crushers with toothed rolls for hot sinter
DOZ-13003150 DOZ-13004200
The devices are intended to prepare blasted rock for transportation with the belt conveyors.
MILLS
our mills are widely used in the
iron and steel, mining and other branches of industry. They are designed for wet and dry grinding ferrous, non-ferrous and rare metals ores, limestone, dolomite and other materials, including highly abrasive and durable ones. If you choose our mills for your technologies we guarantee: high output and stable product size gradation; reliability in operation and easy maintenance; low consumption of lining elements.
UNITED HEAVY MACHINERY | MINING EQUIPMENT
United Heavy Machinery (Uralmash-Izhora Group) Ermolaevskiy per., 25, str. 1, Moscow, 123379 tel.: +7 095 974 6021, fax: +7 095 796 9003 e-mail: mail@omz.ru http://www.omz.ru
UHM Mining Equipment pr. Lenina, 1, Kolpino, St. Petersburg, 196651 tel./fax: +7 812 322 8761 e-mail: omzgo-spb@omz.ru Pervoy Pyatiletki sqr., Yekaterinburg, 620012 tel.: +7 3432 366 200, fax: +7 3432 366 702 e-mail: omzgo-ekt@omz.ru