Documente Academic
Documente Profesional
Documente Cultură
QUINT-PS/24DC/24DC/ 5
Order No.: 2320034
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320034
QUINT DC/DC converter, with SFB technology, primary-switched, input: 24 V DC, output: 24 V DC/5 A
H051 1 pcs. Page 608 (IF-2011) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads.
Product description Der QUINT DC-DC-Wandler 24 V/5 A setzt die Gleichspannung von 14 V ... 18 V in eine einstellbare, geregelte und galvanisch getrennte 24-V-Ausgangsspannung um. Steht zur Versorgung einer Last keine geregelte und stabile 24-VGleichspannung zur Verfgung, gewhrleistet der DC-DC-Wandler die Anpassung des 24-V-Verbrauchers: Aus einer ungeregelten Gleichspannung wird eine einstellbare Ausgangsspannung von 18 V ... 29,5 V erzeugt.
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320034
Technical data Input data Nominal input voltage DC input voltage range 24 V DC 18 V DC ... 32 V DC 14 V DC ... 18 V DC (during operation, derating < 18 V DC: UOUT MAX - 5%/V, I OUT NOM - 2.5%/V)) DC frequency range Current consumption Inrush surge current Power failure bypass Input fuse Permissible backup fuse Type of protection Protective circuit/component Output data Nominal output voltage Setting range of the output voltage Output current 24 V DC 1% 18 V DC ... 29.5 V DC (> 24 V constant capacity) 5 A (-25 C ... 60 C) 6.25 A (with POWER BOOST, -25C ... 40C permanently, UOUT = 24 V DC) 30 A (SFB technology, 12 ms) Magnetic fuse tripping Derating Connection in parallel Connection in series Max. capacitive load Current limitation Control deviation C2 60 C ... 70 C (2.5%/K) Yes, for redundancy and increased capacity Yes Unlimited Approx. 18 A < 1 % (change in load, static 10% ... 90%) < 2 % (change in load, dynamic 10% ... 90%) < 0.1 % (change in input voltage 10%) Residual ripple Peak switching voltages nominal load Maximum power dissipation idling Power loss nominal load max. < 20 mVPP < 10 mVPP (20 MHz) 2.4 W 11.4 W 0 Hz Typ. 7 A (24 V DC) < 15 A (typical) > 10 ms (24 VDC) 15 A (internal (device protection)) B10 B16 Transient surge protection Varistor
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320034
General data Width Height Depth Width with alternative assembly Height with alternative assembly Net weight Efficiency Insulation voltage input/output Degree of protection Protection class MTBF (IEC 61709, SN 29500) Ambient temperature (operation) Ambient temperature (storage/transport) Max. permissible relative humidity (operation) Mounting position Assembly instructions Electromagnetic compatibility Noise immunity Standard Electrical equipment of machines Standard - Safety of transformers Standard - Electrical safety Standard Electronic equipment for use in electrical power installations and their assembly into electrical power installations Standard Safety extra-low voltage Standard - Safe isolation UL approvals 32 mm 130 mm 125 mm 122 mm 130 mm 35 mm 0.7 kg > 92 % 1 kV (routine test) 1.5 kV (type test) IP20 III > 500 h -25 C ... 70 C (> 60 C derating) -40 C ... 85 C 95 % (at 25 C, no condensation) horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Conformance with EMC Directive 2004/108/EC EN 61000-6-2:2005 EN 60204-1 EN 61558-2-17 EN 60950-1 EN 50178
EN 60950-1 (SELV) EN 60204-1 (PELV) DIN VDE 0100-410 UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950
Connection data, input Connection method Conductor cross section solid min. Conductor cross section solid max. Pluggable screw connection 0.2 mm 2.5 mm
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320034
Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Screw thread Connection data, output Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Signaling Output name Output description Maximum inrush current Status display Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Tightening torque, min Tightening torque max Screw thread Output name Output description Maximum inrush current Status display Output name
0.2 mm 2.5 mm 24 12 8 mm M3
DC OK active UOUT > 0.9 x UN: High signal < 20 mA (short-circuit resistant) "DC OK" LED green 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 0.5 Nm 0.6 Nm M3 POWER BOOST, active IOUT < IN: High signal < 20 mA (short-circuit resistant) "BOOST" LED yellow/IOUT > IN :LED on UIN OK, active
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320034
UIN > 19.2 V: High signal < 20 mA (short-circuit resistant) LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on
Certification
Accessories Item General 2938196 2320089 2938235 QUINT-PS-ADAPTERS7/1 UTA 107/30 UWA 182/52 Assembly adapter for QUINT-PS... power supply on S7-300 rail Universal DIN rail adapter Universal wall adapter Designation Description
QUINT-PS/24DC/48DC/ 5
Order No.: 2320128
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320128
H053 1 pcs. Page 609 (IF-2011) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads.
Product description The QUINT 48 V/5 A DC/DC converter converts a DC voltage of 18 V ... 32 V to an adjustable, regulated, and electrically isolated 48 V output voltage. If no regulated and stable 48 V DC voltage is available to supply a load, the DC/DC converter ensures the adjustment of the 48 V load: from an unregulated DC voltage, an adjustable output voltage of 30 V ... 56 V is generated.
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320128
Technical data Input data Nominal input voltage DC input voltage range DC frequency range Current consumption Inrush surge current Power failure bypass Input fuse Permissible backup fuse Type of protection Protective circuit/component Output data Nominal output voltage Setting range of the output voltage Output current 48 V DC 1% 30 V DC ... 56 V DC (> 48 V constant capacity) 5 A (-25 C ... 60 C) 6.25 A 30 A () Magnetic fuse tripping Derating Connection in parallel Connection in series Max. capacitive load Current limitation Control deviation C2 60 C ... 70 C (2.5%/K) Yes, for redundancy and increased capacity Yes Unlimited Approx. 18 A < 1 % (change in load, static 10% ... 90%) < 2 % (change in load, dynamic 10% ... 90%) < 0.1 % (change in input voltage 10%) Residual ripple Peak switching voltages nominal load Maximum power dissipation idling Power loss nominal load max. General data Width Height 48 mm 130 mm < 20 mVPP < 10 mVPP (20 MHz) 4.3 W 19.3 W 24 V DC 18 V DC ... 32 V DC (Derating < 18 V: UOut - 5%/V, IOut - 2.5/V) 0 Hz Typ. 14 A (24 V DC) < 15 A (typical) > 12 ms (24 VDC) 25 A (internal (device protection)) B16 Transient surge protection Varistor
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320128
Depth Width with alternative assembly Height with alternative assembly Net weight Efficiency Insulation voltage input/output Degree of protection Protection class MTBF (IEC 61709, SN 29500) Ambient temperature (operation) Ambient temperature (storage/transport) Max. permissible relative humidity (operation) Mounting position Assembly instructions Electromagnetic compatibility Noise immunity Standard Electrical equipment of machines Standard - Safety of transformers Standard - Electrical safety Standard Electronic equipment for use in electrical power installations and their assembly into electrical power installations Standard Safety extra-low voltage Standard - Safe isolation Standard Protection against shock currents, basic requirements for protective separation in electrical equipment UL approvals
125 mm 122 mm 130 mm 51 mm 0.9 kg > 92.5 % 1 kV (routine test) 1.5 kV (type test) IP20 III > 500000 h -25 C ... 70 C (> 60 C derating) -40 C ... 85 C 95 % (at 25 C, no condensation) horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Conformance with EMC Directive 2004/108/EC EN 61000-6-2:2005 EN 60204 EN 61558-2-17 EN 60950-1/VDE 0805 (SELV) EN 50178/VDE 0160 (PELV)
EN 60950-1 (SELV) EN 60204 (PELV) DIN VDE 0100-410 DIN VDE 0106-1010 DIN VDE 0106-101
Connection data, input Connection method Conductor cross section solid min. Pluggable screw connection 0.2 mm
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320128
Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Screw thread Connection data, output Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Signaling Output name Output description Status display Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Tightening torque, min Tightening torque max Screw thread Output name
DC OK active UOUT > 21.5 V: High signal "DC OK" LED green 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 0.5 Nm 0.6 Nm M3 POWER BOOST, active UIN OK, active
UIN > 19.2 V: High signal 20 mA (short-circuit resistant) LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320128
Certificates / Approvals
Certification
Accessories Item General 2938196 2320089 2938235 QUINT-PS-ADAPTERS7/1 UTA 107/30 UWA 182/52 Assembly adapter for QUINT-PS... power supply on S7-300 rail Universal DIN rail adapter Universal wall adapter Designation Description
QUINT-PS/24DC/12DC/ 8
Order No.: 2320115
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320115
QUINT DC/DC converter, with SFB technology, primary-switched, input: 24 V DC, output: 12 V DC/8 A
H052 1 pcs. 85044082 Page 609 (IF-2011) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads.
Technical data Input data Nominal input voltage DC input voltage range DC frequency range Current consumption 24 V DC 18 V DC ... 32 V DC (Derating < 18 V: UOut - 5%/V, IOut - 2.5/V) 0 Hz Typ. 6 A (24 V DC)
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320115
Inrush surge current Power failure bypass Input fuse Permissible backup fuse Type of protection Protective circuit/component Output data Nominal output voltage Setting range of the output voltage Output current
< 15 A (typical) > 10 ms (24 VDC) 15 A (internal (device protection)) B10 B16 Transient surge protection Varistor
12 V DC 1% 5 V DC ... 18 V DC (> 12 V constant capacity) 8 A (-25 C ... 60 C) 10 A (with POWER BOOST, -25C ... 40C permanently, UOUT = 24 V DC) 48 A (SFB technology, 12 ms)
Magnetic fuse tripping Derating Connection in parallel Connection in series Max. capacitive load Control deviation Residual ripple Peak switching voltages nominal load Maximum power dissipation idling Power loss nominal load max. General data Width Height Depth Width with alternative assembly Height with alternative assembly Net weight Efficiency Insulation voltage input/output
C2 60 C ... 70 C (2.5%/K) Yes, for redundancy and increased capacity Yes Unlimited < 1 % (change in load, static 10% ... 90%) < 20 mVPP < 10 mVPP (20 MHz) 2W 10.5 W
32 mm 130 mm 125 mm 122 mm 130 mm 35 mm 0.7 kg > 90 % 1 kV (routine test) 1.5 kV (type test)
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320115
Degree of protection Protection class MTBF (IEC 61709, SN 29500) Ambient temperature (operation) Ambient temperature (storage/transport) Max. permissible relative humidity (operation) Mounting position Assembly instructions Electromagnetic compatibility Noise immunity Standard Electrical equipment of machines Standard - Safety of transformers Standard - Electrical safety Standard Electronic equipment for use in electrical power installations and their assembly into electrical power installations Standard Safety extra-low voltage Standard - Safe isolation Standard Protection against shock currents, basic requirements for protective separation in electrical equipment UL approvals
IP20 III > 500000 h -25 C ... 70 C (> 60 C derating) -40 C ... 85 C 95 % (at 25 C, no condensation) horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Conformance with EMC Directive 2004/108/EC EN 61000-6-2:2005 EN 60204 EN 61558-2-17 EN 60950-1/VDE 0805 (SELV) EN 50178/VDE 0160 (PELV)
EN 60950-1 (SELV) EN 60204 (PELV) DIN VDE 0100-410 DIN VDE 0106-1010 DIN VDE 0106-101
Connection data, input Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Screw thread Pluggable screw connection 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 7 mm M3
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320115
Connection data, output Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Signaling Output name Output description Status display Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Tightening torque, min Tightening torque max Screw thread Output name Status display Output name Output description Maximum inrush current Status display Certificates / Approvals DC OK active UOUT > 21.5 V: High signal "DC OK" LED green 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 0.5 Nm 0.6 Nm M3 POWER BOOST, active IOUT > IN: LED "BOOST" yellow UIN OK, active UIN > 19.2 V: High signal 20 mA (short-circuit resistant) LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on Pluggable screw connection 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 7 mm
Certification
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320115
Accessories Item General 2938196 2320089 2938235 QUINT-PS-ADAPTERS7/1 UTA 107/30 UWA 182/52 Assembly adapter for QUINT-PS... power supply on S7-300 rail Universal DIN rail adapter Universal wall adapter Designation Description
QUINT-PS/24DC/24DC/10
Order No.: 2320092
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320092
QUINT DC/DC converter, with SFB technology, primary-switched, input: 24 V DC, output: 24 V DC/10 A
H051 1 pcs. Page 608 (IF-2011) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads.
Product description The QUINT 24 V/10 A DC/DC converter converts a DC voltage of 18 V ... 32 V to an adjustable, regulated, and electrically isolated 24 V output voltage. If no regulated and stable 24 V DC voltage is available to supply a load, the DC/ DC converter ensures the adjustment of the 24 V load: from an unregulated DC voltage, an adjustable output voltage of 18 V ... 29.5 V is generated.
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320092
Technical data Input data Nominal input voltage DC input voltage range DC frequency range Current consumption Inrush surge current Power failure bypass Input fuse Permissible backup fuse Type of protection Protective circuit/component Output data Nominal output voltage Setting range of the output voltage Output current 24 V DC 1% 18 V DC ... 29.5 V DC (> 24 V constant capacity) 10 A (-25 C ... 60 C) 12.5 A (with POWER BOOST, -25C ... 40C permanently, UOUT = 24 V DC) 60 A (SFB technology, 12 ms) Magnetic fuse tripping Derating Connection in parallel Connection in series Max. capacitive load Current limitation Control deviation B6 C4 60 C ... 70 C (2.5%/K) Yes, for redundancy and increased capacity Yes Unlimited Approx. 18 A < 1 % (change in load, static 10% ... 90%) < 2 % (change in load, dynamic 10% ... 90%) < 0.1 % (change in input voltage 10%) Residual ripple Peak switching voltages nominal load Maximum power dissipation idling Power loss nominal load max. < 20 mVPP < 10 mVPP (20 MHz) 1.6 W 24 W 24 V DC 18 V DC ... 32 V DC (Derating < 18 V: UOut - 5%/V, IOut - 2.5/V) 0 Hz Typ. 14 A (24 V DC) < 15 A (typical) > 12 ms (24 VDC) 25 A (internal (device protection)) B16 Transient surge protection Varistor
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320092
General data Width Height Depth Width with alternative assembly Height with alternative assembly Net weight Efficiency Insulation voltage input/output Degree of protection Protection class MTBF (IEC 61709, SN 29500) Ambient temperature (operation) Ambient temperature (storage/transport) Max. permissible relative humidity (operation) Mounting position Assembly instructions Electromagnetic compatibility Noise immunity Standard Electrical equipment of machines Standard - Safety of transformers Standard - Electrical safety Standard Electronic equipment for use in electrical power installations and their assembly into electrical power installations Standard Safety extra-low voltage Standard - Safe isolation Standard Protection against shock currents, basic requirements for protective separation in electrical equipment UL approvals 48 mm 130 mm 125 mm 122 mm 130 mm 51 mm 0.9 kg > 92 % 1 kV (routine test) 1.5 kV (type test) IP20 III > 500000 h -25 C ... 70 C (> 60 C derating) -40 C ... 85 C 95 % (at 25 C, no condensation) horizontal DIN rail NS 35, EN 60715 Can be aligned: Horizontal 0 cm, vertical 5 cm Conformance with EMC Directive 2004/108/EC EN 61000-6-2:2005 EN 60204 EN 61558-2-17 EN 60950-1/VDE 0805 (SELV) EN 50178/VDE 0160 (PELV)
EN 60950-1 (SELV) EN 60204 (PELV) DIN VDE 0100-410 DIN VDE 0106-1010 DIN VDE 0106-101
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320092
Connection data, input Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Screw thread Connection data, output Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Signaling Output name Output description Status display Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Tightening torque, min Tightening torque max Screw thread Output name Output description DC OK active UOUT > 21.5 V: High signal "DC OK" LED green 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 0.5 Nm 0.6 Nm M3 POWER BOOST, active IOUT < IN: High signal Pluggable screw connection 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 7 mm Pluggable screw connection 0.2 mm 2.5 mm 0.2 mm 2.5 mm 24 12 7 mm M3
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320092
Status display Output name Output description Maximum inrush current Status display Certificates / Approvals
IOUT > IN: LED "BOOST" yellow UIN OK, active UIN > 19.2 V: High signal 20 mA (short-circuit resistant) LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on
Certification
Accessories Item General 2938196 2320089 2938235 QUINT-PS-ADAPTERS7/1 UTA 107/30 UWA 182/52 Assembly adapter for QUINT-PS... power supply on S7-300 rail Universal DIN rail adapter Universal wall adapter Designation Description
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2320092
Address
PHOENIX CONTACT Inc., USA 586 Fulling Mill Road Middletown, PA 17057,USA Phone (800) 888-7388 Fax (717) 944-1625 http://www.phoenixcon.com