Sunteți pe pagina 1din 31

List of Aerospace / Aeronautical colleges in India 1. Siddhartha Institute of Aeronautical Engineering and Information Technology 2.

Guru Gram Institute of Aeronautical Engineering & Technology 3. Hindustan College Of Engineering 4. Hindustan Institute of Engineering Technology 5. IIT (Indian Institute of Technology), Powai, Mumbai 400076, (Maharashtra) 6. Indian Institute of Aeronautical Engineering, Dehradun C-139, Sector-3, Near United Food Programme Building, Cariapppa Marg, Defence Colony, Dehradun-248001, Uttarakhand, (Uttarakhand) 7. Indian Institute of Technology, II PO, Chennai 600036, (Tamil Nadu) 8. Institute of Aviation Technology, 1265, Sector 6, Bahadurgarh, Haryana 124507, (Punjab) 9. Institute of Information Technology & Managements Aeronautical Engineering Training Academy, Sr. No. 37, Kondwa Budruk, Pune - 411 048, (Maharashtra) 10. Mohamed Sathak Engineernig College,Kilakarai - 623 806, Ramanathapuram Dist., Tamil Nadu, (Tamil Nadu) 11. Nehru College of Aeronautics & Applied Science, 451-D, Palakkad main road, Kuniamuthur, Coimbatore - 641 008, (Tamil Nadu) 12. Park College of Engineering and Technology, Kaniyur post, Coimbatore, (Tamil Nadu) 13. Rajasthan Vidhyapeeth (Deemed)University, (Rajasthan) 14. VSM Aerospace, Chelekere, Off Ring Road, KalyanNagar Post, Bangalore - 560 043, (Karnataka) 15. Academy Of Aerospace & Aviation, Swadesh Bhawan, 2, Press Complex, A.B.Road, Indore, (Madhya Pradesh) 16. Guru Gram Institute of Aeronautical Engineering & Technology, Royal Complex-467 , Near Old Paradi Naka, Bhandara Road ,Nagpur -440008, (Maharashtra) 17. Hindustan Electronics Academy, 61, Cambridge Road, P.B.No.806, Ulsoor, Bangalore 560008, (Karnataka) 18. IIT (Indian Institute of Technology), Kharagpur 721302, (West Bengal) 19. IIT, Kanpur 208016, (Uttar Pradesh) 20. Indian Institute of Aeronautics, Patna Airport, Patna 800014, (Bihar) 21. Institute of Aeronautical and Marine Engineering, Technical Campus, # 29, R. K. Layout, Padmanabhanagar, Bangalore-560 070, (Karnataka) 22. Madras Institute Of Technology, Anna University, Chrompet, Chennai-600044, (Tamil Nadu) 23. National Institute of Aeronautical Engineering, 1/2, Canal Road, Ballupur, Dehradun 248001, (Uttarakhand) 24. National Institute of Aeronautical Engineering, 1/2, Canal Road, Ballupur, Dehradun 248001, (Uttarakhand) 25. Punjab Engineering College, Chandigarh-160012, (Chandigarh (union territory)) 26. School of Aviation Science and Technology, Delhi Flying Club, Safdarjung Airport, New Delhi, (Delhi (union territory)) 27. VSM Aerospace, Chelekere, Off Ring Road, KalyanNagar Post, Bangalore - 560 043, (Karnataka)

Major Research Project Sl.No Topics Mathematical modeling of flow in a kerosene fuelled scramjet combustor HRVW 1 Thermo Structural Design of Wing of HRV Temperature Mapping in Rocket Motor Propellent Grain Experimental Evaluation of Aerodynamic Characterizes of HRV vehicle configuration at Low Speeds Integrated Thermo Structural Analysis Fabrication and Establishment of Experimental facilities Virtual Instrumentation of MIT Wind tunnels Name Amount Company Name DRDL, Hyderabad DRDL, Hyderabad ASL, Hyderabad

Dr.B.T.N.Sridhar 4,45,500

Dr.R.Dhanaraj

4,73,100

Dr.R.Dhanaraj

6,00,000

Dr.B.T.N.Sridhar 4,35,045

DRDL, Hyderbad

Dr.R.Dhanaraj

3,60,000

ISRO, Bangalore

Dr.A.Joseph Stanley Dr.A.Joseph Stanley

Hindustan 2,75,000/- College of Engg, Padur 9.36 AICTE

Aeronautical Engineering Projects

Analysis of the effects of a refueling system on the KC-135R for AEL Industries (now BAE Systems).

Computer aided drafting work on a twin-engine propeller all-composite experimental airplane for DreamWings. Design includes stability and control analysis for one airplane with three different engines.

Stability and control derivatives for the Cessna Citation II for Alpha Systems, a simulator company.

Preliminary design and analysis on the Kelly Space and Technology Second Generation Reusable Launch Vehicle under the NASA NRA8-27 contract.

Design and analysis for Freewing.

Weight and moment of inertia prediction of the Cessna Caravan for Kohlman Systems Research.

Design verification, aerodynamic, stability and control support for a small business jet for Safire Aircraft.

Aerodynamic model and weight/moments of inertia of the Piper Malibu Mirage for SimCom.

Design of a new series of Experimental and LSA class airplanes for TranscendX Corp.

Design and CAD work for Milner Aircar.

Two Seat, Experimental Category carbon fiber kit airplane.

Part of the control system for a two-seat, experimental category carbon fiber kit airplane.

Mechanical and interior systems layout for a two seat kit airplane

Construction of prototype airplanes for TranscendX Corp.

Carbon fiber wings for 2-Seat Experimental Category airplane under construction

A wing plug being milled to make a mold for a two place experimental airplane.

Complete loads analysis and control system design of a two-seat all composite ultralight/experimental airplane for DreamWings, LLC.

Water tunnel tests on a modified KC-135R for AEL Industries (now BAE Systems).

Load testing of the carbon fiber wing of a two-seat experimental category kit airplane.

Impact Resistance Testing and evaluation of various composite panel skin materials.

First flight of a new LSA category composite airplane, the Nexaer LS-1, on October 16, 2006. DARcorporation was involved with design and development.

First flight of Experimental category, two seat, carbon fiber airplane for

DreamWings, LLC.

Landing, first flight of Experimental, two-place carbon fiber kit airplane designed, built and tested under guidance of DARcorporation. Design & Modification
y

Verification of a new design of a 6 passenger propeller airplane. Analysis included vertical tail sizing and wing sizing.

Investigation of forward maneuver area air-delivery systems for the US Navy, US Marine Corps. Creation of a simulation program for air dropping payload. Preliminary design of new airplanes to be used for delivering payload in war-zones.

Design verification of several fire-fighting airplanes for Air Tractor. Preliminary design verification and performance analysis on a family of small airplanes.

Design verification of a single engine airplane for Air Tractor. Design verification and performance analysis on a family of small airplanes. Analysis of competitor airplanes and comparison with new designs. Stability and control verification, including control forces.

New design of a two person kit airplane. Preliminary design of two airplanes based on an existing kit airplane.

NASA SBIR Phase II contract: development of G.A.-CAD: General Aviation Computer Aided Design. To revitalize the General Aviation industry, NASA Langley awarded DARcorporation a contract to design a preliminary design and analysis tool for PCs including structural design and drafting capability.

Preliminary Design of a small freighter/passenger airplane for NEXUS.

New design of an all composite two person kit airplane for DreamWings. Design includes stability and control analysis for one airplane with three different engines.

Design verification of a twin engine airplane for Air Tractor. Analysis of competitor airplanes and comparison with new designs. Stability and control verification, including control forces.

Design verification and stability and control analysis on the VisionAire Vantage business jet

Complete loads analysis and control system design of a two-seat all composite ultralight/experimental airplane for DreamWings

Design studies for Air Tractor on single-, twin- and three-engine airplanes

Preliminary design of a two-seat single engine jet-trainer

Preliminary design of a family of 4-6 seat twin-engine jets

Preliminary sizing of a small business twin-engine jet for Safire

Control system design for the DeamWings Valkyrie

Preliminary design and analysis on the Kelly Space and Technology Second Generation Reusable Launch Vehicle under the NASA NRA8-27 contract.

Design verification, aerodynamic, stability and control support for a small business jet for Safire Aircraft.

Preliminary design of a supersonic business jet for OrthoAir.

Preliminary design of a 4-seat business jet

Conceptual design of a single engine 4-seat G.A. airplane

Preliminary design of a personal air vehicle capable of vertical take-off

Preliminary design of a twin engine 6-seat G.A. airplane

Firewall forward design of an ATP turboprop powered Vans RV-

6A for Rivers Aeronautical

Design verification of a UAV concept.

Preliminary design of a jet powered UAV concept

Preliminary design of a Sport Pilot class airplane for Composicraft.

Preliminary design verification of a 4-seat G.A. airplane.

Speedbrake design for a small business jet.

Preliminary design of a transonic business jet.

Preliminary design of a roadable aircraft for Aerocar.

Control system design for a VTOL UAV.

Propeller/Rotor design for Freewing Flight Technologies, Inc.

Preliminary design of the Milner AirCar.

Design evaluation of the Hensley Wolf twin propeller pusher 4-

seater.

Preliminary design of a 4-seat G.A. Airplane.

Design review for the Nexaer LS1

Preliminary design of a twin pusher G.A. airplane

Design review for D-Star Engineering

Design review for Finite Engineering

Design review for Trolltune Corporation

Design of a VTOL UAV for Freewing

Design review on a UAV

Design review for an LSA

Design of a scaled Supermarine Spitfire

Structural design of the Valkyrie composite experimental airplane

for DreamWings

The University of Kansas/NASA DC-8 Antenna Assembly Aerodynamic and Structural Design and Analysis

Samson Motorworks: Switchblade Preliminary Design Analysis

Samson Motorworks: Switchblade wing mechanism Design

Liaoning Ante Steel Structure Group Vertical Wind Tunnel Aerodynamic and Structural Design and Analysis

The University of Kansas/NASA P-3B Antenna Assembly Design, Simulation (Aerodynamic and Structural), Fabrication and Installation

Modification of the horizontal tail of a commuter aircraft for Fairchild Aircraft.

Analysis & Stability & Control


y

Analysis of stick forces, longitudinal stability and control and verification with airworthiness standards. Analysis included ground effects, flap effects and propeller slipstream effects.

Analysis of the stability and control including stick forces and gradients for a KC-135R with a fuselage mounted external refueling system.

Stability and control derivatives for the Beech Bonanza for a MDM Systems, Inc. a simulator company. All stability and control derivatives are determined for several flight conditions to create a flight simulator model.

Stability and lift analysis of a 6-seater General Aviation aircraft for Hutterer Engineering.

Stability and control derivatives for the Cessna Citation II for Alpha Systems, a simulator company. All stability and control derivatives are determined for several flight conditions to create a flight simulator model.

Air Tractor Stability and Control Analysis

Analysis of the effects of a refueling system on the KC-135R for AEL Industries (now BAE Systems).

Analysis of flow effects on the horizontal tail for a modified KC135R with a fuselage mounted external refueling system.

Analysis of flow fields under the fuselage of a Boeing 707 for locating the best position of a refueling system.

Derivation of a system of equations of motion for Precision Training Software, a simulator company. Mathematical equations are derived for a training simulator.

Weight and moment of inertia prediction of the Cessna Caravan for Kohlman Systems Research

Horizontal tail analysis for a 2-seat amphibious airplane

Loads analysis for the Snow S-22

Equations of motion for the tilt-boom concept for Freewing Flight Technologies, Inc.

UAV database development for Thomas International.

Patent support work for a VTOL concept.

Competitor analysis for a small business jet manufacturer.

Initial structural analysis for Milner AirCar

CAD & Prototype Fabrication


y

CAD drawings of the wing ribs of the WWII Mitsubishi Zero.

CAD for a roadable aircraft concept.

Samson Motorworks: Display Mockup Construction

CAD drawings for the horizontal tail of the WWII Mitsubishi Zero.

Development of techniques to interface CAD with CAM to manufacture plugs and molds for DreamWings

Computer aided drafting work on a twin-engine propeller allcomposite experimental airplane for DreamWings

Simulation model of an Air Tractor 502B for SimCom.

CFD Analysis
y

CFD analysis of a small business jet.

CFD analysis for the Milner AirCar.

CFD analysis for Milner AirCar

CFD analysis of a bird deflector system for jet engines Wind Tunnel & Water Tunnel Testing


Wind tunnel test for Safire Aircraft Company

Wind tunnel test management for Safire Aircraft

Design and wind tunnel testing of a wind measuring device.

Wind tunnel test program management for a small business jet

Aerodynamic design and wind tunnel testing of a flying toy

Wind Tunnel data analysis for a small business jet

Wind Tunnel program management for Piper Aircraft Corporation on the PiperJet

Windtunnel tests and project management for a small business jet for VisionAire Corporation

Water tunnel tests on a modified KC-135R for AEL Industries (now BAE Systems).

Water tunnel tests on a Boeing 707-320B for AEL Industries (now BAE Systems).

Water tunnel tests on a small business jet for VisionAire Corporation

Ground test development and test management for a propeller propulsion system

VTOL Propulsion ground test.

Test support for a VTOL UAV.

The DARcorporation Advantage Experience in the design, detailed analysis and building of prototypes gives DARcorporation a unique advantage over other companies, since we can go from initial design all the way through full size manufacturing. The unique tools we developed for design and analysis make DARcorporation the best choice for any new or existing aeronautical project. DARcorporation engineers can advise on what the best materials are for your design and what the best configuration is. We will work with you to design and optimize your aircraft for performance, manufacturability and cost. Proposal & Rates Please Contact Dr. Willem Anemaat for additional information or a detailed proposal. Your detailed proposal will include cost and calendar schedule and estimated manhours per task. This will be provided at no cost or obligation.

P-3B Radar Integration

Wing Installations and Bomb Bay Installations

CFD Pressure Result

CFD Turbulence Result

FEA Stress Result

FEA Deformation Result

Manufacturing at DARcorporation (Pylon)

Installation at NASA WFF

Modal Test

Load Test

First Flight NASA WFF, University of Kansas and DARcorporation cooperated on the design, simulation, fabrication and installation of P-3B radar integration: 15 MCoRDS radars as wind installations; Accumulation, Snow, and Ku-band radars as bomb bay installations. DARcorporation engineers actively participated in this project by doing CAD design, aerodynamic trade studies, static and dynamic structural trade studies and fabrication. DARcorporation engineers analyzed 21 aerodynamic trade study cases and 12 static and dynamic structural trade study cases. Computational Fluid Dynamics (CFD) cases were analyzed to check flow characteristics in the vicinity of the installation. A series of performance studies were also conducted to see the implications of the installation on drag and hence range and endurance. Turbulence and icing conditions are also inspected. Finite element models of the fairings were developed and various extreme

load cases were simulated. The attached structure experiences extreme sizing conditions dictated by the extreme Greenland weather. The attached structure is sized to not only survive the extreme load conditions by itself, but also to not introduce unacceptable additional loads to the P3B structure. Structural stability, dynamic modes and fatigue are also inspected to ensure safe flights. DARcorporation engineers were also involved in the fabrication and installation of the composite/metal fairings. DARcorporation personnel constructed the 10 metal pylons that hold the radar installation, constructed the forward bomb bay internal structure and helped with installation at Wallops. The installations successfully passed limit static load test and dynamic modal test, showing no structural failure and unfavorable resonances. The P-3B antenna assembly was test flown successfully on April 28, 2010. NASA Blog: Operation Ice Bridge DC-8 MCoRDS Antenna Assembly

Isometric Front View of Attached Structure.

Front View.

Isometric Back View.

Back View with Cargo Door Open.

FEMAP: Stress Plot.

CFD: Pressure Contours. (Front View)

CFD: Pressure Contours and Velocity Streaklines. (Isometric View I)

CFD: Pressure Contours and Velocity Streaklines. (Isometric View II) A team of University of Kansas CReSIS researchers and DARcorporation engineers, under the guidance of Dr. Richard Hale & Dr. Chris Allen, developed a five-element ground penetrating antenna array for the MCoRDS (Multichannel Coherent Radar Depth Sounder) installation on the DC-8 in support of NASAs Operation ICE Bridge to use a radarmounted DC-8 jet to study polar ice sheets and the effects of climate change on those sheets. DARcorporation engineers analyzed the aerodynamic characteristics and the structural configuration. The array is suspended beneath a ground plane and housed in composite fairings. The installation is designed to withstand the extreme temperatures at cruise and loiter altitudes in Antarctica. Computational Fluid Dynamics (CFD) cases were analyzed to check for supersonic flow in the vicinity of the installation. And a series of performance studies were also conducted to see the implications of the installation on drag and hence range and endurance. An aerodynamically optimized shape of the fairing was developed based on the results from the performance trade studies and the CFD studies. A finite element model of the fairing was developed and various load cases were simulated. The attached structure experiences extreme sizing conditions because of operatong conditions. The attached structure is sized to not only survive the extreme load conditions by itself, but also to not introduce unacceptable additional loads to the DC-8 fuselage. Structural stability and dynamics are also checked to ensure a safe flight. DARcorporation engineers were also involved in the fabrication of the composite fairing for the installation. The fabrication and installation were based on the results from this finite element analysis. The MCoRDS Antenna Assembly was flown successfully on the DC-8 for the first time on September 11, 2009.

CReSIS: Center for Remote Sensing of Ice Sheets

Samson Motorworks Switchblade

The Samson Motorworks Switchblade

Engineering Cut-Away Mockup of the Samson Motorworks Switchblade.

Sam Bousfield, President of Samson Motorworks, is pictured in the Switchblade Engineering Cut-Away Mockup.

Motors that Control the Opening and Closing of the Wing Mechanism.

Electronics Box to Control the Motors for the Wing Mechanism

Cutaway Mockup under Construction at DARworks.

Loading up the Truck for Oshkosh 2009. DARcorporation is proud to be a part of The Samson Motorworks Switchblade project! The Switchblade is a 3-wheeled car, part motorcycle, and part plane and will allow you to fly out from a local airport, land at your destination, then drive to the front door! Mr. Sam Brousfield, CEO and President of Samson Motorworks, Inc. is planning a release date in late 2011. Auburn Journal Article, by Andrew DiLuccia Excerpt from Samson Motorworks News Letter: .....Samson motors recently made a very tough decision regarding future development on the Samson Switchblade. A review was done at the end of the last engineering cycle in February, where it was apparent that a three-surface aircraft design may be the winning ticket. It was a hard decision, as Swift has a very good reputation. In the end, however, it was difficult to turn away from the engineers at Design Analysis Research Corp (DAR Corp) with their hard-won commercial experience working on the Piaggio Avanti, also a three-surface design. They also have engineers with vehicle design experience on staff, which fills out the experience needed to pull off this kind of design. The decision was made and we are now moving ahead rapidly, working with Willem Anemaat, PHD, of the DAR Corp in Lawrence, Kansas. Samson CEO and Founder, Sam Bousfield, and Anemaat have been collaborating on finalizing the design for the Samson Switchblade Multi Mode Vehicle. ..... Download Samson Motorworks Newletters (pdf):
y y y y y

December 11, 2009 October 24, 2009 September 17, 2009 AirVenture 2009 July 16, 2009

July 2, 2009

AirVenture 2009! DARcorporation engineers had just three weeks to design, build and deliver this engineering cut-away mockup of the Samson Motorworks Switchblade to Oshkosh Wisconsin for Air Venture 2009! The Switchblade mockup included a fully functional wing folding mechanism operated by electrical motors and controllers that determined the speed and direction of the folding wings. A working instrument panel controlled the wings and locking mechanisms. Sam Bousfield, President of Samson Motorworks, reported great success at Oshkosh and announced first flight this time next year, with kit deliveries o Projects and skills required: 1. Wind tunnel drag study of landing gear - aerodynamics 2. Wind tunnel study of aircraft stall - aerodynamics 3. Aircraft range calculation - aerodynamics 4. Aircraft tail design - aerodynamics and stability & control 5. Engine muffler design - aerodynamics and aeroacoustics 6. Automobile drag study - aerodynamics 7. Engine vibration and noise - physics and acoustics 8. Wind tunnel wall correction - aerodynamics 9. Wind tunnel fan design - aerodynamics 10. Wind tunnel energy usage - aerodynamics Some of the projects undertaken by IIT Madras over the last few years include the followingAerodynamic Load Estimation of a Helicopter Rotor in Hover and Climb and Development of a Computer Code which was sponsored by IDF. Study of Flow through Axi symmetric / 2-D Variable area C D Nozzles sponsored by ADA. A Distributed Problem Solver for Navier Stokes Equations sponsored by IRDF. Analysis of Flow Through Air Augmented Rockets and of an air breathing hypersonic flying test bed sponsored by ISRO. Some other unique ideas on which aeronautical projects were done include space aviation, structure of a new Boeing, history and technology

of a Concorde etc. For many years there has been a constant search for a newer, stronger and more durable material than carbon fiber and duralumin.

Propulsion Electromagnetic propulsion, pulsed power, plasma physics, magnetoin fusion for propulsion and terrestrial power applications Dr. Jason Cassibry Propulsion, verification and validation of models, experimentation and uncertainty analysis Dr. Hugh W. Coleman Solid, liquid and hybrid propulsion, combustion instability, missile de multi-disciplinary design Dr. Robert Frederick Computational Fluid Dynamics (CFD) Computational and experimental methods in thermal/fluid science and biomedical engineering with emphasis on simulation validation and vi prototyping Dr. Dawn Bardot Magnetohydrodynamics (MHD), Smoothed Particle Hydrodynamics (SPH), and high temperature equations of state, with applications to collisional plasmas and high temperature gas dynamics Dr. Jason Cassibry Turbulence, combustion, acoustics, radiative heat transfer, multiphase relativistic astrophysical flows - Dr. T. J. Chung Applied computational fluid dynamics, numerical analysis, chemically reacting flows, acoustics, fluid-structure-acoustic interactions, superso and hypersonic laminar, transitional and turbulent flows Dr. Kader Frendi Multiphase flows, turbulence, computational fluid dynamics, stochasti probabilistic modeling of thermo-fluid flows, propulsion and high

performance computing Dr. Babak Shotorban Magneto-hydro-dynamics (MHD), Gasdynamics and Radiative Gasdynamics, Plasmadynamics, Solar phenomena, Numerical simulation methods for fluids, heat transfer, and plasma Dr. S. T. Wu Aerospace Structures Mechanical behavior of materials, fatigue crack growth, fracture mechanics, high temperature materials, corrosion and oxidation behavior, reliability and component life prediction Dr. Jeffrey Evans Experimental stress analysis, applied optics, solid mechanics, fiber optic sensing, holographic interferometry, speckle metrology, panoramic imaging, strategically turned absolutely resilient structures - Dr. John Gilbert Mechanics and manufacturing science of composites, computer-aided rehabilitation, the durability of composites and polymers Dr. Vistasp Karbhari Smart materials systems, development of smart actuators and sensors, health monitoring of composite material systems and large civil infrastructures, experimental characterization and micro-mechanics modeling of material Dr. Mark Lin Rotorcraft, adaptive structures, structural dynamics, vibration and shock control, structural health monitoring Dr. Gang Wang Design of apparatus for use in microgravity environment, heat transfer, rocketry and energy conservation Dr. Francis Wessling Computational solid and structural mechanics, advanced constitutive models for materials, modeling ductile and brittle failure modeling of materials (metals, ceramics, explosives, solid propellants), impact and penetration mechanics Dr. Q.H. Ken Zuo Aerospace Systems Aircraft and missile aerodynamics, aerospace vehicle design, computational fluid dynamics, viscous fluid mechanics, and propulsion Dr. D. Brian Landrum Space systems engineering, space policy, energy systems Dr. Michael

Griffin Emerging technologies to rotorcraft, fixed wing, and space vehicles, test and evaluation of prototype aerospace systems Dr. Gang Wang

Dynamics Modeling dynamic behavior and developing unique control mechanisms for mechanical and aeronautical devices and optimization of control methods with application to micro air vehicles and unmanned air vehicles Dr. Nathan Slegers Photovoltaic system design, solar energy systems, computer-aided engineering and design (CAE and CAD) Dr. Donald Wallace

1.Higher Harmonic Control and Flight Control System Interaction 2. Design and Analysis of a Multi-Section Variable Camber Wing
3. Stability and Control Modeling of Tiltrotor Aircraft 4. Laser feedback control for robotics in aircraft assembly

5. Aircraft Parametric 3D Modelling and Panel Code of Analysis for Conceptual


Design 6. Simulating combustion flow in a rocket chamber

S-ar putea să vă placă și