Sunteți pe pagina 1din 4

OPW Fuel Management Systems 6900 Santa Fe Drive Hodgkins, IL 60525 708-485-4200 | www.opwfms.

com

Journal Printer Setup Instructions


Overview
This document lists serial port and other settings for the Citizen GSX-190i printer (below and page 2) and the Epson LX-300+ printer (page 3), for using them with the following OPW Fuel Management Systems products.
System 2 Site Sentinel Model II Site Sentinel Model III K800 K2500 FSC3000

This document does not explain how to change settings see Epsons or Citizens user documentation for those procedures. The last page of this guide has OPW Fuel Management Systems part numbers for replacement ribbons.

Citizen Serial Port DIP Switch Settings


CITIZEN PRINTERS ONLY. Your printer has Citizens serial port option, (see the appendix in your GSX-190i Users Manual). Set the 8-position internal DIP SWITCH 3 (under the cover, near the DB-25 serial port) as follows:
Psoition on GSX190i DIP SW3
1 (Baud rate) 2 (Baud rate) 3 (Baud rate) 4 (Flow control) 5 (Data bits) 6 (Parity check) 7 (Parity) 8 (Reserved)

K800
OFF (2400) ON OFF ON (DTR) ON (7) ON (enabled) OFF (even) OFF

K800 for Spanish Markets


OFF ON OFF ON OFF (8) OFF (disabled) OFF OFF

All Other OPW Fuel Management Systems Products:


ON (1200) ON OFF OFF ON ON OFF OFF

M00-75-0085 Rev. 2

Journal Printer Setup Instructions

Citizen GSX-190 Printer Control Settings


Change these settings through the GSX-190i control panel. See CommandVueTM III Control Panel in the GSX-190i Users Manual for more information.
GSX-190i Menu Group INSTALL 1 GSX-190i Key
RIBBON A.S.F. EMULATION

For K800 Spanish Markets:


NORMAL OFF EPSON

All other OPW Fuel Management System Products:


NORMAL OFF EPSON

PRINT STYLE

FONT EMPHASIZED PITCH FONT LOCK

DRAFT OFF 10 CPI OFF

DRAFT OFF 10 CPI OFF

PAGE LAYOUT

LINE SPACING FORM LENGTH PAGE SKIP

6 LPI LETTER (11 inches) OFF

6 LPI LETTER (11 inches) OFF

PRINT MODE

NLQ DIR GRAPHIC DIR

UNI-DIR UNI-DIR

UNI-DIR UNI-DIR

CHARACTER

SLASH ZERO CHARACTER SET INTL CHAR SET

ON ITALICS SPAIN 1

ON ITALICS U.S.A.

INSTALL 2

TEAR OFF PAPER OUT AUTO LF COPY MODE ENVELOPE

OFF ENABLE OFF OFF OFF

OFF ENABLE OFF OFF OFF

12/1/04

Journal Printer Setup Instructions

Epson LX-300+ Printer Control Settings


Change these settings through the Epson control Panel. See Changing Default Settings in the Epson user guide.
Epson Menu Options K800: K800 FOR Spanish Markets:
11 inch OFF OFF OFF UNI-D ESC/P ON OFF SERIAL 10 seconds 2400 EVEN 8BIT OFF

All Other OPW Fuel Management System Products:


11 inch OFF OFF OFF UNI-D ESC/P ON OFF SERIAL 10 seconds 1200 EVEN 7BIT OFF

Page length for tractor Skip over perforation Auto tear Off Auto line feed Print direction Software 0 slash High-speed draft I/F mode Auto I/F wait time Baud rate Parity Data length Parallel I/F bi-directional mode Packet mode Character table International character set for Italic table Manual fee wait time Buzzer Auto CR IBM character table

11 inch OFF OFF OFF UNI-D ESC/P ON OFF SERIAL 10 seconds 2400 EVEN 7BIT OFF

OFF ITALIC ITALIC U.S.A.

OFF ITALIC ITALIC SPAIN 1

OFF ITALIC ITALIC U.S.A.

1.5 seconds OFF OFF TABLE 1

1.5 seconds OFF OFF TABLE 1

1.5 seconds OFF OFF TABLE 1

12/1/04

Epson LX-300+ Printer Control Settings

Journal Printer Setup Instructions

Ordering a New Ribbon


Order a replacement ribbon for either printer from OPW Fuel Management Systems using the following table:
PRINTER Citizen GSX-190 Epson LX-300+ Order our part number:

75-1027 75-1011

12/1/04

S-ar putea să vă placă și