Documente Academic
Documente Profesional
Documente Cultură
Edicin N1 Lugar de Edicin INACAP Capacitacin Revisin N0 Fecha de Revisin Abril 2001 Nmero de Serie MAT-0200-32-014
Pgina 0 de 38
CONTENIDOS
E
PGINA
4 5
5 6 7 8 9 10
11
11 12 14 15 16 18 19 20 21 22 24 26 27 28 30
Pgina 1 de 38
REA INFORMTICA
CAPTULO I MOUSE
CONTENIDOS
PGINA
32
32
34 36
36
Pgina 2 de 38
REA INFORMTICA
CAPTULO I / MOUSE
REA INFORMTICA
Pgina 3 de 38
AUTOCAD
MENS DESPLEGABLES
BARRAS DE HERRAMIENTAS
REA GRFICA
SISTEMA DE COORDENADAS
LNEA DE COMANDOS
BARRA DE ESTADOS
Permite crear lneas seleccionando el punto de inicio y trmino de un vector. Secuencia: Lnea de comandos: Command: Line From point: To point: To point: To point: To point: To point: Command: Ingresa el usuario: L Enter Clic (P1) Clic (P2) Clic (P3) Clic (P4) Clic (P5) Enter
P
P3
P P
Pgina 5 de 38
REA INFORMTICA
CIRCLE
Permite crear circunferencias, ingresando el radio o el dimetro. Secuencia: Lnea de comandos: Command: CIRCLE 3P/2P/TTR/<Center point>: Diameter/<Radius> <0.0000>: Command: Ingresa el usuario: C Enter P1 25 Enter
P1
SELECCIN DEL CENTRO
R 25
CRCULO CON RADIO 25
Pgina 6 de 38
REA INFORMTICA
RECTANG
Permite crear rectngulos seleccionando dos puntos diagonalmente opuestos. Secuencia: Lnea de comandos: Ingresa el usuario: Command: RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/<First corner>: Other corner: Command: REC Enter Clic (P1) @50,25(P2) Enter
P1
5 DISTANCIA
Pgina 7 de 38
REA INFORMTICA
POLYGON
Crea polgonos regulares inscritos y circunscritos, seleccionando la cantidad de lados e ingresando su centro mediante un clic. Secuencia: Lnea de comandos: Command: POLIGON Number of sides <4>: Ingresa el usuario: POL 5 Enter Edge/<Center of polygon>: Clic (P1) Inscribed in circle/Circumscribed about circle Enter (I/C) <I>: Radius of circle: 25 Enter Command:
P1
R 25
PENTGONO INSCRITO DE RADIO 25
Pgina 8 de 38
REA INFORMTICA
MTEXT
Permite ingresar texto en los dibujos. Secuencia: Lnea de comandos: Command: Ingresa el usuario: MT Enter MTEXT Current text style: STANDARD. Text 2.5 height: Enter Specify first corner: Clic (P1) Specify opposite corner or Clic (P2) [Height/Justify/Rotation/Style/Width]: Command:
P2
SELECCIN DE PUNTOS
P1
INGRESO DEL TEXTO Y SELECCIONAR OK
Pgina 9 de 38
REA INFORMTICA
ARC
Permite crear arcos. Secuencia: Lnea de comandos: Command: Center/<Start point>: Center/End/<Second point>: End point:: Command: Ingresa el usuario: ARC Enter Clic (P1) Clic (P2) Clic (P3)
P2
P1
P3
ARCO TERMINADO
Pgina 10 de 38
REA INFORMTICA
Pgina 11 de 38
REA INFORMTICA
P1
P1
SELECCIN DE VARIOS OBJETOS
P2
OFFSET
Permite crear circuitos concntricos, lneas paralelas y curvas paralelas, de acuerdo a un valor que ingrese el usuario. Secuencia: Lnea de comandos: Command: OFFSET Offset distance or Through <Through>: Select object to offset: Side to offset? Select object to offset: Ingresa el usuario: O Enter 5 Enter Clic (P1) Clic (P2) Enter
Pgina 12 de 38
REA INFORMTICA
Command:
P2
LADO DONDE SER LA COPIA
Pgina 13 de 38
REA INFORMTICA
P1
TRIM
Secuencia: Lnea de comandos: Command: TRIM Select cutting edges: Select objects: 1 found Select objects <Select object to trim>/Project/Edge/Undo: : <Select object to trim>/Project/Edge/Undo: Command: Ingresa el usuario: TR Enter (Projmode = UCS, Edgemode = No extend) Clic (P1) Enter Clic (P2) Enter
P1
SELECCIONA LMITE
ELIMINA
P2
RESULTADO
Pgina 14 de 38
REA INFORMTICA
Este comando permite cortar entidades grficas, de acuerdo a lmites definidos por objetos existentes.
COPY
Secuencia: Lnea de comandos: Command: COPY Select objects: 1 found Select objects: <Base point or displacement>/Multiple: Second point of displacement: Command: Ingresa el usuario: CP Enter Clic (P1) Enter Clic (P2) Clic (P3)
SELECCIN DE OBJETO
P P
PUNTO DE COPIA
RESULTADO
Pgina 15 de 38
REA INFORMTICA
Copia objetos de acuerdo a un punto de referencia seleccionado. Puede efectuar una o varias copias.
EXTEND
Secuencia: Lnea de comandos: Command: EXTEND Select boundary edges: Select objects: 1 found Select objects: <Select object to extend>/Project/Edge/Undo: <Select object to extend>/Project/Edge/Undo: Ingresa el usuario: EX Enter (Projmode = UCS, Edgemode = No extend) Clic (P1) Enter Clic (P2) Enter
Pgina 16 de 38
REA INFORMTICA
Command:
SELECCIONA LMITE
P1
P2
EXTIENDE
RESULTADO
Pgina 17 de 38
REA INFORMTICA
STRETCH
Permite estirar objetos seleccionados, mediante una ventana de seleccin. Secuencia: Lnea de comandos: Command: Ingresa el usuario: S Enter
STRETCH Select objects to stretch by crossing-window or Clic (P1) crossing-polygon... Select objects:Other corner: Clic (P2) 1 found Select objects: Enter Base point or displacement: Clic (P3) Second point of displacement: Clic (P4) Command:
P1
SELECCIN DE OBJETO
P2
SELECCIN PUNTO DE REFERENCIA (END)
P3
FIGURA ESTIRADA
Pgina 18 de 38
REA INFORMTICA
BREAK
Secuencia: Lnea de comandos: Command: BREAK Select object: Enter second point (or F for first point):: Command: Ingresa el usuario: BR Clic (P1) Clic (P2)
DADO OBJETO
P1
EPUNTOS DE CORTE
P2
RESULTADO
Pgina 19 de 38
REA INFORMTICA
MOVE
Permite mover objetos seleccionados desde un punto de referencia. Secuencia: Lnea de comandos: Command: MOVE Select objects: found Select objects: Base point or displacement: Second point of displacement: Command: Ingresa el usuario: M Enter Clic (P1) Enter Clic (P2) Clic (P3)
SELECCIN DE OBJETO
P1
P3
SELECCIN PUNTO REFERENCIA (CEN)
P2
PUNTO DE TRASLADO
RESULTADO
Pgina 20 de 38
REA INFORMTICA
CHAMFER
Secuencia: Lnea de comandos: Command: CHAMFER (TRIM mode) Current chamfer Dist1 = 10.0000, Dist2 = 10.0000 Polyline/Distance/Angle/Trim/Method/<Select first line>: elect second line: Command: Ingresa el usuario: CHA Enter Clic (P1) Clic (P2)
P1
SELECCIN DE LADOS
P2
Pgina 21 de 38
REA INFORMTICA
Pgina 22 de 38
REA INFORMTICA
Lnea de comandos: Command: CHAMFER (TRIM mode) Current chamfer Dist1 = 10.0000, Dist2 = 10.0000 Polyline/Distance/Angle/Trim/Method/<Select first line>: Enter first chamfer distance <10.0000>: Enter second chamfer distance <15.0000>: Command: CHAMFER (TRIM mode) Current chamfer Dist1 = 15.0000, Dist2 = 20.0000 Polyline/Distance/Angle/Trim/Method/<Select first line>: Select second line:
Ingresa el usuario: CHA Enter D Enter 15 Enter 20 Enter Enter Clic (P1) Clic (P2)
Pgina 23 de 38
REA INFORMTICA
Secuencia:
Command:
P1
SELECCIN DE LADOS
P2
Pgina 24 de 38
REA INFORMTICA
FILLET
Secuencia: Lnea de comandos: Command: FILLET (TRIM mode) Current fillet radius = 10.0 Polyline/Radius/Trim/<Select first object>: Select second object: Command: Ingresa el usuario: F Enter Clic (P1) Clic (P2)
P1
SELECCIN DE LADOS
P2
10
DISTANCIA DEL RADIO
Pgina 25 de 38
REA INFORMTICA
Lnea de comandos: Command: FILLET (TRIM mode) Current fillet radius = 10.0 Polyline/Radius/Trim/<Select first object>: Enter fillet radius <10.0>: Command: (TRIM mode) Current fillet radius = 15.0 Polyline/Radius/Trim/<Select first object>: Select second object: Command:
P1
SELECCIN DE LADOS
P2
15
DISTANCIA DEL RADIO
Pgina 26 de 38
REA INFORMTICA
Secuencia:
MIRROR
Permite copiar objetos en el lado opuesto de acuerdo a un eje de simetra seleccionando, dando forma a un objeto simtrico.
Secuencia: Lnea de comandos: Command: MIRROR Select objects: Other corner: 9 found Select objects: First point of mirror line: Second point: Delete old objects? <N> Command: Ingresa el usuario: MI Enter Clic (P1) Clic (P2) Clic (P3) Clic (P4) Enter
P1
SELECCIN DE OBJETOS
P2 P3
SELECCIN PUNTOS DE SIMETRA (END)
P4
RESULTADO
Pgina 27 de 38
REA INFORMTICA
ROTATE
Permite rotar, girar objetos de acuerdo a un punto de referencia seleccionado. Secuencia: Lnea de comandos: Command: ROTATE Select objects: 1 found Select objects: Base point: <Rotation angle>/Reference: Command: Ingresa el usuario: RO Enter Clic (P1) Enter Clic (P2) 15 Enter
SELECCIN DE OBJETO
P1
P2
15
Pgina 28 de 38
REA INFORMTICA
SCALE
Scale permite ampliar o reducir los objetos seleccionados, a partir de un punto base. Secuencia: Lnea de comandos: Command: SCALE Select objects: 1 found Select objects: Base point: <Scale factor>/Reference: Command: SELECCIN DE OBJETO Ingresa el usuario: SC Enter Clic (P1) Enter Clic (P2) 2 Enter
P1
P2
Pgina 29 de 38
REA INFORMTICA
SCALE Select objects: Found Select objects: Base point: <Scale factor>/Reference: Command:
SELECCIN DE OBJETO
P1
P2
OBJETO REDUCIDO 2 VECES SU TAMAO
Pgina 30 de 38
REA INFORMTICA
ARRAY
Permite copiar objetos, en forma polar o rectangular. Secuencia: Lnea de comandos: Command: ARRAY Select objects: 1 found Select objects: Rectangular or Polar array (<R>/P): Base/<Specify center point of array>: Number of items: Angle to fill (+=ccw, -=cw) <360>: Rotate objects as they are copied? <Y> Ingresa el usuario: AR Enter Clic (P1) Enter P Enter Clic (P2 CEN) 4 Enter Enter Enter
Pgina 31 de 38
REA INFORMTICA
Command:
P1 P2
OBJETO COPIADO
Pgina 32 de 38
REA INFORMTICA
Permite activar el letrero de dilogo osnap settings, que activa o desactiva los modos de captura. Estos modos atrapan los puntos geomtricos de las entidades grficas.
Pgina 33 de 38
Pgina 34 de 38
REA INFORMTICA
Pgina 35 de 38
REA INFORMTICA
Pgina 36 de 38
REA INFORMTICA
Pgina 37 de 38
REA INFORMTICA
Pgina 38 de 38
REA INFORMTICA
Pgina 39 de 38
REA INFORMTICA