Documente Academic
Documente Profesional
Documente Cultură
Engine
Engine Model Gross Power SAE J1995 Net Power SAE J1349 Bore Stroke Displacement Cat C175-20 2983 kW 4,000 hp 2828 kW 175 mm 220 mm 106 L 3,793 hp 6.9 in 8.7 in 6,469 in3
Operating Specifications
Nominal Payload Capacity Heaped SAE (2:1) Capacity Top Speed Loaded Steer Angle Machine Clearance Turning Diameter 363 tonnes 400 tons 240267 m3 67.6 km/h 40 Degrees 42 m 314350 yd3 42 mph 138 ft
Brakes
Number of Discs per Side Front Number of Discs per Side Rear Outside Diameter Brake Surface Standards 10 15 1067 mm 42 in 330 517 cm2 51,243 in2 J-ISO 3450 JAN88, ISO 3450-1996
Power ratings apply at 1,750 rpm when tested under the specific conditions for the specified standard. Ratings based on SAE J1995 standard air conditions of 25 C (77 F) and 99 kPa (29.32 Hg) barometer. Power based on fuel having API gravity of 35 at 16 C (69 F) and an LHV of 42 780 kJ/kg (18,390 Btu/lb) when engine is used at 30 C (38 F). No low altitude arrangement (LAA) engine derating required up to 2134 m (7,000 ft) altitude. No high altitude arrangement (HAA) engine derating required up to 4877 m (16,000 ft) altitude. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. Environmental Protection Agency emissions requirements.
Final Drives
Differential Ratio Planetary Ratio Total Reduction Ratio 1.276:1 16.67:1 21.26:1
Transmission
Forward 1 Forward 2 Forward 3 Forward 4 Forward 5 Forward 6 Forward 7 Reverse 11.3 km/h 15.2 km/h 20.5 km/h 27.7 km/h 37.2 km/h 50.3 km/h 67.6 km/h 11.9 km/h 7 mph 9.5 mph 12.7 mph 17.2 mph 23.1 mph 31.2 mph 42 mph 7.4 mph
Weights Approximate
Gross Machine Operating Weight (GMW) Body Weight Range Chassis Weight Range 623 690 kg (1,375,000 lb) 41 368-61 235 kg (91,200-135,000 lb) 210 630-219 146 kg (464,359-483,134 lb)
Suspension
Effective Cylinder 313.6 mm 12.3 in Stroke Front Effective Cylinder 165.1 mm 6.5 in Stroke Rear Rear Axle Oscillation 4.0 degrees
Refer to the Cat Mining Truck 10/10/20 Payload Policy for maximum gross machine weight limitations. Body weight varies depending on body and liner configuration. Weight range for known applications. Chassis weight with 100 percent fuel, hoist, body mounting group, rims and tires.
Body Hoists
Pump Flow High Idle Relief Valve Setting Raise Body Raise Time High Idle High Idle Body Lower Time Float 1200 L/ 317 gal/ min min 24 200 kPa 3,510 psi 25 Seconds 19 Seconds
15
Tires
Tire 59/80R63 Michelin or Bridgestone
Sound
Sound Standards The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar when properly installed and maintained and tested with doors and windows closed. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Productive capabilities of the 797F are such that, under certain job conditions, TKPH (TMPH) capabilities of standard tires could be exceeded and, therefore, limit production.
ROPS
ROPS Standards ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3741:1994 ROPS criteria. FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria.
Steering
Steering Standards SAE J15111 OCT90, ISO 5010:1992
16
Dimensions
All dimensions are approximate. Dimensions are with standard body 290-6420.
2 3 12 14 11 15 16 10
45
13
8 7 5 4 6
17
18 19 20
1 Height to Top of ROPS Empty 2 Overall Body Length 3 Inside Body Length 4 Overall Length 5 Wheelbase 6 Rear Axle to Tail 7 Loaded Ground Clearance 8 Dump Clearance 9 Loading Height Empty 10 Inside Body Depth Maximum 11 Overall Height Body Raised 12 Centerline Front Tire Width 13 Engine Guard Clearance Loaded 14 Outside Body Width 15 Overall Canopy Width 16 Inside Body Width 17 Front Canopy Height Empty 18 Rear Axle Clearance Loaded 19 Centerline Rear Dual Tire Width 20 Overall Tire Width
6526 mm 14 802 mm 9976 mm 15 080 mm 7195 mm 3944 mm 786 mm 2017 mm 6998 mm 3363 mm 15 701 mm 6534 mm 1025 mm 9755 mm 9116 mm 8513 mm 7709 mm 947 mm 6233 mm 9529 mm
21 ft 5 in 48 ft 7 in 32 ft 9 in 49 ft 6 in 23 ft 7 in 12 ft 11 in 2 ft 7 in 6 ft 7 in 23 ft 0 in 11 ft 0 in 51 ft 6 in 21 ft 5 in 3 ft 4 in 32 ft 0 in 29 ft 11 in 27 ft 11 in 25 ft 4 in 3 ft 1 in 20 ft 5 in 31 ft 3 in 17