Documente Academic
Documente Profesional
Documente Cultură
INFORMATION BROCHURE
Sponsored by
Admission coordinated by
Principal Coordinator QIP, Quality Improvement Programme Centre Indian Institute of Technology Roorkee ROORKEE 247 667 (Uttarakhand)
DATES OF REMEMBER
Access to on-line submission of applications Closing of on-line application access Last date for receipt of duly forwarded application along with enclosures 12th Oct. 2010 09th Nov. 2010 16th Nov. 2010
Providing opportunities to teachers of the degree-level engineering institutions to improve their qualifications by offering
admissions to Master and Ph.D degree programmes.
Organizing Short Term Courses at the QIP Centres for serving teachers. Curriculum Development Cell activities which help to improve the class room teaching and learning.
Eight major QIP centres at IITs and IISc undertake the various activities listed above. Admission to Master and Ph.D. programmes are also offered in selected areas in institutions recognized as Minor QIP centres. A large number of teachers from engineering institutions from all over the country have pursued Master and Ph.D degree programmes under this scheme. These are aimed at improving the standard and quality of technical education through improvement of the qualifications of the faculty members of the various engineering institutions. A Curriculum Development Cell has been set up at major QIP Centres for improving the effectiveness of technical education in the country. Its activities include curriculum development and revision or preparation of monographs, textbooks, teachers manuals, teaching aids and other resource materials, examination reforms, organizing inter-institutional programs, seminars, workshops and panel discussions, development of educational technology, creation of methodologies for formal and informal trainings, technical education of the handicaps, etc. A number of short term courses have also been organized by major QIP Centres for the benefit of the faculty members of Engineering Institutions across the country. www.iitb.ac.in www.iitd.ac.in www.iitg.ernet.in www.iitk.ac.in The QIP web sites (www.iisc.ernet.in www.iitkgp.ernet.in www.qip.iitm.ac.in www.iitr.ernet.in www.aicte.ernet.in) will give you necessary information about the programme as well as about the requirements and the procedure to apply for admission in Master / Ph.D. degree programmes. The details of the disciplines and specializations available at various centres are listed in the website and also available in the admission brochure to enable you to make appropriate choices. You can navigate through the links on the left hand side of the main web page for admission and can download the admission brochure. Access to the on-line submission of application opens on October 12, 2010 (Tuesday). The last date for the on-line submission of the application is November 09, 2010 (Tuesday). Please note that the last date for the receipt of the hard copy of application at the office of the Principal Coordinator QIP ,IIT Roorkee is November 16, 2010 (Tuesday). The procedure of admission under QIP involves the following steps:
Scrutiny of all applications in the office of the Principal Coordinator QIP. Short-listing by the QIP centres for interviews and dispatch of call letters to those selected for interviews. Recommendations by the QIP centres to NQCC. Final selection by the National QIP Coordination Committee (NQCC) and Offer of Admission by the Institution where the final selection has been recommended by NQCC.
The schedule of interviews at various QIP Centres is given in the above websites as well as in the brochure, so that you can plan your travel for attending the interviews at places of your choice. For further information about the QIP, the application form or any associated item, you may contact to the Principal coordinator QIP or any of the Coordinators of the QIP Centres listed in the website or brochure. For further information about a particular institution or a particular department therein, you may directly write to the Head of concerned department or the QIP Coordinator of the institution. Keep in touch with our website. Wishing you all the best, Principal Coordinator QIP, IIT Roorkee
I. GENERAL INFORMATION 1. The major QIP Centres at IITs and IISc offer admission to Master degree programmes in several disciplines. In addition, institutions recognised as the minor QIP Centres also offer admission to Master degree programmes under QIP in some specific departments. 2. The duration of the Master Degree Programme is 24 months. 3. Candidate should visit the website http://www.iitr.ernet.in for submitting on-line application, updated information related to: receipt of completed application, candidates called for interview, selected list of candidates and all other information pertaining to QIP admission. 4. Candidate should read the Brochure thoroughly before i) filling in the on-line application and ii) sending the final print-out of application (duly forwarded by the Head of Institution). 5. Candidates have to first submit their application form on-line through http://www.iitr.ernet.in/qip_admissions_10. Applications without on-line submission will not be considered. Candidate should make sure that proper Institute / Discipline codes are entered, all relevant details are duly filled in the respective fields. Access to on-line submission of application opens on October 12, 2010 (Tuesday). Last date for on-line submission of application is November 09, 2010 (Tuesday). 6. After filling the application on-line, candidates should send the relevant number of prints of the on-line completed form, duly forwarded by the Principal/Head of the Institution, as instructed along with all enclosures and a DD for Rs.500/- (Rs.250/- for SC/ST/PD) drawn in favour of IIT Roorkee QIP, payable at Roorkee, to The Principal Coordinator QIP, Quality Improvement Programme Centre, IIT Roorkee, Roorkee 247 667 (Uttarakhand). 7. The candidate and the Principal/Head of the Institution forwarding the application should ensure that the application is to be send to the Principal Coordinator QIP so as to reach on or before November 16, 2010 (Tuesday). Applications received after this date will not be considered. On receipt of the application, acknowledgement will be sent by email. 8. Information given by the candidate in all application print-outs should be same. In case of any difference observed in the data relating to experience, marks, designation, addresses, age etc., his/her candidature is liable to be cancelled at any stage even after the selection/ admission. 9. Conditional recommendation by the Principal/Head of the Institution will not be accepted. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or without the required enclosures will automatically be rejected. 10. The application number allotted during on-line registration should be quoted in all correspondences, and such correspondences should be routed through the Principal/Head of the candidates parent institution. The application number may be changed in some unavoidable circumstances and will be intimated through email in such cases. 11. Short-listed candidates will receive Interview Call/Admission letter from the respective QIP Coordinator of the Institute, where they have applied to seek admission. The Principal Coordinator QIP will not send any Call letter to the candidates directly. 12. Interview schedule is final and cannot be altered/changed under any circumstances. Candidate has to appear for interview at the Institute(s), where he/she would like to seek admission. Candidates may plan their travel accordingly. 13. Concessions, relaxation, and reservations Disabled/Female candidates are as per rules. for candidates belonging to SC/ST/OBC/Physically
II. INSTITUTIONS OFFERING MASTER DEGREE PROGRAMMES UNDER QIP AND THEIR CODES
S No. Name of the Institute/University Code Institutions having Major QIP Centres: The following institutions having QIP Centres which offer admission to Master degree (2-years) Programmes in several disciplines existing in those institutions. 1. BG Indian Institute of Science, Bangalore 560012 2. 3. 4. 5. 6. 7. 8. Indian Institute of Technology Bombay, Mumbai 400076 Indian Institute of Technology Delhi, New Delhi 110016 Indian Institute of Technology Guwahati, Guwahati 781039 Indian Institute of Technology Kanpur, Kanpur 208016 Indian Institute of Technology Kharagpur, Kharagpur 721302 Indian Institute of Technology Madras, Chennai 600036 Indian Institute of Technology Roorkee, Roorkee 247667 BM DL GW KN KH MD RR
Other Institutions having Minor QIP Centres: The following recognized institutions also offer admission to Master Degree (2 years) Programmes under QIP in some specific departments as given below: 9. AU Anna University, College of Engineering Campus, Chennai 600025 (i) Civil Engg., (ii) Electrical Engineering, (iii) Information and Communication Engineering, (iv) Mechanical Engineering Anna University, AC Technology Campus, Chennai 600025 (i) Chemical Engg. (ii) Leather Technology Anna University, Madras Institute of Technology, Chennai 600044 (i) Aerospace Engineering, (ii) Automobile Engineering, (iii)Electronics Engineering, (iv) Instrumentation Engineering (v) Production Technology 10. BE Bengal Engineering and Science University, Howrah 711103 (i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Mining Engg. 11. 12. 13. 14. B.M.S. College of Engineering, Bangalore 560 019 (i) Machine Design Indian School of Mines, Dhanbad 826 004 (i) Fuel and Mineral Engineering (ii) Mining Engineering Institute of Technology, BHU, Varanasi 221 005 (i) Metallurgical Engineering (ii) Mining Engineering Jadavpur University, Kolkata 700 032 (i) Electrical Engineering (ii) Electronics & Telecommunication Engineering (iii) Mechanical Engineering (iv) Production Engineering Malnad College of Engineering, Hassan 573 201 (i) Civil Engineering Motilal Nehru National Institute of Technology, Allahabad211004 (i) Applied Mechanics (ii) Civil Engineering (iii) Computer Science and Engineering (iv) Electrical Engineering (v) Electronics Engineering (vi) Mechanical Engineering National Institute of Industrial Engineering, Mumbai 400087 (i) Industrial Engineering National Institute of Technology, Calicut - 673 601 Offer admission to Master degree programmes in several disciplines National Institute of Technology Karnataka, Surathkal 575025 Offer admission to Master degree programmes in several disciplines National Institute of Technology, Rourkela 769008 (i) Ceramic Engineering (ii) Chemical Engineering (iii) Civil Engineering (iv) Computer Science and Engineering (v) Electrical Engineering (vi) Electronics and Communication Engineering (vii) Mechanical Engineering. National Institute of Technology, Tiruchirappalli 620025 (i) Civil Engineering (ii) Computer Science & Engineering (iii) Electrical and Electronics Engg. (iv) Mechanical Engineering (v) Metallurgical Engineering (vi) Production Engineering National Institute of Technology, Warangal - 506004 (i) Civil Engg. (ii) Electrical Engg. (iii) Electronics & Communication Engg. (iv) Mechanical Engg. PSG College of Technology, Coimbatore 641004 (i) Computer Science and Engineering (ii) Electrical and Electronics Engineering (iii) Mechanical Engineering (iv) Production Engineering (v)Textile Technology Shri G. S. Institute of Technology and Science, Indore 452003 (i) Electrical Engineering Shri Jayachamarajendra College of Engineering, Mysore - 570006 (i) Civil Engineering (ii) Electronic and Communication (iii) Instrumentation Technology (iv) Mechanical Engineering University Visveswaraya College of Engineering, Bangaluru 560056 (i) Civil Engineering Visvesvaraya National Institute of Technology, Nagpur 440011 (i) Civil Engineering (ii) Electrical Engineering BS IS VN JU
15. 16.
ML MN
NI CL SK RK
21.
TR
22. 23.
WR PS
24. 25.
GS SJ
26. 27.
UV VR
III. CODES FOR DEPARTMENTS OFFERING MASTER DEGREE PROGRAMMES AT VARIOUS INSTITUTIONS Department/Centre Aerospace Engineering Aeronautical Engineering Agriculture and Food Engineering Alternate Hydro Energy Centre Applied Mechanics Applied Mechanics Hydraulics Architecture and Planning Architecture and Regional Planning Automobile Engineering Biomedical Engineering Biotechnology Energy Studies (Centre) Polymer Science & Engineering (Centre) Chemical Engineering Ceramic Engineering Civil Engineering Computational Science (Super Computer Education & Research Centre) Computer Engineering Computer Science & Engineering Corrosion Science & Engineering Cryogenic Chemistry Earthquake Engineering Electrical & Electronics Engineering Electrical Communication Engineering Electrical Engineering Electronics and Communication Electronics & Communication Engineering Electronics and Computer Engineering Electronics & Electrical Communication Engg. Electronics & Telecommunication Engineering Electronics Design and Technology (Centre) Electronics Engineering Energy Science and Engineering Environmental Engineering and Management Environmental Science & Engineering Fuel and Mineral Engineering High Voltage Engineering Humanities Humanities and Social Sciences Hydrology Industrial and Management Engineering Industrial Engineering & Operations Research Industrial Engineering Industrial Engineering and Management Industrial Tribology and Maintenance Engg., Information and Communication Engineering Code AE AE AG AH AM AM AR AP AU BM BT EN PS CH CM CE CP CS CS CO CR CY EQ EE EC EE IL EC LC EC EC ED EC EN EM EV FM HV HU HS HY IM IO IE IM TR IC Institution(s) Offering Master Degree Programme BG, BM*, KH, KN, MD,AU AU KH* RR DL, MD, MN SK* RR KH AU BM KH DL DL AU, BG, BM, DL, GW, KH, KN, MD, RK, RR, SK*, RK AU, BE, BG*, BM*, CL*, DL*, GW*, KH*, KN*, MD*, ML, MN, RK*, RR*, SJ, SK*, TR*, UV, VR, WR* BG CL*, SK BG, BM, DL, GW, KH, KN, MD, MN, PS, RK, TR BM KH RR RR* PS*, SK,TR BG AU, BE, BG, BM*, CL*, DL, GS, JU*, KH*, KN, MD*, MN, RK, RR*, VR, WR SJ GW*, RK, SK*, WR* RR KH* JU* BG AU,CL*, MN BM KN BM IS BG SK KH RR KN BM NI KH DL AU
Department/Centre Instrumentation Instrumentation Technology Instrumentation Engineering Internet Science and Engineering Laser Technology Leather Technology Machine Design Material Science Materials and Metallurgical Engineering Mathematical and Computational Sciences Mathematics Mechanical and Industrial Engineering Mechanical Engineering Metallurgical and Materials Engineering Metallurgical and Materials Engineering Metallurgical Engineering & Materials Science Metallurgical Engineering Metallurgical Engineering and Material Engineering Materials Engineering Microelectronic System Mining Engineering Nuclear Engineering and Technology Nanotechnology Ocean Engineering Ocean Engineering and Naval Architecture Physics Physics and Meteorology Production Engineering Production Technology Ranbir and Chitra Gupta School of Infrastructure Design & Management Reliability Engineering Rubber Technology School of Information Technology Signal Processing Systems and Control Engineering Systems Science and Automation Textile Technology Water Resources Development Centre for Educational Technology
Code IN IN IE IS LS LT MD MS MT MC MA ME ME MT MM MM MT MT MT ML MI NE NT OE OE PH PM PE PT ID RE RT IT SP SC SA TX WR ET
Institution(s) Offering Master Degree Programme BG SJ AU BG KN AU BS KH, KN KN SK* DL, KH, MD RR AU, BE, BG, BM*, CL*, DL, JU*, GW*, KH*, KN, MD*, MN, PS*, RK*, SJ, SK*, TR*, WR KH, SK* MD BM* TR*, VN KH, RR BG BG BE, IS, KH, VN KN RR MD KH DL, MD , RR KH* JU*, PS*, TR* AU KH BM, KH KH KH BG BM BG DL, PS RR KH
Specializations have to be indicated while opting for the particular department. Code for the specializations are given along with the details corresponding to the particular institution (Depts. & Field of Specialisation).
IV. ELIGIBILITY CRITERIA 1. Only candidates (such as lecturers, readers, assistant professors, associate professors and professors) with a minimum of two-years teaching experience as full-time regular/permanent teachers of AICTE approved Degree level Engineering Institutions, National Institutes of Technology (NITs) and National Institutes of Technical Teachers Training and Research (NITTTRs) as on September 30, 2010 (Thursday) are eligible to apply. Admissions to Master degree programme under QIP are open only to candidates with a basic degree in Engineering or Technology or Architecture or such other qualification. 2. The candidate should satisfy the minimum eligibility criteria prescribed by the individual Department (and/or the Institution) to which admission is sought. 3. Computer Programmers, Systems Programmers, Workshop Staffs, Guest Lecturers, Visiting Lecturers, Teaching Assistants, Ad-hoc/Contract or Part-time Teachers, Technical Assistants, Research Engineers, Scientific Officers and other such categories of staff are not eligible. 4. Teachers of the Major QIP centers are not eligible. 5. Teachers of the Minor QIP centres are eligible to apply to Major QIP Centres. 6. Teachers of the minor QIP centres are permitted to apply for a field of specialization available in another minor QIP centre, which is not available in their parent department on the specific recommendations of the Departments and Institutes Head stating that a faculty in the particular specialization is required for their Institution. V. SCHOLARSHIP AND CONTINGENCY GRANT The candidates admitted for the Master degree programme under QIP will receive a sum of Rs. 4,000/-per month as living expenditure allowance and a contingency grant of Rs. 3,000/-per annum for two years. VI. CONDITIONS FOR ADMISSION 1. Admission is possible only to the Institutions and the Departments listed in the Information brochure. 2. The final admission of the candidate will be subject to the clearance and approval by the Admission Wing (Section) of the concerned institution as per its rules and regulations in force at the time of admission. 3. The candidate, if selected, should be relieved to join the programme in time for the session to which he/she is admitted. 4. The candidate joining the Master degree programme under QIP on deputation would be entitled to receive his/her salary and allowances, which must be paid by the parent institution sponsoring him/her. 5. Conditional recommendation by the Principal/Head of the Institution will not be accepted. 6. The Principal/Head of the Institution of a candidate who is selected for admission should ensure that the sponsorship certificate is produced by the candidate at the time he/she joins the course. 7. If a QIP scholar discontinues Master degree programme, the scholar has to refund the scholarship and contingency received to the AICTE through the QIP Centre, and the parent institution may seek refund of the salary and allowances paid to him for the period he/she attended the programme. VII. INSTRUCTIONS FOR COMPLETING THE ON-LINE APPLICATION General Instructions 1. The candidate should first register by clicking New Registration. An email confirming the registration will be sent by assigning an application number and a password. The application number and the password are required for subsequent operations. Hence the candidate should remember them or keep them at a safe place. 2. Candidate can start filling up the on-line application by logging in through View/Edit Application. 3. On-line application can be completed in one or more sessions by revisiting the website using the assigned application number and password. 4. The candidate should enter all required information correctly in all fields of the on-line application. 5. After filling the fields, the candidate can save the information in between by using the SAVE button. The candidate can edit data in any field till the final submission and printout is taken. The last date for on-line submission of application is November 09, 2010.
Personal Information 6. For the Designation field, the candidate should choose one of the following designation codes from the combo box. For designations not covered, the candidate should specify the exact designation under the other designation field, failing which his / her application cannot be considered. Designation Assistant Lecturer Associate Lecturer Lecturer Code 1 2 3 Designation Senior Lecturer Reader Assistant Professor Code 4 5 6 Designation Associate Professor Professor Other Designation Code 7 8 9
7. After completing the Name, Designation, Department and Address fields (using the pull-down menu) enter Date of Birth; Gender as Male or Female; the category by General, SC, ST, or OBC; put Yes if you belong to Physically Disabled Category and No if you do not; Married as Yes if you are married and No if you are single. Educational Qualifications and Academic Data 8. During the process of entering the application details, additional sub-links are provided in appropriate places. For example, while entering the overall performance of the candidate under Educational Qualifications, there will be a link through which the candidate can furnish the semester wise / year wise particulars. 9. For filling Academic data and Additional qualification, if the absolute marks are awarded, then fill, e.g. 650/800 where the total marks obtained is 650 out of a total of 800. If the Grade Point Average (GPA) is awarded, fill, e.g. 6.7/10 where 6.7 is GPA obtained on a scale of 10. If the candidate has failed in any subject during any semester examination and cleared that subject in a later semester, the marks obtained in that subject should be added back to the semester in which it was supposed to have been cleared and then the total marks is to be calculated. Candidate should take the marks of all the semesters for calculating the overall percentage or CGPA (irrespective of the methodology adopted by the university/college in awarding final class/division). 10. During the entry of details like detailed semester wise / year wise information, detailed teaching experience etc., the candidate has to enter the details for which documents of proof are to be attached. Institute and Department Preferences 11. A candidate can apply to a maximum of three institutions and a maximum of two departments in each of the chosen Institutes (i.e., maximum of total six options only). 12. Select the Institution by using the pull-down-menu as per the order of your preference. Then enter the programme code desired as per preferred choices with valid code. 13. Appropriate list of valid codes can be viewed using links provided. The code contains 6 characters; the first 2 alphabets identify the Institute, the next 2 alphabets identify the department within the Institute and the last 2 digits identify the field of specialization. For example, a code RRME01 represents a particular field of specialization in the Department of Mechanical and Industrial Engineering, IIT Roorkee. Preview of Application 14. Once the complete details about the candidate are entered and saved, the on-line application can be printed. To preview the completed application, the candidate can print a draft copy of the application. He should check the completeness and correctness of the information; if needed, corrections can also be made before the final submission. Final Confirmations and Printouts 15. After finalizing the contents of the application, the candidate should invoke the FINAL version of the application. Click here for printing the FINAL version of the application. Once the FINAL version option is chosen, the candidate will not be allowed to modify the contents of the application. The FINAL version should be printed only on A4 sheet with the print orientation as portrait, and margins as 20 mm (left, right, top and bottom). The print report contains multiple copies of the application. The first copy corresponds to the copy for IIT Roorkee QIP and one copy each for the preference code related to the number of institutions and departments, a candidate proposes to apply to.
16. The following Table indicates the number of printouts to be taken and the number of sets of enclosures required as related to the number of institutions and departments a candidate proposes to apply.
No. of Institutions chosen Total No. of Departments (streams or specialisations) chosen No. of applications to be printed and No. of sets of enclosures required
1 1 2 2 2 3 3 3 3
1 2 2 3 4 3 4 5 6
2 3 3 4 5 4 5 6 7
17. In each copy, the candidate should affix his/her recent stamp-size photograph in the space provided. 18. The candidate should thoroughly verify the contents of the printed documents and sign at the appropriate places. 19. In the Forwarding Note of the Application Form, the space provided for the Name of the Candidate and Teaching Experience must be duly filled in and signed by the Principal / Head of the Institution along with the Office Seal. 20. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or without the required enclosures will automatically be deemed invalid. VIII. APPLICATION FEE A demand draft for Rs 500/-for General/OBC Category and Rs. 250/-for SC/ST/PD candidates, drawn in favour of IIT Roorkee QIP payable at Roorkee should be attached with the form marked as, Copy for Principal Coordinator on top of the form. Candidate should write their application number, name, address and courses applied on back side of the DD. Candidate should note that the fee paid other than DD i.e., by IPO, cheques, etc. are not acceptable. Application fees once paid cannot be refunded. IX. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM In Forwarding Note, the candidate should check his/her Name, years and months of experience, signature (Head of Institution), date, and office seal. Photographs: Affix recent stamp size photographs at space provided on all printed copies of Application Forms including the Copy for Principal Coordinator. Signatures of the Applicant: The candidate should sign in all the printouts at relevant places. Candidate should ensure that all informations are properly filled in and required number of print-outs taken and all copies are to be send in a single envelope to the Principal Coordinator QIP, IIT Roorkee. Enclosures 1. 2. 3. 4. Application Fee: DD of Rs. 500/- for General/OBC Category and Rs. 250/- for SC/ST/PD candidates should be enclosed with the copy of the Principal Coordinator QIP form only. Candidates belonging to SC, ST or OBC category, must attach an attested copy of the caste certificate issued by a competent authority as per the Government of India rules. Physically Disabled candidates must attach a copy of the certificate issued by a competent authority as per Government of India rules. Enclose attested copies of all the relevant certificates Certificates of the Qualifying Examination and other Degrees Age proofing Certificate Mark Lists of all years/semesters of qualifying examination (mark sheets clearly showing total marks obtained out of maximum marks according to semester or year) Teaching Experience Industrial/Research Experience Certificates. Certificates of Short Term Courses attended. All Research Publications. Any other Academic Qualifications/Awards etc.
10
X. INSTRUCTIONS FOR DESPATCHING 1. For the convenience of the candidate, a check list is also printed as the last page. One can use this list and ensure the completeness of application. Once completed, the entire bunch (all copies) is to be dispatched to the Principal Coordinator QIP, IIT Roorkee along with the DD of the relevant amount. 2. Before mailing the completed forms, please ensure that each copy of application form and its enclosures are properly fastened with a tag separately at the left-hand top corner. 3. In case, your applications are submitted by your sponsor, it is your responsibility to ensure that the application is forwarded to the Office of the Principal Coordinator QIP, IIT Roorkee well within the time so as to reach on or before November 16, 2010 (Tuesday). Applications received after this date will not be considered. 4. In case, the candidate has forgotten the password, the candidate should send an email (using the email ID mentioned in the on-line application) to qip@iitr.ernet.in furnishing the following details: Application Number, Name of the Candidate, Date of Birth, Address for Correspondence, Gender and Category. After verification, the candidate will be informed the password through email only. 5. The requisite number of the print-outs of the application submitted on-line, along with the required number of enclosures, as mentioned, should be sent to The Principal Coordinator QIP, Quality Improvement Programme Centre, IIT Roorkee, Roorkee 247 667, preferably by Speed Post or Courier Service, to reach the Office on or before November 16, 2010 (Tuesday). Applications received after this date will not be considered: All the completed forms along with enclosures should be sent only to the Principal Coordinator QIP, IIT Roorkee. For any clarification contact: Phone: 01332 285241, 285247; Fax: 01332 286691, 273560; Email: qip@iitr.ernet.in. XI. LAST DATE The last date for on-line submission of application is November 09, 2010 (Tuesday). Print-outs of the online filled-in application, including the Copy for Principal Coordinator, with its enclosures, complete in all respect should reach The Principal Coordinator QIP, Quality Improvement Programme Centre, Indian Institute of Technology Roorkee, Roorkee 247 667, on or before November 16, 2010 (Tuesday). Applications received after this date will not be considered. XII. PROCEDURE FOR ADMISSIONS UNDER QIP 1. Short-listing of the candidates will be done first by the office of the Principal Coordinator, then finally at the Department/Institute concerned. Interview letters will be sent to the short-listed candidates by the Department/institute concerned. Interviews will be conducted in the Departments at the individual Institutions. Schedule of interviews is provided in the next Section. Please note that No TA/DA will be paid to candidates for attending the interviews. Selections will be made by the National QIP Coordination Committee based on the recommendations of various institutions. Final Results will be available at the website: www.iitr.ernet.in Admission letters will be issued to the selected candidates by the respective QIP centres or Academic section of the institutions offering the admission.
2.
3. 4. 5.
11
XIII. SCHEDULE OF INTERVIEWS FOR ADMISSION TO MASTER DEGREE PROGRAMMES UNDER QIP The following dates of interview at various QIP Centres, finalized by National QIP Coordination Committee, are final and cannot be altered under any circumstances. S.No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Institute National Institute of Technology, Calicut National Institute of Technology, Tiruchirappalli Malnad College of Engineering, Hassan PSG College of Technology, Coimbatore Anna University, Chennai IIT Madras National Institute of Technology, Warangal SJ College of Engineering, Mysore UVCE, Bangaluru BMS College of Engineering, Bangalore IISc Bangalore National Institute of Technology Karnataka, Surathkal Visvesvaraya National Institute of Technology, Nagpur National Institute of Industrial Engineering, Mumbai IIT Bombay SGS Institute of Technology & Science, Indore National Institute of Technology, Rourkela IIT Guwahati IIT Kharagpur Indian School of Mines, Dhanbad Jadavpur University, Kolkata Bengal Engineering and Science University, Howrah IIT Roorkee Institute of Technology, BHU, Varanasi Motilal Nehru National Institute of Technology, Allahabad IIT Kanpur IIT Delhi Interview Date 07-01-11 11-01-11 17-01-11 19-01-11 21-01-11 24-01-11 26-01-11 28-01-11 31-01-11 01-02-11 02-02-11 04-02-11 07-02-11 08-02-11 09-02-11 11-02-11 14-02-11 16-02-11 18-02-11 21-02-11 22-02-11 23-02-11 25-02-11 28-02-11 01-03-11 02-03-11 04-03-11 Day Friday Tuesday Monday Wednesday Friday Monday Wednesday Friday Monday Tuesday Wednesday Friday Monday Tuesday Wednesday Friday Monday Wednesday Friday Monday Tuesday Wednesday Friday Monday Tuesday Wednesday Friday
XIV. DEPARTMENTS AND FIELDS OF SPECIALISATION AT VARIOUS INSTITUTIONS The departments offering admission to Master degree (2 years) programmes at various institutions and the fields of specialization in the departments are listed in the Tables given below. Specializations mentioned indicate only areas of interest, and are not exhaustive. There may not be admissions open to all the areas indicated, and candidates, if found suitable, may be admitted to related areas also. The details given are subject to variation and change from time-to-time and only those operating in the respective institutions at the time of actual admissions are applicable. Candidates desirous of more information such as for accommodation, fee structure etc. may write/contact to the QIP Coordinator of the individual institution or visit their website.
12
Biochemical Engineering; Catalyst Synthesis; Complex Fluids; Environmental Engineering; Multiple flows; Molecular Simulations; Nanoparticle Engineering; Population Balance Modelling; Reaction Engineering; Rheology, Statistical Mechanics; Theoretical and Compuitational Biology, Therapeutic Engineering; Transfer Processes; Modern Instrumental Methods of Analysis; Energy Storage. Geotechnical Engineering Water Resources & Environmental Engineering Structural Engineering Transportation and infrastructure Engineering Theoretical Computer Science: Design of Algorithms, Coding theory, Cryptography, Formal Verification, Graph theory, Logic, Randomized Algorithms, Computational Geometry, Computational Topology. Systems and Software: Compilers, Computer Architecture, Computer Networks, Databases, Distributed Computing, Embedded Systems, Energy-Aware Computing, Mobile & wireless systems, Operating Systems, Real-Time OS, Storage Systems, Systems Security, Visualization, Graphics, Programming Languages. Automation: Auctions and Mechanism design, Bioinformatics, Data Mining, Electronic Commerce, Game Theory, Intelligent agents, Machine Learning, Pattern recognition, Reinforcement Learning, Stochastic Control and Optimization, Stochastic Simulation Signal Processing, Pattern Recognition, Data Mining, Neural Networks, Image Processing, Sensor Networks, Computer Vision, Medical and Document Image Analysis and Recognition, Speech Processing, Multimedia and Real Time Systems.
BE/BTech or equivalent degree in Civil Engg. or B.Sc. or equivalent degree followed by AMIE in Civil Engg. **Each of the 3 specialization conducted by Civil Engg. department would constitute a separate preference. B.E./B.Tech in any discipline BE/B.Tech or equivalent degree in Computer Science and/or Engineering (CS) or Information Technology (CS) or Information Science and Engineering (CS).
BGSA01
Systems Science and Automation (Jointly conducted by department of Electrical Engg. & Computer Science and Automation)
BGEE01
Electrical Engineering
Power Systems, High Voltage Engineering, Power Electronics Internal Combustion Engines and Technical Acoustics; Material Science, Mechanical Systems Analysis and Design; Thermal Science, Fluid Mechanics and Solid Mechanics, MEMS, Biomechanics. Physical Metallurgy, Mechanical Metallurgy, Chemical Metallurgy, Extractive Metallurgy, Materials Processing, Alloy Design, Ceramics, Composites and Modeling, Fine Particle Processing.
BE/B.Tech. or equivalent degree in Computer Science/ Engg., Electrical, Electronics, Communication, Instrumentation, Mechanical or Chemical Engg.; OR B.Sc. or equivalent degree followed by AMIE in Electrical, Electronics and Communication, Mechanical or Chemical Engg., GRAD.IETE, AMIChE, Candidates should have done a formal course in Programming in C language. BE/B.Tech. or equivalent degree in Electronics & Communication (EC), Telecommunication (EC)., Electronics (EC) or Electrical Engineering with specialization in Electronics & Communication (EC), OR B.Sc. or equivalent degree followed by GRAD. IETE (EC), AMIE in Electronics & Communication (EC) or Wireless Communication (EC). BE/B.Tech. or equivalent degree in Electrical, or Electrical and Electronics or B.Sc. or equivalent degree followed by AMIE in Electrical. BE/B.Tech or equivalent degree in Mechanical Engg. or B.Sc. equivalent degree with Mathematics followed by AMIE in Mechanical Engg., or AMIMechE(I) BE/B.Tech or equivalent degree in Metallurgy/Mechanical Engineering/Chemical Engineering/Ceramic Engineering/Technology or B.Sc. or equivalent degree with Mathematics, Physics & Chemistry followed by AMIE in Metallurgical Engg. or AMIIM.
BGME01
Mechanical Engineering
BGMT01
Materials Engineering
13
Code BGML01
Department Microelectronic System (Jointly conducted by, Electrical Communication Engg. & Centre for Electronics design & Technology) Signal Processing (Jointly conducted by Elect. Engg & Electrical Communication Engg.) Electronics Design and Technology (Centre for Electronics Design and Technology)
Fields of Specialization Semi-custom VLSI Design-FPGA, ASIC, Sub micron CMOS Device Technology; Analog and RF circuit design, MEMS.
Minimum Qualification BE/B.Tech or equivalent degree in Electrical (EE), Electronics and Communication (EC), Computer Science (CS), Instrumentation with Electronics (IN) OR B.Sc or equivalent degree followed by AMIETE (EC) or AMIE in Electrical (EE) or Electronics and Communication(EC)
BGSP01
Medical Signal, Speech, Audio and Image/video Processing, Compression, Array Processing, DSP Architectures, Pattern Recognition, Biomedical Imaging, Bio-inspired Signal Processing.
BE/B.Tech. or equivalent degree in Electrical, Electronics and Communication OR B.Sc. or equivalent degree followed by GRAD. IETE or AMIE in Electrical or Electronics and Communication.
BGED01
Communication Networks, Embedded Systems, Power Conversion, VLSI Design, Electronic Packaging, Instrumentation.
BGIN01 Instrumentation
Analytical Instrumentation, Electronic Instrumentation, Laser and Optical Instrumentation, Solar Energy and Thermal Instrumentation, Vacuum and Thin Films.
BGCP01
Multi-disciplinary program addressing, High Performance Computing, Computational issues in large scale problem solving, Simulation in Science and Engg., Numerical Techniques and Algorithms, Computational Biology.
BE/B.Tech. or equivalent degree in Electronics as one of the subjects or B.Sc. or equivalent followed by AMIE a relevant area of specialization OR M.Sc. in Physics with Electronics as the special subject. (M.Sc. degree or equivalent degree holders should possess 2 years experience in Electronic Hardware) M.Sc. or equivalent degree with specialization in Instrumentation/Electronics/equivalent or B.E./B.Tech. or equivalent degree in Instrumentation/ Instrumentation & Control Engineering or Electronics & Instrumentation/Electronics. BE/B.Tech. or equivalent degree in any discipline M.Sc. or equivalent degree in any discipline M.C.A. In all cases strong mathematical and programming background is required.
14
Aerospace Structures AE, ME, CE Research Areas: 1. Biochemical Engineering and Biotechnology Metabolic Engineering, Applied Enzymology, Bioseparations, Bioinformatics, Drug Discovery, Vermiculture, Waste Mangement, Pollution Control and Environmental Engineering, Stem cells, Food Process Engineering and Biosystems Engg. 2. Interface Engineering and Science. Colloids, Solgels, Emulsions, Foams, Nanoparticles, Microstructural Engineering, Aerosols, Characterization of mesostructured materials, Nanomaterials and Nano Technology, Polymer Adsorption, Interfacial Reaction Engineering. 3. Systems Engineering. Process Control, Process Simulation, Optimization, Computer Aided Design, Process Integration, Optimal Resource Management, Artificial Intelligence, Mathematical Modelling of large systems such as regional and global climate. 4. Materials and processing. Polymer Materials, Polymer Reaction Engineering, Polyurethanes, Rubber, Polymer Rheology, Ceramic Materials, Granular Flow and Mixing, Soft Soilds 5. Reaction Engineering and Catalysis. Petrochemicals, Process Development, Membrane Separations, Pressure Swing Adsorption, Supercritical Extraction, Reactive Distillation, Fluidization. Fuel cells, Kinetic Modelling of large systems nonlinear phenomena, Multiphase and Multifunctional Reactions, Microreactors. Transportation Systems Engineering
BMCE01 BMCE02 BMCE03 BMCE04 BMCE06 BMCS01 BMEE01 BMEE02 BMEE03 BMEE04 BMEE05 BMME01 Electrical Engineering Computer Science and Engineering Civil Engineering (code no. of the specialization to be indicated in the data sheet)
Geotechnical Engineering Water Resources Engineering Structural Engineering Remote Sensing B.E./B.Tech. in CS&E with First Class or, MCA/B.E/B.Tech in any branch with valid CS GATE score Communication Control and Computing Power Electronics and Power Systems Microelectronics Electronic Systems Thermal and fluids Engineering First class degree (with 60% minimum; 55% for SC/ST) in Mech./ Aerospace Engg./Chemical Engg. First class degree (with 60% minimum; 55% for SC/ST) in Mechanical Engg./ Aerospace Engg. Degree in B.E./B.Tech. in Electrical Engineering, Electronics, Telecommunication Engg., Instrumentation, Computer Science, computer Science & Engg., Computer Engg., Biomedical Engg., With minimum of 60% marks/1st class or equivalent
Design Engineering BMME02 Mechanical Engineering Manufacturing Engineering BMME03 Materials Science and Engineering BMMM01 Metallurgical Engineering and Materials Science
First class degree (with 60% minimum; 55% for SC/ST) in Mech./Prod./ M/c Tool/Industrial Engg. Bachelors Degree in Metallurgical ceramic, Chemical, Electrical, Electronics, Electro-chemical, Mechanical, Engineering Physics or M.Sc. in Chemistry, Physics or Materials Science or M.Sc. Applied Physics. Bachelors Degree in Metallurgical Chemical, Electrochemical, Mech. Engineering, Materials Science, Production Engg.
Process Metallurgy
BMMM02
15
Code BMBM01
Fields of Specialization Bioinstrumentation, Biomaterials & Artificial Organs, Biomedical sensors, Bionanotechnology, Computational Neuroscience, Detection & Treatment of Cancers, Drug Delivery Systems, Medical Image & Signal Processing, Mathematical Modeling, Neuromuscular Physiology, Telemedicine
Minimum Qualification (i) B.Tech/B.E in Biomedical, Chemical Computer Science, Electrical, Electronics, Telecommunications, Instrumentation, Mechanical Engineering, and Material Sciences and Engineering Physics. (ii) M.Sc. or equivalent in Biochemistry, Biophysics, Biotechnology, Ceramics, Chemistry, Electronics, Ergonomics, Materials Science, Mathematics, Molecular Biology, Physics and Physiology. (iii) M.B.B.S (iv) M.Pharm. (v) B.Pharm, BDs, BVSc degree (duration 4 years and more) Eligibility/ rank certificates are required for all such entrance examinations. All India level pre-MDS/ MVSc selection examination for BVSc, BDs & B.Pharm candidates. Written Test and Interview Prospective candidates called for the interview will be required appear in a written test in the morning of the first day of the interview. The written examination, of 1-2 hours duration, will be conducted in Mathematics (for candidates with a Medical / Pharmacy / Life Sciences background) and Biology (for candidates with a Engineering / Physical/ Chemical sciences background). The syllabi for the tests will be in accordance with the 12th standard syllabi of CBSE. B. Tech (Metallurgical Engg.) B.Tech (Materials Science) M.Sc. (Chemistry) with Maths at B.Sc. Level B.Tech. (Mechanical) Candidates with a bachelors degree in Mechanical, Electrical, Chemical, Energy Systems, Thermal Power, Automobile, Aerospace, Aeronautical, Metallurgical or Civil Engineering.
BMCO01
Corrosion Sc & Engg, Met. Engg., Chemical Engg., Mech. Engg, Chemistry, Materials Science & Engg., Mechanical Engg. Energy Efficiency/ Improvements in conventional Energy Systems: Heat pumps, Energy integration, Process integration for resource optimization, Pinch AnalysisDevelopment of techniques for optimization of Utility systems, Demand Side Management/ Load Management in the Power Sector, Variable Speed Drives, Power Generation and Systems Planning, Energy Management and Auditing, Efficient Motor Drive Systems, Electronics Ballasts, Static VAR compensators, Illumination control, Power Electronics in Energy Efficient Systems, Electric Vehicles, Boilers and Fluidised Bed Combustion, Exhaust Heat Recovery, Cogeneration, Building Energy Management, Efficient Air Conditioning Systems, Hydrogen Generation and Storage, Fuel Cells. Renewables: Biomass Gasifier Design, Development and Testing, Pyrolysis for liquid fuels and chemical, CNG Kit development, Testing of Solar Collector and systems, Passive Solar Architecture, Development of Carbon PV cell, Decentralised Power Systems-Grid Integration Issues, Hybrid Systems for Rural Electrification, Wind Energy, Low Cost Solar Drier, Fuel Cells, Thin film solar cells, Carbon nano tubes for hydrogen storage, Solar photovoltaic concentrator, Development of Engines for SVO, Biodiesel, Dual fuelling etc., Biodiesel manufacturing process. Clean coal Technologies: (UCG, Chemical Looping, Combustion) Co 2 requestrations. Nuclear: Nuclear Safety, Nuclear Waste management, Thermal Hydraulics Research, Computer Simulation Models for Analysis of Transients in Pressurised Heavy Water Reactor. Environmental Monitoring, Industrial Air & Water Pollution Control, Solid and Hazardous Waste Management, Air & Water Quality Modeling, Environmental Systems Optimization, Environmental Microbiology & Biotechnology, Indoor Air Quality, Aerosol Science and Technology, Environmental Impact Assessment and Global Issues.
BMEN01
BMEV01
Bachelor of Engineering degree in Aeronautical / Aerospace, Agricultural, Chemical, Civil, Energy, Biotechnology, Environmental, Mechanical, Metallurgical, Mining, Production, Petrochemical Engineering, or a Master of Science degree (with Mathematics at the class XII level) in Atmospheric Science, Biochemistry, Biotechnology, Chemistry, Earth Sciences, Environmental Toxicology, Environmental Sciences, Life Sciences, Meteorology, Microbiology and Physics.
16
Code BMIO01
Fields of Specialization The specific problems of research interests include: production planning, scheduling and control systems; management of inventories in production, distribution and service systems; industrial scheduling, facilities planning, project management, quality management, materials management and productivity management; operations planning and control related to CMS, MRP, ERP, flexible assembly, FMS, JIT; Supply chain analysis, reverse logistics, closed-loop supply chains and RFID applications, product variety management Operations Research applications in management of technology and resource allocation; convex optimization; mixed-integer programming; Markov decision processes; optimal control in deterministic and stochastic systems; (differential) game theory; applications of game theory; modeling and simulation of supply chains, manufacturing and service systems; theory and applications of distributed and hybrid simulations, discrete event and system dynamics simulations; applied stochastic models; scheduling and control of railways and other transport operations; time tabling of services, crew and vehicle scheduling for transport operations; optimization and design problems arising from e-commerce, including auctions and mechanism design for electronic exchanges; risk analysis and contract design; revenue management; quantitative models for financial engineering. Theory and applications of neural nets and fuzzy systems in manufacturing and management; development and applications of modern information systems for managing manufacturing, supply chain and service organizations The IEOR programme is unique in its contemporary flavour, with new courses in Financial Engineering, Supply Chain Management, Game Theory, Markov decision process, System Dynamics, Neural Networks and Fuzzy Logic, Services Management, Manufacturing systems to name a few. The programme is equally strong in background building, with updated courses in Optimization Techniques, Stochastic Models, Simulation, and Knowledgebased systems.
Minimum Qualification Candidates having a first class Bachelor's degree in any branch of Engineering with valid GATE Score in any discipline are eligible to apply.
BMSC01
Theory: Large Scale Systems, Nonlinear System Dynamics and Control, Optimization, Optimal and Robust Control, Reliable Computing with interval methods, Sliding Mode Control, System Identification. Application: Aerospace Systems, Embedded Computing and Control (DSP and FPGA based), Chemical Process Systems, Electrical Machines, Gas Turbine Systems, Mechatronics and Mechanical Systems, Nuclear Reactors, Robotics and Underactuated Systems.
Candidates having a Bachelors Degree in Aeronautical / Aerospace / Chemical / Electrical / Electronics / Instrumentation / Mechanical / Metallurgical Engineering. Candidate Should have undergone a basic course in classical control at their undergraduate level and, also be involved in teaching courses related to Systems and Control in their college.
17
DLEN01
DLPS01
Polymer Science & Technology All topics in Chemical Engineering, leading to Process Engineering and Design Construction Engineering and Management Environmental Engineering & Management
Civil Engineering (Code no. of the specialization to be indicated in the data sheet)
Rock Engineering & Underground Structures Geotechnical & Geo-environment Engineering Structural Engineering Transportation Engineering Water Resources Engineering
DLEE01
Electrical Engineering
Communication Engineering, Computer Technology, Control and Automation, Electrical Machines and Drives, Integrated Electronics and Circuits, Power Electronics Power Systems. Opto-electronics and Optical Communications (Jointly run by the Department of Electrical Engineering & Physics)
DLTR01
DLMA01
Computer Application
Design of Mechanical Equipment Industrial Engineering DLME01 Mechanical Engineering Production Engineering
Thermal Engineering 1. Solid State Material. 2. Applied Optics. 3. Optoelectronics and Optical Communications. (Jointly run with Dept. of Electrical Engineering) Textile Engineering DLTX01 Textile Technology Fiber Science and Technology
DLPH01
Physics
18
Code
Fields of specialization Petroleum Refinery Engineering Structural Engineering Water Resources Engineering and Management
Minimum Qualification Bachelor degree in Chemical Engg/ Technology with minimum CPI of 6.5 or 60% marks.
Civil Engineering
Bachelors degree in Engineering/ Technology in an appropriate area with a minimum CPI of 6.5/10 or 60% marks
GWCS01
Bachelors degree in Engineering/ Technology or equivalent in an appropriate area or M.Sc. (Computer Science/Information Technology) or MCA from a recognized Institution with a minimum CPI of 6.5/10 or 60% marks Bachelors degree in Electrical/ Electronics Engg. or Equivalent or M.Sc.(Electronics) with a minimum CPI of 6.5 / 10 or 60% marks Bachelors degree in Engineering/ Technology in an appropriate area with a minimum CPI of 6.5/10 or 60% marks
Mechanical Engineering
19
KNCH01
Chemical Engineering
KNCE01
a) For Engineering Geosciences, B.Tech./B.E. degree in Civil Engineering/ M.Sc. degree in Earth Science streams, M.Sc., degree in other science streams must have mathematics as one of the subjects at B.Sc. level.
Geo-Informatics (Code14) KNCE02 Civil Engineering (Code No. of the specialization to be indicated in the Data Sheet) KNCE03 Geotechnical Engineering (Code 08) c) For Geotechnical Engg., B.Tech./B.E. degree in Civil Engg. Structural Engineering (Code 17) KNCE04 d) For Structural Engg., B.Tech./B.E. degree in Civil Engg. and some candidates with Bachelors degree in Architecture, Building Construction and allied subjects may also be considered. e) For Transportation Engg., B.Tech./ B.E. degree in Civil/ Mechanical/Aerospace Engg. Hydraulics and Water Resources Engg. (Code 11) KNCE06 f) For Hydraulics and Water Resources Engg., B.Tech./B.E. degree in Civil/Agriculture Engg. Candidates must have taken atleast one mathematics course at UG level b) For Geoinformatics, B.Tech./B.E. in Civil/Mining/Electrical/Computer Science/ Electronics Engg./ Information Technology or M.Sc. degree in Earth Science streams/ Geography/ Physics/ Mathematics/ Environmental Sciences. Candidates with M.Sc. must have mathematics as one of the subjects at B.Sc. level
KNCS01
Theory: Complexity Theory, Complexity of Number theoretic and Algebraic Computations, Logic, Quantum Computing Algorithms: Deterministic, Parallel, and Approximation in Graphs, Computational Biology, Data Streams, Geometry, Vision, Biometrics. Artificial Intelligence: Machine Learning, Language Acquisition, Natural Language Translation, Knowledge Management. Software Technology: Software Architecture Security: Operating Sytems, Network, Infrastructure, Smart-Card, Protocol Design. Compilers: Compilers for High Performance Architecture Networks: Internet Technology, Grid Computing, Mobile Computing. Architecture: VLSI: Design including floor-planning and routing, Testing, Fault Tolerance, Embedded systems (tools and design),
20
Code
Department
Fields of specialization Power and Control (including Power Systems, Control Systems and Power Electronics & Drives), Information Systems (including Communications, Telecom Networking and Signal Processing), Microwaves & Photonics, Microelectronics VLSI and Display Tech., Soft Computing. Water Quality & Pollution, Resources Remediation, Air Quality. Pollution, Environmental Management. Operations Research, Operations Management, Organization Sciences, E-commerce and E-services, Knowledge Management, Strategic Management and Technology Management and Entrepreneurship and any area of management. Photonics, Laser Fabrication, Laser Spectroscopy, Optical communication, Non-Linear optics, Laser Plasma & applications, Optical Tomography, Bio-Medical applications of Lasers & Laser Material Processing.
Minimum Qualification
KNEE01
Electrical Engineering Environmental Engg. and Management Industrial and Management Engineering
KNEM01
KNIM01
KNLS01
Laser Technology
Degree in any branch of Engg., preferably in Electronics & Communications, Electrical Engg, or Mechanical Engg. or M.Sc. Physics. First class Bachelors Degree in Mechanical Engg. Note: Candidates with first class Degree in Production Engg. are eligible for admission only to Mechatronics or Manufacturing Science.
KNME01
Mechanical Engineering
Solid Mechanics & Design, Fluid and Thermal Sciences, Manufacturing Science, Mechatronics.
KNMT01
Modeling and Simulation of Mineral Processes Systems, Fluid Flow, Heat and Mass Transfer in Metallurgical System, Process Design and Development in Extractive Metallurgy, Simulation of Metallurgical Processes, Steel Making Injection Metallurgical Process Control and Process Optimization, Applications of Artificial Intelligence Methods in Metallurgical Processes, Electrometallurgy, Electrochemical Cleaning of Soil, Aluminum Electrolysis, Electro-deposition, Physical Metallurgy, Alloy Development, Thermodynamics and Kinetics of Phase Transformations, Heat Treatment, Solidification of Metals and Alloys, Interfacial Processes, Mechanical Processing, Thermomechanical Processing of Steels and Titanium Alloys, Processing-Structure-Property Relations in Materials, Intermetallics, Nanostructural Materials, Microstructural Characterization and Stereology, Electron Microscopy, Evolution and Characterization of Textures During processing Environmental Degradation of Materials, Materials Hydrogen Interaction, Processing of Powders and Particles Discrete Element Method (DEM), Powder Metallurgical Processing, Modeling of P/M Processes, Solid State and Liquid Phase Sintering, Structural Ceramics Composite Materials, Metal Matrix Composites, Tribology of Advanced Materials, Welding Processes, Magnetic Materials, Electromagnetic Materials and Processing, Thin Film Technology, Characterization and Applications of Opto-Electronic Materials and Devices, Materials Processing by Solid State Chemistry, Ferroelectric Ceramics, Electronic Materials, White Light Illumination, Display Materials and Technologies, Bio-materials. Electronic and Optoelectronic Materials /Devices. Advanced ceramics and composites. Nanoscale materials, Nanotubes. Superionic/Fast-ion conductors, solid electrolytes. Thin films. Magnetic materials. Organic Semiconductors. Piezoelectric and ferroelectric materials Optical spectroscopy Polymeric materials hydrogen Energy storage materials Materials synthesis
Degree in Ceramic, Chemical, Materials, Mechanical, Metallurgy or a M.Sc. degree in Chemistry, Material Science or Physics with Mathematics at the B.Sc. level.
KNMS01
B.Tech./B.E./B.Sc. (Engg.) degree in Ceramic, Chemical, Electrical, Electronics and Communication, Materials, Mechanical, or Metallurgical Engineering/Technology; or any equivalent branch of engineering/ technology or Master's degree in Physics, Applied Physics, Chemistry, Materials Science with Mathematics and Physics or Chemistry at Bachelor's level.
KNNE01
Computerized Tomography, Reactor Dynamics, Transport Theory, Thermal Fluids Analysis, Instrumentation.
21
Civil Engineering
KHCS01 KHEC01 KHEC02 KHEC03 KHEC04 KHEC05 KHEE01 KHEE02 KHEE03 KHEE04
Computer Science & Engineering. Fiber optics & Lightwave Engg Micro Electronics & VLSI Design. R F & Microwave Engg. Telecommunication System Engg. Visual Information and Embedded Systems Engg. Machine Drives and Power Electronics.
Electrical Engineering
Degree in Electrical (KHEE01-KHEE04), Electronics and Elect. Communication (KHEE02, KHEE04), Instrumentation (KHEE02, KHEE04) Engg.
KHIM01
Degree in Aerospace, Agricultural, Chemical, Civil, Computer Science, Electrical, Electronics & Elect. Communication, Energy, Industrial, Information Technology, Instrumentation, Marine, Mechanical, Manufacturing, Metallurgical, Mining, Navel Architecture, Production Engg.
Mathematics
Computer Science and Data Processing. Manufacturing Science and Engineering Thermal Science and Engineering Mechanical Systems Design
Mechanical Engineering
Degree in Mechanical (all specializations) Aerospace (KHME02, KHME03), Energy (KHME02), Metallurgical (KHME01), Production (KHME01) Engg. B.E/B.Tech. Degree in Mining Engg.Petroleum Engineering, Mineral Processing MSc Tech ( Applied Geology and Geophysics) MSc Geology and Geo-informatics Materials Engg.
KHMN01
Mining Engg.
Engineering
22
Code
Department
Fields of specialization
Minimum Qualification B.Tech/B.E Degree in Chemical Engg./Technology, Ceramic and glass Technology, Materials Technology, Plastic and/or Rubber Technology, Polymer Science and Technology/Biotechnology With 60% marks minimum M.Sc. in Physics, Solid State Physics, Chemistry, Material Science, Polymer Chemistry, Electronic Science. With 60% marks minimum Degree in Metallurgical, Chemical, or Mechanical Engg., or Production Engg., or Manufacturing Science and Engineering or in Glass and Ceramic or Materials Science/Tech. Degree in Aerospace, Civil, Marine Engg., Mechanical, Ocean Engg, Naval Architecture, Ship-building technology or equivalent. M.Sc(Physics/Applied Physics/Solid State Physics), Bachelor in Engineering Physics/Polymer engineering, M Sc, (Polymer Physics/Polymer Science), M.Sc.( Electronic Science/Materials Science/ Chemistry with Mathematics at the B.Sc. Level), M.Sc,( Applied Optics), Bachelor in Electronics Engg,/Electronics and Electrical Communication Engg. Degree in Chemical, Materials, Plastics and/or Rubber, Polymer or Textile Tech., Mechanical or Production Engg., or in Chemistry.
KHMS01
Materials Science
KHMT01
KHOE01
KHPH02
KHRT01
KHID01
Rubber Technology Ranbir and Chitra Gupta School of Infrastructure Design and Management Reliability Engineering Centre School of Information Technology
Rubber Technology
KHRE01
Reliability Engineering
Degree in Electrical Engineering, Electronics & Communication Engg, Civil Engineering, Chemical Engineering, Computer Science, Industrial Management, Mechanical Engineering, Aerospace Engineering, Production Engineering, Instrumentation Engineering Manufacturing Engineering, , Information Technology and allied branches. B.E/B.Tech. in Information Technology or Computer Sc. & Engg. or Electronics & Electrical Communication Engg. or Electrical Engg. M.C.P Degree Program
KHIT01
Information Technology
KHAR01
Degree in Architecture (B.Arch.) or Civil Engg.(B.Tech./ BE) or Bachelor of Planning (B.Planning). Students with MA/M.Sc. degree in Geography or Economics or Sociology are also eligible for admission.
23
MDAE01
Aerospace Engineering
MDAM01
Applied Mechanics
Specialization in Solid Mechanics / Fluid Mechanics/Biomedical Engineering Transport processes, Process control Biochemical Engg., Environmental Engg., Materials and High polymers Engg. Building Technology & Construction Management Environmental Engineering Geotechnical Engineering Hydraulic & Water Resources Engg. Structural Engg. Transportation Engg.
MDCH01
Chemical Engineering
MDCE01
Architecture (B.Arch.), Civil Engineering Agricultural Engineering, Biotechnology, Chemical Engineering, Civil Engineering, Environmental & Civil Engineering, M.Sc. in Life Science. Civil Engineering Agricultural Engineering, Civil Engineering, Environmental / Environmental and Civil Engineering Civil Engineering Architecture (B.Arch.), Civil Engineering B.E. / B.Tech (CS Or IT) or MCA or M.Sc (CS) (OR) B.E/B.Tech in any discipline plus at least three years teaching in CSE/ IT / MCA Departments, and current appointment in one of these Departments. Electronics & Communication Engineering Electronics & Communication Engineering, Electrical & Electronics Engineering, Instrumentation Electronics & Communication Engineering Electrical and Electronics Engineering, Electronics and Communication Engineering, Control and Instrumentation Engineering. The candidates should possess the following degree in BE / B.Tech. or equivalent in Aerospace Engineering, Chemical Engineering, Civil Engineering, Computer Science & Engineering, Electronics & Communication Engineering, Electrical & Electronics Engineering, Mechanical Engineering, Metallurgical Engineering, Naval Architecture OR M.Sc. in Mathematics OR M.Sc. in Physics
Civil Engineering
MDCS01
Communication System Power Systems & Power Electronics Micro Electronics & VLSI Design
MDEE03
MDEE04
MDMA01
Mathematics
24
Code
Department
Fields of specialization Thermal Engg. Stream: (Combustion & Propulsion, Heat Transfer & Thermal Power, I.C. Engines & Gas Turbines, Hydroturbomachines, Refrigeration & Air Conditioning, Thermal Turbomachines) Design Stream: (Mechanical Design, Composites Technology)
Minimum Qualification (The candidate should posses the following degree in B.E./B.Tech. or equivalent) Aeronautical/Aerospace Engineering, Automobile Engineering, Chemical Engineering, Energy Engineering, Mechanical Engineering, Marine Engineering, Petroleum Engineering (The candidate should posses the following degree in B.E./B.Tech. or equivalent) Aeronautical/Aerospace Mechanical Engineering Engineering, Automobile Engineering,
MDME01
MDME02
Mechanical Engineering
(The candidate should posses the following degree in B.E./B.Tech. or equivalent) Manufacturing Engg. Stream: MDME03 (Manufacturing Engineering) and Precision Aerospace Engineering, Automobile Engineering, Computer Science & Engineering, Electronics & Communication Engineering, Electrical & Electronics Engineering, Industrial Engineering, Instrumentation, Mechanical Engineering, Manufacturing Engineering, Machine Tool Engineering, Naval Architecture, Production & Industrial Engineering, Production Engineering Mechanical Engineering, Metallurgical Engineering, Production Engineering Aerospace Engineering, Civil Engineering, Marine Engineering, Mechanical Engineering, Naval Architecture Or any other appropriate engineering discipline OR M Sc in Physics, Mathematics, Statistics and Oceanography Chemical Engineering, Civil Engineering, Marine Engineering, Mechanical Engineering, Naval Architecture, Petroleum Engineering Or any other appropriate engineering discipline OR M Sc in Physics, Mathematics, Statistics Oceanography, Geology and Geophysics Electronics & Communication Engineering, Electrical & Electronics Engineering, Metallurgical Engineering. M.Sc. Materials Science (Electronics background), M.Sc. Mathematics, M.Sc. Applied Mathematics, M .Sc. Physics, M.Sc. Applied Physics.
MDMM01
Ocean Engineering
Petroleum Engineering
MDPH01
Physics
25
8.
Minimum qualification for candidates of general category seeking admission to the PG programme must have at least 60% marks or 6.00 CGPA on a 10 point scale at qualifying degree level. For SC/ST/PD category candidates this percentage is 55% or 5.50 CGPA on a 10 point scale. The percentage of marks will be considered as aggregate awarded in qualifying degree examination. Code Department Fields of specialization Minimum Qualification A recognized Bachelors Degree in Civil / Electrical/ Mechanical/ Industrial / Chemical / Electronics / Computer/ Agricultural / Environmental Engineering or its equivalent including AMIE from Institution of Engineers (India) qualification. A recognized Degree in Civil / Electrical / Mechanical / Industrial / Chemical / Agricultural / Environmental Engineering / Architecture / Planning / Biotechnology or equivalent at the Bachelors level including AMIE examinations of the Institute of Engineers. OR Master Degree in Science with Mathematics at graduation level (limited to 30% of total seats). B.Arch or its equivalent. B.Arch or its equivalent. or Bachelor Degree in Civil Engg. Bachelors Degree in Chemical / Biochemical / Pulp & Paper / Chemical Technology / Petrochemical / Polymer Technology / Petroleum Refining, or its equivalent. Bachelors Degree in Chemical / Pulp & Paper / Civil / Mechanical/ Biochemical / Petroleum / Environmental Engg. / Chemical Technology, or its equivalent. Bachelors Degree or its equivalent in any discipline of Engineering. Bachelors degree in Civil Engineering/Structural Engg./Construction Tech. or its equivalent. B.Arch. (Maximum of three candidates with Architecture degree will be admitted to this program) Bachelors degree in Civil Engg., or its equivalent. Bachelors degree in Civil Engg./Chemical Engg./Environmental Engg., or its equivalent. Bachelors degree in Civil Engg./Electronics Engg./Electrical Engg./Computer Science/Information Technology /Marine Engg./Mining Engg./Architecture, or its equivalent. Bachelors degree in Civil Engg./Mining Engg., or its equivalent (Diversification to Rock Mechanics Programm is also available. Mining Engineering Graduates with a maximum number of four will be admitted to this programm only.) Bachelors degree in Civil Engg./Mechanical Engg./Chemical Engg./Agricultural Engg., or its equivalent. Bachelors degree in Civil Engg./Structural Engg., or its equivalent. (Diversification to Bridge Engg. Programm is also available.) Bachelors degree in Civil Engg., or its equivalent B. Tech. (Chemical Engg.) / M.Sc. (Chemistry) / M.Sc. (Environment Science), or its equivalent. Bachelor's degree in Civil Engg. / Structural Engg or its equivalent. Bachelor's degree in Civil Engg. / Structural Engg / Mechanical Engg., or its equivalent Bachelors Degree in Electrical Engg. / Electronics & Communication / Instrumentation Engg., or its equivalent. Bachelor Degree in Electrical Engg. or Electronics & Communication / Instrumentation Engg., or its equivalent. Bachelor Degree in Electrical Engg. or its equivalent. Bachelors Degree in Electrical Engg. or its equivalent.
RRAH01
M.Arch. RRAR01 Architecture and Planning M.U.R.P. Computer Aided Process Plant Design. RRCH01 Chemical Engineering Industrial Pollution Abatement. Industrial Safety & Hazards Management RRCE01 RRCE02 RRCE03 Civil Engineering RRCE04 (Code no. of the specialization to be indicated in the data sheet) M.Tech Geomatics Engg. M.Tech. Building Technology M.Tech. Computer Aided Design M.Tech Environmental Engg.
RRCE05
RRCE06
M.Tech. Structural Engg. M.Tech. Transportation Engg. Advanced Chemical Analysis Soil Dynamics. Structural Dynamics Instrumentation & Signal Processing
RREE01 Electrical Engineering Systems & Control Power System Engg., Electric Drives & Power Electronics
RREE02
26
Code
Department
Fields of specialization Communication Systems RF & Microwave Engg. Microelectronics & VLSI System Modeling & Control Computer Sc. & Engineering Information Technology
Minimum Qualification Bachelors Degree in Electronics & Communication Engg. or its equivalent Bachelors degree in Electronics and Communication Engg. or its equivalent Bachelors degree in Electronics & Communication Engg. or its equivalent . Bachelors degree in Electronics & Communication Engg. / Electrical Engg. or its equivalent Bachelors degree in any branch of Engg./Tech. or M.Sc. in Electronics / Computer Science / Physics / Mathematics / Statistics or MCA. Bachelors degree in any branch of Engg./ Technology or M.Sc. in Electronics / Computer Science or MCA (i) Bachelor's degree in Civil / Mechanical / Agricultural Engg. / Hydrology or its equivalent qualification. OR M.Sc. / M.Tech (Masters) degree in Chemistry / Geology / Geophysics / Applied Geology / Applied-Geophysics / Physics / Meteorology / Geography / Atmospheric Physics / Environmental Science with Mathematics in B.Sc. (Bachelors) course as one of the subjects. OR M.Sc. (Masters) degree in Statistics with Physics or Mathematics at B.Sc. (Bachelors) level OR M.Sc. (Masters) degree in Mathematics with Physics in B.Sc. (Bachelors) level or its equivalent. OR (ii) A.M.I.E. candidate with B.Sc. or Engineering Diploma qualifications, who have complete Section A and B Examinations of the Institute of Engineers (India) and have been elected as A.M.I.E. (Civil or Mechanical) and have at least 3 year research or teaching or other professional experience in responsible capacities may also be admitted after such applicants have passed a prescribed written/oral test. OR (iii) For admission to Watershed Management option of the P.G. Diploma, candidate with M.Sc. (Masters) degree in Soil Science or Two year Diploma in Forestry after B.Sc. (Bachelors) with Physics and Mathematics in the B.Sc. (Bachelors) course are also eligible. Bachelors degree in Mechanical / Industrial Production / Aeronautical Engg./ Automobile Engg. or its equivalent. Bachelors degree in Mechanical / Industrial / Production Engg. or its equivalent. Bachelors degree in Mechanical/ Industrial Production/ Chemical/ Aeronautical/ Automobile Engg. or its equivalent. Bachelors degree in Mechanical/ Industrial/ Production / Metallurgical Engg. or its equivalent. Bachelors degree in Mechanical / Industrial / Production Engg. or its equivalent. B.Tech Degree or equivalent in Metallurgical Engineering, Materials Engineering, Ceramics Technology, Polymer Technology, Nano Science and Technology, Mechanical Engineering, Industrial / Production Engineering, Chemical Engineering OR M.Sc. degree in Chemistry, Materials Sciences, Physics are eligible for admission. B. Tech. (Met. & Mat. Engg / Mech. Engg. / E&C / Electronics / Chemical Engg. / Pulp & Paper / Biotechnology), or its equivalent; M.Sc. (Physics / Chemistry / Biotechnology), or its equivalent with Mathematics at 10 + 2 or higher level. B.Tech. Engg. Physics / M.Sc. (Physics) / Bachelors degree in Electrical / Electronics / Metallurgical Engg., or its equivalent. B. Tech / B.E. Degree in Chemical Engg. or Chemical Technology / Pulp & Paper Engg. / Mechanical Engg. / Polymer Engg. / Biotechnology / Cellulose Technology / Alcohol, food and Fermentation Technology, or its equivalent. Note : The two years post B.Sc. Diploma awarded by the IPT/DPT plus a minimum of two years relevant experience in Industry / Research organisation will be considered equivalent to B.Tech / B.E. Degree.
RRLC01
RRHY01
Hydrology
Hydrology
Machine Design Engg. Production & Industrial System Engg. RRME01 Mechanical and Industrial Engineering Thermal Systems Engg. Welding Engg. CAD,CAM & Robotics
RRMT01
RRNT01
Nanotechnology
Nanotechnology
RRPH01
Physics
RRPP01
27
Code
Department
Minimum Qualification Bachelors degree in Civil Engg. or equivalent / Agricultural Engg. or M.Sc. Agriculture in Agronomy, Soil Science, Agrometeorology, with Mathematics as one of the papers at the level of B.Sc. / B.Sc. Agriculture. Bachelors degree in Civil / Electrical / Mechanical / Electronics & Telecommunication Engg., or its equivalent.
RRWR01
AUCH01 AULT01
Degree in Engg./Tech. in the appropriate branch Degree in Engg./Tech. in the appropriate branch
College of Engineering , Guindy , Chennai-25 Environmental Engg., Structural Engg., Hydrology and Water Resources Engg., Construction Engg. and Management, Irrigation Water Management, Urban Engg., Remote Sensing, Soil Mechanics and Foundation Engg. Power Systems Engg., Control and Instrumentation, Power Electronics and Drives, High Voltage Engg., Electronics Engineering, Instrumentation Engg. Optical Communication, Medical Electronics, Applied Electronics, Communication Systems, Laser and Electro Optical Engg., Computer Science & Engg., Software Engg. Internal Combustion Engineering, Refrigeration and Air-conditioning, Energy Engineering, Engineering Design Aeronautical Engineering Automobile Engineering Avionics, Communication and Networking Instrumentation Engineering Degree in the appropriate branch in Engg. with preferably 55% or more marks in the aggregate or its equivalent in the Grade system. Degree in the appropriate branch in Engg. with preferably 55% or more marks in the aggregate or its equivalent in the Grade system Degree in the appropriate branch in Engg. with preferably 55% or more marks in the aggregate or its equivalent in the Grade system Degree in the appropriate branch in Engg. with preferably 55% or more marks in the aggregate or its equivalent in the Grade system Degree in Aeronautical, Mechanical, Mechatronics Degree in Automobile, Mechanical, Production, Manufacturing, Mechatronics Degree in ECE/EEE/E&I/CSE/IT/Electronics/ Instrumentation Degree in Instrumentation and control, Electronics and Instrumentation (E&I), Control and Instrumentation, Instrumentation Engineering Degree in Mechanical, Production, Manufacturing, Metallurgy, Industrial Automobile, Mechatronics.
AUEE01
Electrical Engineering
AUIC01
AUME01 AUAE01 AUAU01 AUEC01 AUIN01 AUPT01 Aerospace Engineering Automobile Engineering Electronics Engineering Instrumentation Engineering Production Technology
BECE01
Civil Engineering
Degree in the relevant field in Engg. Or equivalent Degree in the relevant field in Engg. Or equivalent Degree in the relevant field in Engg. Or equivalent
28
BSME01
Mechanical Engineering
Machine Design
Code ISFM01
Fields of specialization Mineral Engineering, Fuel Engineering Coal Mining, Rock Mechanics, Mine Surveying, Metalliferous Mining, Mine Planning and Design, Mine Systems Engg., Rock Excavation Engg., Mine Environmental Engg., Surface Mining, Mine and Mineral Economics, Mine Management, Surface Environment, Marine Mining, Mine Safety Engg.
ISMI01
Mining Engineering
VNMT01 VNMI01
Electrical Engineering
JUPE01
JUPE02
Production Engineering
Degree in Production/ Industrial/ Mechanical/ Manufacturing Engg. with at least 60% marks.
29
Code
Department
Minimum Qualification B.E or Equivalent degree in Aeronautical, Agricultural, Chemical, Civil, Mechanical, Marine or Naval Architecture Engineering. B.E. or Equivalent Degree in Mech., Production, Automobile, Industrial, Aeronautical, Ceramics, Metallurgy, Chemical, Electrical, Electronics. B.E or Equivalent Degree in Architectural, Agricultural, Chemical, Civil, Mech. Engg. B.E or Equivalent Degree in Architectural and Civil, Aeronautical or Mechanical Engg. B.E or Equivalent Degree in Aeronautical, Architecture, Civil or Mechanical Engg. B.E in Computer Science and Engineering or its Equivalent, B.E in Electrical, Electronics, M.C.A. or M.Sc (Computer Science) or Equivalent. B.E in any Branch of Engineering, M.C.A or M.S.C. (Computer Science) or equivalent.
MNAM01
Environmental Engg.
MNCE01
Civil Engineering
Geotechnical Engineering.
Structural Engg.
Computer Science & Engineering. MNCS01 Computer Science and Engineering Software Engineering. Electrical Engg (Control/ Instrumentations, Power Systems) MNEE01 Electrical Engg. Power Electronics and ASIC Design. MNEC01 Electronics Engg. Electronics (Digital Systems).
B.E or Equivalent in Mechanical, Automobile, Agricultural, Production, Industrial, Chemical or Aeronautical Engg. B.E or Equivalent in Mechanical, Automobile, Agricultural, Industrial, Chemical or Metallurgy Engineering B.E or Equivalent in Mechanical, Automobile, Agricultural, Production, Industrial, Chemical or Metallurgy Engg.
MNME01
Mechanical Engg.
Production Engineering.
30
NIIE01
Industrial Engineering
(*) For SC/ST Candidates 50% marks or 5.5/10 CGPA will be sufficient for all specialties
31
SKAM03
SKCH01
Environmental Engineering
SKCE04
Transportation Engineering
SKCE05
Computer Science & Engg. B.E/B.Tech. in Computer Sc. & Engg.; Information Sc.&Engg./Technology.
SKEE01
(i) B.E./ B.Tech. in Electrical Engg. or Electrical & Electronics Engg. (ii) AMIE in Electrical Engg. (i) B.E./B.Tech./B.Sc. (Eng.) in E&C., Electronics & Telecommunications/ Instrumentation Technology/ E&E/ Computer Science & Eng. (ii) AMIETE (Electronics & Telecommunication). (i) B.E./ B.Tech./ B.Sc.(Eng.) in E&C, Electronics & Telecommunications. (ii) AMIETE (Electronics & Telecommunication).
SKEC01
Electronics & Communication Engg. Communication Engineering (formerly, Digital Electronics & Advanced Communications)
SKEC02
32
Code SKHU01
Fields of specialization Master of Business Administration ( 4 Semesters) Systems Analysis and Computer Applications Master of Computer Application (6 Semesters)
Minimum Qualification i) Bachelors degree in any discipline from a recognized university. ii) Rank obtained in the CAT (Common Admission Test) B.E./B.Tech./B.Sc.(Engg.) any branch M.Sc. (Mathematics/ Statistics/ Physics)/ MCA (Master of Computer Applications) or equivalent. i) Any Bachelor degree at least three years duration with Mathematics at 10+2 level. ii) Must have valid score in NIMCET i) B.E./B.Tech./B.Sc.(Engg.) Examinations in Mechanical Engg./Automobile Engg./ Industrial and Production Engg./ Manufactur-ing Engg./ Industrial & Manufacturing Engg. ii) AMIE in Mechanical Engg. i) B.E/B.Tech./B.Sc(Engg.) in Mechanical Engg./ Industrial & Production Engg./ Industrial Engg./ and Management/ Manufacturing Engg./ Production Engg. ii) AMIE in Mechanical Engg. i) B.E./B.Tech./ AMIE in Mechanical/Electrical&Electronics/ Industrial Production /Mechatronics/Electronics& Commu-nication/ Industrial/ Instrumentation/Aeronautical/Production Eng. i) B.E./ B.Tech./ B.Sc(Eng). in Metallurgical/ Mechanical /Chemical (ii) AMIE in Metallurgical/Mechanics Eng. (by exam.) (iii) Associate Member of the Indian Institute of Metals (by exam.) A.M.I.I.M. (iv) M.Sc. Chemistry (Physical/ Analytical/ Industrial/ Applied Chemistry) (v) M.Sc. (Applied Science) (vi) M.Sc. (Materials Science) (vii) Master Degree in Mineral Beneficiation/ Mineral Processing/ Ore Dressing i) B.E./ B.Tech./ B.Sc.(Eng.) in Metallurgy/ Mechanical/ Chemical/ Industrial Production/ Polymer Technology/ Ceramic and Cement Technology/ Industrial Engg. and Manufacturing Eng., (ii) AMIE in Mechanical/Metallurgical Eng. by Exam. (iii) AMIM(by exam) of Indian Institute of metals. (iv) AMIE Ceramics of Indian Institute of Ceramics, Kolkata by exam. (v) M.Sc. in Materials Science (vi) M.Sc. Physics (Solid State)
SKMC01
SKMC02
SKME01
Thermal Engineering
SKME02
Mechanical Engg.
Manufacturing Engineering
SKME03
Mechatronics
SKMT01
Process Metallurgy
SKMT02
Materials Engineering
33
Code
Department
Fields of specialization
Minimum Qualification B.E. or B. Tech. (Ceramic/ Metallurgy/ Chemical) or M. Sc. (Physics/ Chemistry/ Material Science) with not less than 60% marks or 6.5 CGPA in the qualifying examination. B.E. or B. Tech. in Chemical/ Biochemical/ Biotechnology with not less than 60% marks or 6.5 CGPA in the qualifying examination.
RKCM01
Ceramic Engineering
Ceramic Engineering
RKCH01
Chemical Engineering
RKCE01 RKCE02 RKCE03 RKCS01 RKCS02 RKEE01 RKEC01 RKEC02 RKME01 RKME02 RKME03 Mechanical Engineering Computer Science and Engineering Electrical Engineering Electronics and Communication Engineering Civil Engineering
Soil Mechanics & Foundation Engineering. Transformation Engg. Computer Science Information Security Power Control & Drives iTelematics & Signal Processing VLSI Design & Embedded System Production Engineering Machine Design Analysis Thermal Engineering
BE, B. Tech. in Computer Science & Engineering / [Electronics / Electrical Engg. / IT or MCA or M.Sc. (Computer Science)] B.E. or B. Tech. In Electrical Engg. B.E. or B. Tech. in Electronics
Civil Engineering
Power Systems Design & Production of Thermal Power Equipment Industrial Safety Engg. Welding Engg.
Mechanical Engg.
34
PSCS01
PSEE01 PSEE02 PSEE03 PSME01 PSME02 PSME03 PSPE01 Electrical & Electronics Engg
Applied Electronics
Control Systems Power Electronics & Drives Engineering Design Industrial Engineering. Computer Integrated Manufacturing Production Engineering
Mechanical Engineering
Energy Engineering
PSTX01
Textile Technology
Textile Technology
35
SJIL01
Industrial Electronics
SJIN01
Instrumentation Technology
Bio-medical Instrumentation
SJME01
Mechanical Engineering
Maintenance Engineering
UVCE01
Civil Engineering
36
QUALITY IMPROVEMENT PROGRAMME Application for Admission to Master Degree Programme 2011-2012 Copy to the Principal Coordinator
: :
6. Contact Address
7. Phone (Office) 9. Phone (Residence) 11. Date of Birth 13. Category 15. Physically Disabled 16. UG Degree Year Class/Division
: : : : : : : : Yes/No
: :
17. Teaching Experience as on September 30, 2010 (Thursday) 18. Industrial/Research Experience as on September 30, 2010 (Thursday) 19. Number of QIP/ISTE/AICTE/IMPACT Courses Attended a) 4 to 8 days Duration: 20. Number of Research Papers: a) In Refereed journals: b) Two weeks Duration:
: :
b) In Conference Proceedings:
37
21. Institutions and Departments to which Admissions are sought Name of the Institute Choice of Specialisation First Choice Second Choice Preference 1 Preference 2 Preference 3 22. Academic Data (Examination Passed B.E/B.Tech/B.Arch/B.Sc(Engg)/Equivalent)
Semester/Year University Year Specialisation Class
Marks Obtained
Percentage
GPA
Year
Specialisation
Class
Marks Obtained
Percentage
GPA
24. Teaching Experience at Degree Level Engineering Institute as on September 30, 2010 (Thursday) S.No Name and Address of From To (Date) Years-Months Designation Employer & Institution (Date)
25. Industrial/Research Experience as on September 30, 2010 (Thursday) S.No Name of the Organisation From To (Date) Years-Months (Date)
Designation
26. Short Term Courses S.No Name of the Course & Category
Organizer
Days
From
To
27. Research Papers/Books S.No Title of Paper/Book Name of Author(s) Name of Journal/Conference Year Vol. Pages
38
Declaration a. I declare that all the information given by me in this application form is correct to the best of my knowledge and belief, and I understand that false or incomplete information would cause invalidation of the application. b. I shall abide by the decision of the National QIP Coordination Committee in all matters pertaining to admissions. The decision of the Committee shall be final and binding on me. c. I shall abide by the rules and regulations of the Institutions to which I will be offered admission, if selected.
d. For all legal actions, suits and proceedings, the jurisdiction of a court of law shall be deemed to lie exclusively at the place at which the Institution considering me for admission is situated or the place where the office of the Principal Coordinator QIP is located. e. I understand the contents of this form and, particularly, this declaration being made here.
Place: Date :
Certificate and Forwarding Note by the Principal/Head of the Institution a) Our Institution as well as the academic department, to which the applicant Mr/Ms------------------------------------------------------------------------------------------------------belongs, is approved by AICTE (Not applicable, if the candidate belongs to a National Institute of Technology (NITs) and National Institute of Technical Teachers Training & Research (NITTTR). b) The applicant is a full-time regular / permanent faculty member of our Institution and is not on deputation to any other Institution. c) The applicant has a total of ___ years and ____ months of teaching experience as on September 30, 2010 (Thursday) at the under-graduate level, as full-time, regular/permanent faculty of AICTE approved Degree level Engineering Institutions (Certificates enclosed).
d) The applicant will be relieved full-time for the programme on deputation and will be paid full salary and allowances during the tenure of his/her sponsorship, if selected for admission.
Office Seal:
Date: Note:
Conditional Recommendation will not be accepted. This Forwarding Note should be signed only by the Principal or the Head of the Institution. Any alteration made in the text of this Forwarding Note leads to automatic rejection of the application.
39