Documente Academic
Documente Profesional
Documente Cultură
Clause 1.7 Replace definition for k uo with the following: ratio, at ultimate strength, without axial force of the depth to the neutral axis from the extreme compressive fibre to do
Clause 5.4.1, Item (b)(ii) Delete is proportioned. Clause 5.4.1, Item (b)(iii) Delete first line and replace with the following: (iii) is proportioned so that Clause 5.5.2(b) Delete text of Item (i).
as 25 36 31 45 38 45 3 40 3 63 3 75
3
as 32 27 46 40 53 40 57 3 51 3 70 3
as 25 25 25 35 55 70
For prestressing tendons, the axis distance shall be increased as given in Clause 5.3.3. These combinations for columns with a minimum of 8 bars.
Table 5.6.4, Note 1 Replace 0.025 with 0.25. Equation 7.2.4(4) Replace lb = z 2 + a 2 d c with the following:
lb = z 2 + a 2 d c
AMDT No. 1 NOV 2010
Equation 8.1.3(1) Replace (within the limits 0.67 2 0.85) with the following: (within the limits of 0.67 2 0.85) Equation 8.1.3(2) Replace 2 = 1.0 0.003 f c with the following:
= 1.05 0.007 f c
Clause 8.1.5 Second paragraph, add and M* > 0.6M u after 0.36. Equation 8.4.3 Delete existing equation and replace with the following: u =
Asf f sy g p sb + b f f + k co f ct
Clause 13.1.4 Third paragraph, last line, delete 0.8 times the development length of a hooked bar of the same diameter. and replace with 0.4 Lsy.t of a bar of the same diameter. Clause 13.2.2 1 2 In the definition of k7 delete greater than and replace with at least Second paragraph, insert 29k 1d b, before k 7 Lsy.t and Lsy.t + 1.5sb ,.
Appendix A Reference AS 1012.10, replace Brasil with Brazil. Bibliography Delete reference to AS 3600 Supp1 and replace with the following: 3600 Supp1 Concrete structuresCommentary (Supplement to AS 3600)
This document has expired. To access the current document, please go to your on-line service.Please note that material accessed via our on-line subscription services is not intended for off-line storage, and such storage is contrary to the licence under which the service is supplied.