Documente Academic
Documente Profesional
Documente Cultură
A01-10-C
FEATURES
The wetted parts and the case are made of stain less steel so that they are excellent in anti-corrosion and enviromental resistance. By equipping a blowout disk, the effect of temperature change on accuracy is reduced, and breakage of glass is prevented in case the Bourdon tube bursts. To indicate the working pressure, safety mark (green mark) can be provided with an arrow mark only for 60mm and 75mm gauge as an option.
* In case of selecting pressure gauge, choose the pressure range
which can be used in between 30 ~ 65% of full scale,so that the gauge can give its full capacity. * Also should be confirmed whether the wetted parts material is suit able for the fluid or not.
SPECIFICATION
Fluid: Gas or liquid Size: 60 DIA., 75 DIA., 100 DIA., 150 DIA. Mounting: Stem Operating tempereature: 5 ~ 40g Accuracy : 1.5%F.S. Window: Organic glass The filling up liquid: Glycerine (For range, less than 0.4MPa and its compound, glycerine solution in water is used.) Case material finishing: 304 st.st. Treatment: (Option) Use no oil water (Manufactured and treated in a way that there shall be no oil or water residue at the wetting parts.) Dial scale specified: (Option) Capacity scale, Dual scale , Printed words, Colored circle Caution of operation: It is established the air circulation hole in case upper part to prevent indication error by ambient temperature change about pressure gauge / compound pressure gauge / vacuum gauge less than maximum pressure 1MPa. Do up yellow plug of relief valve up. And installation posture limit it to vertical installation.
Type A
Panel
Connection: G1/4B (PF), G3/8B (PF), G1/2B (PF), 1/2NPT, 1/4NPT, R1/4 (PT), R3/8 (PT), R1/2 (PT) * For other connections, please contact us. Wetted parts material: Bourdon tube 316 st.st. Socket 316 st.st. Pressure range: 0 ~ 0.1 h 0 ~ 200MPa -0.1 ~ 0 h -0.1 ~ 2MPa
Less than t4
116 DIA.
116 DIA.
101.6 DIA.
(22)
3 22
(h)
d (R)
f
3
d (G)
5 DIA.
(h)
d (R)
d G3/8B
h 86 86 88 88
f 18 18 20 20
(h)
d G3/8B
h 87 87 89 89
f 18 18 20 20
GV42- 33 3
GV47-1 3 3
60 DIA.
(33)
(33) (6.5) 2
(6.5) 12
70.6 DIA.
63.6 DIA.
70.6 DIA.
13
G1/4B
57
20
12
(58)
16 3
.5 +0 0 .
16
57
5 DIA.
16
G1/4B
65
R1/4
DI
16
R1/4
GV50- 33 3
(33) (6.5) 12
GV55-1 3 3
70.6 DIA.
16 (58) R1/4
A. DI
. +0 5 0
65
16 (58)
Panel cut
GV55-6 3 3
5 DIA.
75 DIA.
(7.5)
14
88.6 DIA.
88.6 DIA.
78.6 DIA.
14
70
5 DIA.
25
14
18
G3/8B 18 3
G3/8B 5 DIA.
70
R3/8 18
R3/8
17
GV51-13 3
18
GV561 33
150 DIA.
(65.5) 3-5.5 DIA. Mounting hole (P.C.D184) In case of GV42-2 3 3
171 DIA.
171 DIA.
26
(22) (60.5)
L (h)
f h
(h)
5 DIA.
55
d (G 3)
d (R 3, NPT)
d (G 3 )
f 15
5 DIA.
d (R 3 , NPT)
f 15
f h
f 18 20 20 18 20
L 14 17 17 14 17
f 18 20 20 18 20
GV44- 33 3
GV49-13 3
Throttle: (option)
For reducing pulsating pressure,throttle is put on the inlet port.
0.5 DIA.
M4
Corrosion-proof use
60
FS10-013
1.5 7
152 DIA.
(60.5)
h 30 32 32 30 32
Note: For this Model,there is no applicable item for the figures X,but please specify with X when ordering.
Size
G G V V 4 4 2 7 Stem Panel 1 2 1 Type A Type B Type D (Mounting clamp) Approx. 1 kg
Weight
Approx. 1 kg
G G
V V
4 4
4 9
Stem Panel
1 2 1 1 2
Type A Type B Type D (Mounting clamp) Type A Type B Type D (Mounting clamp)
G 60 DIA. G
Stem
Approx. 0.3 kg
Panel
1 6
Approx. 0.3 kg Type D (On line) Type A Type B Type D (Mounting clamp) Approx. 0.4 kg
G 75 DIA. G
V V
5 5
1 6
Stem Panel
1 2 1
Approx. 0.4 kg
Model
Mounting (type)
Sellection spec. 4 5 6
Additional spec.(Option) 10 8 9 11
12
13
14
15
GV
Type No. 2 Connection
GV4247 GV4449 GV5055 GV5156 2 3 4 5 6 7 8 9 G1/4B G3/8B G1/2B 1/4NPT 1/2NPT R1/4 R3/8 R1/2 o o o o o o o o o o o o o o o
9 Throttle For GV4 3 $ Complete with FS10-013 (Standard) 9 Throttle For GV5 3
0 Nil 1 FS10-013
8 Treatment
0 1 2 3 Nil Use no oil Use no water Use no oil water
7 Window
0 Standard (Organic glass)
15 Document 6 Pointer
0 Standard 0 Nil 1 Please specify your requirement Drawing one sheet,Instruction manual Inspection precedure,Mill sheet Test report
5 Accuracy
0 Standard (1.5% F.S.)
UEDA FACTORY
(JQA0794)
(JE064A)
: 1-30-4, HIGASHIMAGOME OHTA-KU, TOKYO, JAPAN. HEAD OFFICE & : +81337765328 PHONE OVERSEAS : +81337765447 SALES DEPT FAX : overseas_sales_dept @ naganokeiki.co.jp E-mail URL http : //www.naganokeiki.co.jp/ OVERSEAS PLANTS OR AFFILIATES: U.S.A., KOREA, GERMANY OVERSEAS SALES NETWORK: AUSTRALIA, HONG KONG, INDONESIA, KOREA, MALAYSIA, PHILIPPINES, SINGAPORE, TAIWAN, THAILAND, U.S.A.
100% Recycled Paper. , PRINTED IN JAPAN 03.3.1000B(N)