Sunteți pe pagina 1din 43

P4M900-M7 FE/P4M890-M7 FE Setup Manual

FCC Information and Copyright


This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation. T his equipment generates , uses , and c an radiate radio frequency energy and, if not ins talled and used in accordance with the instructions , may cause harmful interference to radio communications . There is no guarantee that interference will not occur in a particular ins tallation.

The vendor makes no representations or warranties with respec t to the contents here and s pecially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make c hanges to the c ontents here without obligation to notify any party beforehand. D uplication of this publication, in part or in whole, is not allowed without first obtaining the vendors approval in writing.

The content of this users manual is subject to be c hanged without notice and we will not be res ponsible for any mis takes found in this users manual. All the brand and produc t names are trademarks of their respec tive companies .

Table of Contents
Chapter 1: Introduction.....................................................3 1.1 Before You Start................................................................... 3 1.2 Package Checklist................................................................ 3 1.3 Motherboard Features.......................................................... 4 1.4 Rear Panel Connectors.......................................................... 5 1.5 Motherboard Layout ............................................................ 6 Chapter 2: Hardware Installation........................................7 2.1 Installing Central Processing Unit (CPU) ................................ 7 2.2 Fan Headers......................................................................... 9 2.3 Installing System Memory.....................................................10 2.4 Connectors and Slots ............................................................12 Chapter 3: Headers & Jumpers Setup................................. 14 3.1 How to Setup Jumpers..........................................................14 3.2 Detail Settings.....................................................................14 Chapter 4: RAID Functions ............................................... 20 4.1 Operation System................................................................20 4.2 Raid Arrays.........................................................................20 4.3 How RAID Works.................................................................20 Chapter 5: Useful Help ..................................................... 22 5.1 Driver Installation Note .......................................................22 5.2 Award BIOS Beep Code........................................................23 5.3 Extra Information................................................................23 5.4 Troubleshooting...................................................................24 A ppendencies: SPEC In Other Language............................. 26 German................................................................................................26 France..................................................................................................28 Italian..................................................................................................30 Spanish ................................................................................................32 Portuguese...........................................................................................34 Polish...................................................................................................36 Russian ................................................................................................38 Arabic..................................................................................................40 Japanese ..............................................................................................42

P4M900-M7 FE/P4M890-M7 FE

CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART


Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Always disconne ct the compute r from powe r outle t be fore ope ration. Before you take the mothe rboard out from anti-static bag, ground yourse lf prope rly by touching any safe ly grounde d appliance, or use grounded wrist strap to remove the static charge. Avoid touching the compone nts on mothe rboard or the rear side of the board unless ne cessary. Hold the board on the edge , do not try to be nd or flex the board. Do not leave any unfastene d small parts inside the case afte r installation. Loose parts will cause short circuits which may damage the equipment. Keep the compute r from dange rous a rea, such as hea t source , humid air and wate r .

1.2

PACKAGE CHECKLIST
HDD Cable X 1 Installation Guide X 1 Fully Se tup Drive r C D X 1 (full ve rsion manual files inside ) Rear I/O Panel for ATX Case X 1 FDD Cable X 1 (optional) Se rial ATA Cable X 1 (optional) USB 2.0 Cable X1 (optional) Se rial ATA Powe r Cable X 1 (optional)

Note: The package contents may differ by area or your motherboard version.

Motherboard Manual

1.3

MOT HERBOARD FEAT URES


P4M900-M7 FE LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / GHz LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / GHz 95W power co nsumption. Bit/ Enhanced Intel S peedStep/ Intel Extende d Memor y 64 technolo gy 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics Max Share d Vide o Memory is 256 MB ITE 8712F Provides the most commonly used legacy Super I/O functionality. Low Pin C ount Interface Enviro nment Co ntrol initiatives, H/W Monitor Fan Spee d Co ntroller ITE's "Smart Guardia n" function DIMM Slots x 2 Supports DDR2 533 / 667 DDR2 Max Memory C apicity 4GB Single Channel Mode DDR2 memory module Registered DIMM and ECC DIMM is not supported Integrated I DE Controller Ultra DMA 33~133 B us Master Mode supports PIO Mo de 0~4, Integrated Seri al ATA Controller Data transfer rates up to 1.5 Gb/s. SATA Version 1.0 specification complia nt. Realtek RTL 8201CL PH Y 10 / 100 Mb/s auto negotiation Half / Full duplex capability ALC662 5.1 cha nnels a udio o ut High- Defi nition Audio s upport P4M890-M7 FE

Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.8 CPU *It is recommende d to use processors with *It is recommende d to use processors with 95W power co nsumption. Bit/ Enhanced Intel S peedStep/ Intel Extende d Memor y 64 technolo gy FSB Chipset Graphic 533 / 800 / 1066 MHz VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Max Share d Vide o Memory is 256 MB ITE 8712F Provides the most commonly used legacy Super I/O functionality. Super I/O Low Pin C ount Interface Enviro nment Co ntrol initiatives, H/W Monitor Fan Spee d Co ntroller ITE's "Smart Guardia n" function DIMM Slots x 2 Supports DDR2 533 / 667 DDR2 Max Memory C apicity 4GB Single Channel Mode DDR2 memory module Registered DIMM and ECC DIMM is not supported Integrated I DE Controller IDE Ultra DMA 33~133 B us Master Mode supports PIO Mo de 0~4, Integrated Seri al ATA Controller SATA Data transfer rates up to 1.5 Gb/s. SATA Version 1.0 specification complia nt. Realtek RTL 8201CL PH Y LAN PHY 10 / 100 Mb/s auto negotiation Half / Full duplex capability Sound Codec ALC662 5.1 cha nnels a udio o ut High- Defi nition Audio s upport Supports Hyper Thre ading/ Ex ecute Disable Supports Hyper Thre ading/ Ex ecute Disable

Each DIMM supports 256/ 512MB/1GB/ 2GB Each DIMM supports 256/ 512MB/1GB/ 2GB Main Memory

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE PCI Expr ess x 16 slot Slots PCI Expr ess x 1 slot PCI slot Floppy connector Printer Port C onnector IDE Co nnector SATA Connector Front Pa nel Co nnector On Board Connector Front Audi o Co nnector CD-in Co nnector CPU Fan hea der System Fan hea der Clear CMOS header USB connector Power Connector ( 24pi n) Power Connector ( 4pin) PS/2 Keyboard PS/2 Mo use Back Panel I/O Serial Port VGA Port LAN port USB Port Audio J ack Board Size 190 mm (W) x 244 mm (L) Special Feature OS Support RAID 0 / 1 support Windows 2000 / XP / VISTA x1 x1 x2 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3 P4M890-M7 FE PCI Expr ess x 16 slot PCI Expr ess x 1 slot PCI slot Floppy connector Printer Port C onnector IDE Co nnector SATA Connector Front Pa nel Co nnector Front Audi o Co nnector CD-in Co nnector CPU Fan hea der System Fan hea der Clear CMOS header USB connector Power Connector ( 24pi n) Power Connector ( 4pin) PS/2 Keyboard PS/2 Mo use Serial Port VGA Port LAN port USB Port Audio J ack 190 mm (W) x 244 mm (L) RAID 0 / 1 support Windows 2000 / XP x1 x1 x2 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3

Biostar Reserves the right to add or remo ve Biostar Reserves the right to add or remove support for any OS with or witho ut notice. support for any OS with or witho ut notice.

1.4
PS/2 Mouse

REAR PANEL CONNECT ORS


LAN Li ne In/ Surround Line Out Mic In 1/ Bass/ Center

PS/2 Keyboard

COM1

VGA

USBX2

USBX2

Since the audio c hip s upports High Definiti on Audio Specific ation, the func tion of eac h audi o jack c an be defined by software. T he input / output function of each audio jac k listed above represents the default s etti ng. However, when c onnecti ng exter nal microphone to the audio port, pleas e us e the Line In (blue) and Mic In (Pink) audio j ac k. 5

Motherboard Manual

1.5
JKBMS1

MOT HERBOARD LAYOUT


JCFAN1

LGA775
CPU1
JATXPWR1

COM1 M1 JCO
JVGA1

DIMM1
JUSBV1

JPRNT1

JUSB1

JATXPWR2

IDE1

LAN
JAUDIO1 PCI-EX16

Super I/O

PCI-EX1_1

BA T1
BIO S
JU SB2

JSATA2

PCI1
JCDIN1
JUSB3

VIA VT8237A
JSATA1
JUSBV2

PCI2
Codec
JAUDIOF1

JCMO S1
FDD1
JPAN EL 1

JSFAN1

Not e: represe nts the 1st pin.


6

IDE2

JUSBLAN1

P4M900 or P4M890

DIMM2

P4M900-M7 FE/P4M890-M7 FE

CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)

Special Notice:
Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs wont be damaged.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.

Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.

P4M900-M7 FE/P4M890-M7 FE

2.2

FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.

JCFAN1: CPU Fan Heade r


Pin 1 2 3 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control

JSFAN1: System Fan He ader

Pin 1 2 3

Assignment Ground +12V FAN RPM rate sense

Note: The JSFAN1 supports 3-pin head connector and the JCFAN1 supports 4-pin head connector. When connecti ng with wires onto connectors, pl ease note that the r ed wire is the positi ve and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

Motherboard Manual

2.3

INST ALLING SYST EM MEMORY

A. Memory Modules

1.

Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

10

DIMM1 DIMM2

P4M900-M7 FE/P4M890-M7 FE 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

B. Memory Capacity
DIMM Socket Location DIMM1 DIMM2 DDR2 Module 256MB/512MB/1GB/2GB 256MB/512MB/1GB/2GB Total Memory Size Max is 4GB.

11

Motherboard Manual

2.4

CONNECT ORS AND SLOT S

FDD1: Floppy Disk Conne ctor


The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cable.

34

33

IDE1/IDE2: Hard Disk Conne ctors


The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality. It has two HDD connectors: IDE1 (primary ) and IDE2 (secondary ). The IDE connectors can connect a master and a slav e driv e, so you can connect up to four hard disk drives. The f irst hard drive should always be connected to IDE1.

40

39

IDE1

IDE2

12

P4M900-M7 FE/P4M890-M7 FE

PCI-EX16: PCI-Express x16 Slot


PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally. PCI-Express 1.0a compliant. Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth ov er the traditional PCI architecture.

PCI-EX1_1: PCI-Express x1 Slot


-

PCI-EX16

PCI-EX1_1

PCI1/PCI2: Pe riphe ral Component Inte rconne ct Slots


This motherboard is equipped with 2 standard PCI slots. PCI stands f or Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

PCI1 PCI2

13

Motherboard Manual

CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS


The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is close, if not, that means the jumper is open.

Pin opened

Pin closed

Pin1-2 closed

3.2

DET AIL SETT INGS


This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC cases front panel switch f unctions.

JPANEL1: Front Panel Heade r

PWR_LED On/Off
9 1

++ + SPK

16 8

RST HLED

Pin 1 2 3 4 5 6 7 8

Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control

Functio n Speaker Connector Hard drive LED Reset button

Pin 9 10 11 12 13 14 15 16

Assignment N/A N/A N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground

Functio n N/A N/A Power LED Power-on button

14

P4M900-M7 FE/P4M890-M7 FE

ATX Powe r Source Conne ctor: JATXPWR1


JATXPWR1 allows user to connect 24-pin power connector on the ATX power supply.
12 24

13

Pin 13 14 15 16 17 18 19 20 21 22 23 24

Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground

Pin 1 2 3 4 5 6 7 8 9 10 11 12

Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V

JATXPWR2: ATX Powe r Source Conne ctor


By connecting this connector, it will provide +12V to CPU power circuit.

1 2

4 3

Pin 1 2 3 4

Assignment +12V +12V Ground Ground

Note: Befor e power on the system, please make sure that both JA TXPWR1 and JA TXPWR2 connectors have been pl ugged-in.
15

Motherboard Manual

JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC f ront panel, and also can be connected with internal USB devices, like USB card reader.
Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC

2 1

10 9

JUSB2 JUSB3

JSATA1/JSATA2: Se rial ATA Conne ctors

The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace, it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.

JSATA2
7 1 4 4 1 7

Pin 1 2 3 4 5 6 7

Assignment Ground T X+ T XGround RXRX+ Ground

JSATA1

JAUDIO F1: Front Panel Audio Heade r

This header allows user to connect the front audio output cable with the PC f ront panel. This header allows only HD audio front panel connector; AC97 connector is not acceptable.
Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense

2 1
16

10 9

P4M900-M7 FE/P4M890-M7 FE

JCDIN1: CD-RO M Audio-in Connector


This connector allows user to connect the audio source f rom the v ariaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Pin 1 2 3 4

Assignment Left Channel Input Ground Ground Right Channel Input

JCMO S1: Cle ar CMOS Heade r


By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard.
1 3

Pin 1-2 Close: Normal Operation (default).

3
Pin 2-3 Close: Clear CMOS data.

Clear CMOS Proce dures:


1. 2. 3. 4. 5. 6. Remov e AC power line. Set the jumper to Pin 2-3 close. Wait f or f ive seconds. Set the jumper to Pin 1-2 close. Power on the AC. Reset y our desired password or clear the CMOS data.

17

Motherboard Manual

JPRNT1: Printe r Port Connector


This header allows you to connector printer on the PC.

25

Pin 1 2 3 4 5 6 7 8 9 10 11 12 13

Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5

Pin 14 15 16 17 18 19 20 21 22 23 24 25 26

Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key

18

P4M900-M7 FE/P4M890-M7 FE

JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports


Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3). Pin 2-3 Close: JUSBV1: +5V STB for USB ports at JUSB1/JUSBLAN1. JUSBV2: +5V STB for USB ports at f ront panel (JUSB2/JUSB3).

JUSBV1
1 3

Pin 1-2 close

JUSBV2
1 3

Pin 2-3 close

19

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM


Supports Windows XP, Windows 2000 Professional, and Windows Vista.

4.2

RAID ARRAYS

RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data.

4.3

HOW RAID WORKS

RAID 0:
The controller stripes data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits


Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platf orm. Uses: Intended for non-critical data requiring high data throughput, or any env ironment that does not require f ault tolerance. Benefits: prov ides increased data throughput, especially f or large files. No capacity loss penalty f or parity. Drawbacks: Does not deliver any fault tolerance. If any drive in the array f ails, all data is lost. Fault Tolerance: No.

Blo ck 1 Block 3 Block 5

Block 2 Block 4 Block 6

20

P4M900-M7 FE/P4M890-M7 FE

RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.

Features and Benefits


Drives: Minimum 2, and maximum is 2. Uses: RAID 1 is ideal f or small databases or any other application that requires f ault tolerance and minimal capacity. Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the controller switches to the other drive. Drawbacks: Requires 2 driv es for the storage space of one driv e. Perf ormance is impaired during driv e rebuilds. Fault Tolerance: Yes.

Block 1 Block 2 Block 3

Block 1 Block 2 Block 3

21

Motherboard Manual

CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E


After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system. Note:
If this window didnt show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.

B. Software Installation
To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual
Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note:
Y will need Acrobat Reader to open the manual file. Please download the latest version ou of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html 22

P4M900-M7 FE/P4M890-M7 FE

5.2

AWARD BIOS BEEP CODE


Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically

Beep Sound One long beep followed by two short beeps High-low siren sound

One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install

5.3

EXT RA INFORMAT ION


If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See Close CMOS Header: JCMOS1 section) 2. Wait for seconds. 3. Power on the system again.

CPU Overheated

23

Motherboard Manual

5.4
1.

TROUBLESHOOT ING

Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light dont illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. module snaps into place. System does not boot from hard disk 1. driv e, can be booted f rom optical driv e. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the driv e type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. 1. Back up data and applications System only boots f rom optical driv e. f iles. Hard disk can be read and applications can be used but booting from hard disk 2. Ref ormat the hard driv e. is impossible. Re-install applications and data using backup disks. Screen message says Invalid Rev iew systems equipment. Make sure Conf iguration or CMOS Failure. correct inf ormation is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard driv e. correctly. 2. Run SETUP program and select correct driv e types. Call the drive manuf acturers f or compatibility with other drives.

24

P4M900-M7 FE/P4M890-M7 FE

This page is intentionally left blank.

25

Motherboard Manual

APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN


P4M900-M7 FE LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / zu 3,8 GHz CPU 95W power co nsumption. Untersttzt Hyper-Thre ading / Execute Intel Architecture-64 / Extended Memory 64 Technology FSB Chipsatz 533 / 800 / 1066 MHz VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Grafik Max. 256MB gemei nsam be nutzter Videospeicher ITE 8712F Bietet die hufi g verwe ndete n alte n Super E/A-Funktio nen. Super E/A Low Pin C ount-Schnittstelle Umgebungskontrolle, Hardware-berwachung Lfterdre hzahl-Co ntroller "Smart Guar dian" -Funktion v on ITE DDR2 DIMM-Steckpltze x 2 Untersttzt DDR2 533 / 667 Jeder DIMM untersttzt Arbeitsspe 256/512MB/1GB/2GB DDR2. icher Max. 4GB Ar beitsspeicher Ein-Kanal DDR2 S peichermodul registrierte DIMMs. ECC DIMMs werde n nicht untersttzt. Integrierter IDE-Co ntroller IDE Ultra DMA 33 / 66 / 100 / 133Bus Master-Modus Untersttzt PIO-Modus 0~4, Integrierter Serial ATA-Controller SATA Datentransferr ate bis zu 1.5Gb/s 1.0. LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / zu 3,8 GHz 95W power co nsumption. Untersttzt Hyper-Thre ading / Execute Intel Architecture-64 / Extended Memory 64 Technology 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics Max. 256MB gemei nsam be nutzter Videospeicher ITE 8712F Bietet die hufi g verwe ndete n alte n Super E/A-Funktio nen. Low Pin C ount-Schnittstelle Umgebungskontrolle, Hardware-berwachung Lfterdre hzahl-Co ntroller "Smart Guar dian" -Funktion v on ITE DDR2 DIMM-Steckpltze x 2 Untersttzt DDR2 533 / 667 Jeder DIMM untersttzt 256/512MB/1GB/2GB DDR2. Max. 4GB Ar beitsspeicher Ein-Kanal DDR2 S peichermodul registrierte DIMMs. ECC DIMMs werde n nicht untersttzt. Integrierter IDE-Co ntroller Ultra DMA 33 / 66 / 100 / 133Bus Master-Modus Untersttzt PIO-Modus 0~4, Integrierter Serial ATA-Controller Datentransferr ate bis zu 1.5Gb/s 1.0. P4M890-M7 FE

Celeron D / Celer on 4xx Prozessoren mit bis Celeron D / Celer on 4xx Prozessoren mit bis *It is recommende d to use processors with *It is recommende d to use processors with

Disable Bit / Enha nced I ntel Spee dStep / Disable Bit / Enha nced I ntel Spee dStep /

Konform mit der SATA-Spezifikation Version Konform mit der SATA-Spezifikation Version

26

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y LAN PHY 10 / 100 Mb/s A uto-Negotiation Halb-/ Vollduplex- Funktion Audio-Cod ec Steckpltz e ALC662 Untersttzt High- Definitio n Audio 5.1-Kanal-Audioausgabe PCI-Steckplatz PCI Expr ess x16 Steckplatz PCI Expr ess x 1-Steckplatz Diskettenlaufwerk anschluss Druckeranschluss Anschluss IDE-Anschluss SATA-Anschluss Fronttafela nschluss Onboard-A nschluss Front-Audioa nschluss CD-IN-Anschluss CPU-Lfter-Sockel System-Lfter-Sockel "CMOS lschen"-Sockel USB-Anschluss Stromanschluss (24- polig) Stromanschluss (4-poli g) PS/2-Tastatur PS/2-Maus Rckseiten -E/A Serieller Anschluss VGA-Anschluss LAN-Anschluss USB-Anschluss Audioanschluss Platinengr e. Sonderfun ktionen 190 mm (B) X 244 mm (L) Untersttzt RAID 0 / 1 Windows 2K / XP / VISTA OS-Unters ttzung Biostar behlt sich das Recht v or, ohne Ankndigung die Untersttzung fr ei n Betriebssystem hinzuzufgen oder zu entfernen. x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3 P4M890-M7 FE Realtek RTL 8201CL PH Y 10 / 100 Mb/s A uto-Negotiation Halb-/ Vollduplex- Funktion ALC662 Untersttzt High- Definitio n Audio 5.1-Kanal-Audioausgabe PCI-Steckplatz PCI Expr ess x16 Steckplatz PCI Expr ess x 1-Steckplatz Diskettenlaufwerk anschluss Druckeranschluss Anschluss IDE-Anschluss SATA-Anschluss Fronttafela nschluss Front-Audioa nschluss CD-IN-Anschluss CPU-Lfter-Sockel System-Lfter-Sockel "CMOS lschen"-Sockel USB-Anschluss Stromanschluss (24- polig) Stromanschluss (4-poli g) PS/2-Tastatur PS/2-Maus Serieller Anschluss VGA-Anschluss LAN-Anschluss USB-Anschluss Audioanschluss 190 mm (B) X 244 mm (L) Untersttzt RAID 0 / 1 Windows 2K / XP Biostar behlt sich das Recht v or, ohne Ankndigung die Untersttzung fr ei n Betriebssystem hinzuzufgen oder zu entfernen. x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3

27

Motherboard Manual

FRANCE
P4M900-M7 FE LGA 775 Processeurs Intel Core 2Duo/ P entium 4 / 3,8 GHz UC 95W power co nsumption. Prend en charge les technologies Hyper -Thre ading / d'ex cution de bit de dsactivation / I ntel Spe edStep optimise/ d'architecture I ntel 64 / de mmoire tendue 64 Bus frontal 533 / 800 / 1066 MHz Chipset Graphi que s VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Mo ITE 8712F Fournit la fo nctionnalit de Super E/S patrimoniales la plus utilise. Super E/S Interface faible compte de broc hes Initiatives de co ntrle e nvironnementales, Moniteur de matriel Contrleur de vitesse de ventilateur Fonction " Gardie n i ntelligent" de l'ITE Fentes DDR 2 DIMM x 2 Prend en charge la DDR 2 533 / 667 Chaque DIMM prend e n charge des DDR2 de 256 Mo /512 M o / 1Go / 2 Go Mmoire principale Capacit mmoire maximale de 4 Go voie Les DIMM r egistres et DIMM avec code charge Contrleur IDE intgr IDE 100 / 133 Prend en charge le mode PIO 0~4, Contrleur Serial ATA intgr SATA Taux de transfert jusqu' 1.5 Go/s. Conforme la spcification SATA Version 1.0 LGA 775 Processeurs Intel Core 2Duo/ P entium 4 / 3,8 GHz 95W power co nsumption. Prend en charge les technologies Hyper -Thre ading / d'ex cution de bit de dsactivation / I ntel Spe edStep optimise/ d'architecture I ntel 64 / de mmoire tendue 64 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics Mo ITE 8712F Fournit la fo nctionnalit de Super E/S patrimoniales la plus utilise. Interface faible compte de broc hes Initiatives de co ntrle e nvironnementales, Moniteur de matriel Contrleur de vitesse de ventilateur Fonction " Gardie n i ntelligent" de l'ITE Fentes DDR 2 DIMM x 2 Prend en charge la DDR 2 533 / 667 Chaque DIMM prend e n charge des DDR2 de 256 Mo /512 M o / 1Go / 2 Go Capacit mmoire maximale de 4 Go voie Les DIMM r egistres et DIMM avec code charge Contrleur IDE intgr 100 / 133 Prend en charge le mode PIO 0~4, Contrleur Serial ATA intgr Taux de transfert jusqu' 1.5 Go/s. Conforme la spcification SATA Version 1.0 P4M890-M7 FE

Pentium D / Celeron D / Celeron 4xx jusqu' Pentium D / Celeron D / Celeron 4xx jusqu' *It is recommende d to use processors with *It is recommende d to use processors with

Mmoire vid o partage maximale de 256 Mmoire vid o partage maximale de 256

Module de mmoire DDR2 mode simple Module de mmoire DDR2 mode simple

correcteurs d'erreurs ne so nt pas prises en correcteurs d'erreurs ne so nt pas prises en

Mode pri ncipale de Bus Ultra DMA 33 / 66 / Mode pri ncipale de Bus Ultra DMA 33 / 66 /

28

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y LAN PHY 10 / 100 Mb/s ngociation a utomatique Half / Full duplex capability Codec audio ALC662 Prise en c harge de l'audio haute d finition Sortie audio 5.1 voies Fente PCI Fentes Slot PCI Ex press x16 Slot PCI Ex press x 1 Connecteur de disquette Connecteur IDE Connecteur SATA Connecteur du pa nne au avant Connecteu Connecteur d'entr e CD r Embase de ve ntilateur UC Embase d'e ffacement CMOS Connecteur USB Connecteur d'alimentatio n (24 broches) Connecteur d'alimentatio n (4 br oches) Clavier PS/2 Souris PS/2 E/S du panneau arrire Port srie Port VGA Port LAN Port USB Fiche audio Dimension s de la carte Fonctionna lits spciales Windows 2K / XP / VISTA Support SE Biostar se rserve le droit d'ajo uter o u de supprimer le support de SE avec o u sa ns pravis. Windows 2K / XP Biostar se rserve le droit d'ajo uter o u de supprimer le support de SE avec o u sa ns pravis. Prise en c harge RAID 0 / 1 Prise en c harge RAID 0 / 1 190 mm (l) X 244 mm (H) 190 mm (l) X 244 mm (H) x1 x1 x1 x1 x1 x4 x3 x1 x2 x1 x1 x1 x2 x2 x1 x1 x1 x1 x2 x1 P4M890-M7 FE Realtek RTL 8201CL PH Y 10 / 100 Mb/s ngociation a utomatique Half / Full duplex capability ALC662 Prise en c harge de l'audio haute d finition Sortie audio 5.1 voies Fente PCI Slot PCI Ex press x16 Slot PCI Ex press x 1 Connecteur de disquette Connecteur IDE Connecteur SATA Connecteur du pa nne au avant Connecteur d'entr e CD Embase de ve ntilateur UC Embase d'e ffacement CMOS Connecteur USB Connecteur d'alimentatio n (24 broches) Connecteur d'alimentatio n (4 br oches) Clavier PS/2 Souris PS/2 Port srie Port VGA Port LAN Port USB Fiche audio x1 x1 x1 x1 x1 x4 x3 x1 x2 x1 x1 x1 x2 x2 x1 x1 x1 x1 x2 x1

Connecteur de P ort d'imprimante x1

Connecteur de P ort d'imprimante x1

Connecteur Audio du panneau ava nt x1

Connecteur Audio du panneau ava nt x1

embarqu Embase de ve ntilateur systme x1

Embase de ve ntilateur systme x1

29

Motherboard Manual

IT ALIAN
P4M900-M7 FE LGA 775 Processore Intel Core 2Duo/ Pentium 4 / 3.8 GHz CPU 95W power co nsumption. Supporto di Hyper -Threadi ng / Execute LGA 775 Processore Intel Core 2Duo/ Pentium 4 / 3.8 GHz 95W power co nsumption. Supporto di Hyper -Threadi ng / Execute P4M890-M7 FE

Pentium D / Celeron D / Celer on 4xx fi no a Pentium D / Celeron D / Celer on 4xx fi no a *It is recommende d to use processors with *It is recommende d to use processors with

Disable Bit / Enha nced I ntel Spee dStep / Disable Bit / Enha nced I ntel Spee dStep / Architettura Intel 64 / Tecnologi a Extende d Architettura Intel 64 / Tecnologi a Extende d Memory 64 FSB Chipset 533 / 800 / 1066 MHz VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Grafica La memoria vi deo co ndivisa massima di 256MB ITE 8712F Fornisce le funzio nalit legacy Super I/O usate pi comunemente. Super I/O Interfaccia LPC (L ow Pin Count) Funzioni di co ntrollo dellambiente: Monitoraggio hardware Controller velocit ventolina Funzione "Smart Guardi an" di I TE Alloggi DIMM DDR 2 x 2 Supporto di DDR2 533 / 667 Ciascun DIMM supporta DDR 2 256MB / Memoria principale 512MB / 1GB / 2GB Capacit massima della memori a 4GB DIMM registrati e DIMM ECC no n sono supportati Controller IDE i ntegrato IDE Modalit Bus Master Ultra DMA 33 / 66 / 100 / 133 Supporto modalit PIO Mode 0- 4 Controller Serial ATA inte grato SATA Gb/s. Compatibile specifiche SATA Versione 1.0. Memory 64 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics La memoria vi deo co ndivisa massima di 256MB ITE 8712F Fornisce le funzio nalit legacy Super I/O usate pi comunemente. Interfaccia LPC (L ow Pin Count) Funzioni di co ntrollo dellambiente: Monitoraggio hardware Controller velocit ventolina Funzione "Smart Guardi an" di I TE Alloggi DIMM DDR 2 x 2 Supporto di DDR2 533 / 667 Ciascun DIMM supporta DDR 2 256MB / 512MB / 1GB / 2GB Capacit massima della memori a 4GB DIMM registrati e DIMM ECC no n sono supportati Controller IDE i ntegrato Modalit Bus Master Ultra DMA 33 / 66 / 100 / 133 Supporto modalit PIO Mode 0- 4 Controller Serial ATA inte grato Gb/s. Compatibile specifiche SATA Versione 1.0.

Modulo di memoria DDR2 a canale singolo Modulo di memoria DDR2 a canale singolo

Velocit di trasferimento dei dati fi no a 1.5 Velocit di trasferimento dei dati fi no a 1.5

30

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y LAN PHY Negoziazione automatica 10 / 100 Mb/s Capacit Half / Full Duplex Codec audio ALC662 Supporto audio High -Defin ition (HD) Uscita audio 5 can .1 ali Alloggio PCI Alloggi Alloggio PCI Ex press x16 Alloggio PCI Ex press x1 Connettore flo ppy Connettore Porta stampa nte Connettore IDE Connettore SATA Connettore pa nnello fro ntale Connettore audio frontale Connettori su scheda Connettore CD-in Collettore ventolina CPU Collettore ventolina sistema Collettore cancellazione CMOS Connettore USB Connettore alimentazione (24 pin) Connettore alimentazione (4 pi n) Tastiera PS/2 Mouse PS/2 I/O pannello Porta seriale Porta VGA Porta USB Connettore audio Dimension i scheda Caratterist iche speciali Sistemi operativi supportati Windows 2K / XP / VISTA Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo se nza pre avviso. Windows 2K / XP Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo se nza pre avviso. Supporto RAID 0 / 1 Supporto RAID 0 / 1 x1 x1 x1 x1 x1 x4 x3 x1 x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 P4M890-M7 FE Realtek RTL 8201CL PH Y Negoziazione automatica 10 / 100 Mb/s Capacit Half / Full Duplex ALC662 Supporto audio High -Defin ition (HD) Uscita audio 5 can .1 ali Alloggio PCI Alloggio PCI Ex press x16 Alloggio PCI Ex press x1 Connettore flo ppy Connettore Porta stampa nte Connettore IDE Connettore SATA Connettore pa nnello fro ntale Connettore audio frontale Connettore CD-in Collettore ventolina CPU Collettore ventolina sistema Collettore cancellazione CMOS Connettore USB Connettore alimentazione (24 pin) Connettore alimentazione (4 pi n) Tastiera PS/2 Mouse PS/2 Porta seriale Porta VGA Porta LAN Porta USB Connettore audio x1 x1 x1 x1 x1 x4 x3 x1 x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1

posteriore Porta LAN

190 mm (lar ghezza) x 244 mm (altezza)

190 mm (lar ghezza) x 244 mm (altezza)

31

Motherboard Manual

SPANISH
P4M900-M7 FE LGA 775 Procesador I ntel Core 2Duo / Penti um 4 / 3,8 GHz CPU 95W power co nsumption. Admite Hyper -Threadi ng / Bit de deshabilitacin de ejecuci n / Intel SpeedStep Me jora do / Intel Architecture-64 / Tecnolog a Extended Memory 64 FSB Conjunto de chips Grficos 533 / 800 / 1066 MHz VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Memoria mxima de v deo compartida de 256MB ITE 8712F uso ms comn Sper E/S. Sper E/S Interfaz de cue nta Low Pin Iniciativas de control de entor no, Monitor hardware Controlador de velocida d de ve ntilador Funcin "Guardia intelige nte" de I TE Ranuras DIMM DDR 2 x 2 Admite DDR2 de 533 / 667 Memoria principal /1GB / 2GB Capacidad mxima de memoria de 4GB No a dmite DIMM re gistrados o DIMM compatibles con ECC Controlador IDE inte grado IDE / 133 Soporte los Mo dos PIO 0~4, Controlador ATA Serie Integra do SATA Tasas de transfere ncia de hasta 1.5 Gb/s. Compatible con la versin SATA 1.0. LGA 775 Procesador I ntel Core 2Duo / Penti um 4 / 3,8 GHz 95W power co nsumption. Admite Hyper -Threadi ng / Bit de deshabilitacin de ejecuci n / Intel SpeedStep Me jora do / Intel Architecture-64 / Tecnolog a Extended Memory 64 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics Memoria mxima de v deo compartida de 256MB ITE 8712F uso ms comn Sper E/S. Interfaz de cue nta Low Pin Iniciativas de control de entor no, Monitor hardware Controlador de velocida d de ve ntilador Funcin "Guardia intelige nte" de I TE Ranuras DIMM DDR 2 x 2 Admite DDR2 de 533 / 667 /1GB / 2GB Capacidad mxima de memoria de 4GB No a dmite DIMM re gistrados o DIMM compatibles con ECC Controlador IDE inte grado / 133 Soporte los Mo dos PIO 0~4, Controlador ATA Serie Integra do Tasas de transfere ncia de hasta 1.5 Gb/s. Compatible con la versin SATA 1.0. P4M890-M7 FE

Pentium D / Celeron D / Celer on 4xx hasta Pentium D / Celeron D / Celer on 4xx hasta *It is recommende d to use processors with *It is recommende d to use processors with

Le ofrece las funcionalidades here dadas de Le ofrece las funcionalidades here dadas de

Cada DIMM admite DDR de 256MB / 512MB Cada DIMM admite DDR de 256MB / 512MB

Mdulo de memoria DDR 2 de canal Se ncillo Mdulo de memoria DDR 2 de canal Se ncillo

Modo bus maestro Ultra DMA 33 / 66 / 100 Modo bus maestro Ultra DMA 33 / 66 / 100

32

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y Red Local Negociacin de 10 / 100 Mb/s Funciones Half / F ull dplex Cdecs de sonido ALC662 Soporte de soni do de Alta Defi nicin Salida de sonido de 5.1 canales Ranura PCI Ranuras Ranura PCI Ex press x16 Ranura PCI ex press x 1 Conector disco flexible Conector Puerto de impresora Conector IDE Conector SATA Conector de pa nel fro ntal Conector de sonido frontal Conector de entra da de C D Conectore Cabecera de ve ntilador de C PU s en placa Cabecera de ve ntilador de sistema Cabecera de borrado de CMOS Conector USB Conector de alimentacin (24 patillas) Conector de alimentacin (4 patillas) Teclado PS/2 Ratn PS/2 Panel E/S Puerto serie Puerto de re d local Puerto USB Conector de sonido Tamao de la placa Funciones especiales Soporte de sistema operativo 190mm. (A) X 244 Mm. (H) Admite RAID 0 / 1 Windows 2K / XP / VISTA Biostar se reserva el derecho de a adir o aviso previo. trasero de Puerto VGA X1 X1 X1 X1 X1 X4 X3 X1 X1 X1 X2 X1 X2 X1 X1 X1 X1 X2 X2 X1 X1 X1 X1 P4M890-M7 FE Realtek RTL 8201CL PH Y Negociacin de 10 / 100 Mb/s Funciones Half / F ull dplex ALC662 Soporte de soni do de Alta Defi nicin Salida de sonido de 5.1 canales Ranura PCI Ranura PCI Ex press x16 Ranura PCI ex press x 1 Conector disco flexible Conector Puerto de impresora Conector IDE Conector SATA Conector de pa nel fro ntal Conector de sonido frontal Conector de entra da de C D Cabecera de ve ntilador de C PU Cabecera de ve ntilador de sistema Cabecera de borrado de CMOS Conector USB Conector de alimentacin (24 patillas) Conector de alimentacin (4 patillas) Teclado PS/2 Ratn PS/2 Puerto serie Puerto VGA Puerto de re d local Puerto USB Conector de sonido 190mm. (A) X 244 Mm. (H) Admite RAID 0 / 1 Windows 2K / XP Biostar se reserva el derecho de a adir o aviso previo. X1 X1 X1 X1 X1 X4 X3 X1 X1 X1 X2 X1 X2 X1 X1 X1 X1 X2 X2 X1 X1 X1 X1

retirar el soporte de cualquier SO con o sin retirar el soporte de cualquier SO con o sin

33

Motherboard Manual

PORT UGUESE
P4M900-M7 FE LGA 775 Processador Intel Core2Duo / Pe ntium 4 / GHz CPU 95W power co nsumption. Suporta as tecnologias Hyper -Threa ding / Execute Disable Bit / Enha nced I ntel SpeedStep / Intel Arquitecture -64 / Extende d Memor y 64 FSB Chipset Placa grfica 533 / 800 / 1066 MHz VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics MB ITE 8712F Proporciona as funcionalida des mais utilizadas em termos da especificao Especifica Super I/O. o Super I/O Interface LPC (Low Pi n Co unt). Iniciativas para control o do am biente Monitorizao do hardware Controlador da velocida de da v entoinha Funo "Smart Guardia n" da I TE Ranhuras DIMM DDR2 x 2 Suporta m dulos DDR2 533 / 667 Memria principal DDR2 de 256MB / 512 MB / 1 GB / 2GB Capacidade mxima de memria : 4 GB Os mdulos DIMM r egistados e os DIMM ECC n o so suporta dos Controlador IDE inte grado IDE 133 Suporta o modo PIO 0~4, Controlador Serial ATA integra do Velocidades de transmisso de dados at SATA 1.5 Gb/s. verso 1.0. LGA 775 Processador Intel Core2Duo / Pe ntium 4 / GHz 95W power co nsumption. Suporta as tecnologias Hyper -Threa ding / Execute Disable Bit / Enha nced I ntel SpeedStep / Intel Arquitecture -64 / Extende d Memor y 64 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics MB ITE 8712F Proporciona as funcionalida des mais utilizadas em termos da especificao Super I/O. Interface LPC (Low Pi n Co unt). Iniciativas para control o do am biente Monitorizao do hardware Controlador da velocida de da v entoinha Funo "Smart Guardia n" da I TE Ranhuras DIMM DDR2 x 2 Suporta m dulos DDR2 533 / 667 DDR2 de 256MB / 512 MB / 1 GB / 2GB Capacidade mxima de memria : 4 GB Os mdulos DIMM r egistados e os DIMM ECC n o so suporta dos Controlador IDE inte grado 133 Suporta o modo PIO 0~4, Controlador Serial ATA integra do Velocidades de transmisso de dados at 1.5 Gb/s. verso 1.0. P4M890-M7 FE

Pentium D / Celero n D / Celer on 4xx at 3,8 Pentium D / Celero n D / Celer on 4xx at 3,8 *It is recommende d to use processors with *It is recommende d to use processors with

Memria de vde o mxima partilha da: 256 Memria de vde o mxima partilha da: 256

Cada m dulo DIMM suporta uma memria Cada m dulo DIMM suporta uma memria

Mdulo de memria DDR2 de canal simples Mdulo de memria DDR2 de canal simples

Modo Bus master Ultra DMA 33 / 66 / 100 / Modo Bus master Ultra DMA 33 / 66 / 100 /

Compatibilidade com a especificao SATA Compatibilidade com a especificao SATA

34

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y LAN PHY Auto ne gociao de 10 / 100 MB/s Capacidade semi/full- duplex ALC662 Codec de som Suporta a especificao High-De finition Audio Sada de udio de 5.1 ca nais Ranhura PCI Ranhuras Ranhura PCI Express x 16 Ranhura PCI Express x 1 Conector da para impressora Conector IDE Conector SATA Conector do pai nel fro ntal Conector de udio fro ntal Conector para e ntrada de C Ds Conectore Conector da ve ntoinha da CPU s na placa Conector da ve ntoinha do sistema Conector USB Conector de alimentao (24 pinos) Conector de alimentao (4 pi nos) Teclado PS/2 Entradas/ Sadas no painel traseiro Rato PS/2 Porta srie Porta VGA Porta LAN Porta USB Tomada de udio Tamanho da pl aca Caracterst icas especiais Sistemas Windows 2K / XP / VISTA Windows 2K / XP A Biostar reserva-se o direito de adicionar operativo com ou sem aviso prvio. operativos A Biostar reserva-se o direito de adicionar s operativo com ou sem aviso prvio. Suporta as funes RAID 0 / 1 Suporta as funes RAID 0 / 1 190 mm (L) X 244 mm (A) x1 x1 x1 x1 x1 x4 x3 x1 x1 x2 x1 Conector para limpeza do CMOS x1 x2 x1 x1 x1 x2 x2 x1 x1 x1 x1 P4M890-M7 FE Realtek RTL 8201CL PH Y Auto ne gociao de 10 / 100 MB/s Capacidade semi/full- duplex ALC662 Suporta a especificao High-De finition Audio Sada de udio de 5.1 ca nais Ranhura PCI Ranhura PCI Express x 16 Ranhura PCI Express x 1 Conector da para impressora Conector IDE Conector SATA Conector do pai nel fro ntal Conector de udio fro ntal Conector para e ntrada de C Ds Conector da ve ntoinha da CPU Conector da ve ntoinha do sistema Conector USB Conector de alimentao (24 pinos) Conector de alimentao (4 pi nos) Teclado PS/2 Rato PS/2 Porta srie Porta VGA Porta LAN Porta USB Tomada de udio 190 mm (L) X 244 mm (A) x1 x1 x1 x1 x1 x4 x3 x1 x1 x2 x1 Conector para limpeza do CMOS x1 x2 x1 x1 x1 x2 x2 x1 x1 x1 x1

Conector da unida de de disquetes x 1

Conector da unida de de disquetes x 1

suportado ou remov er suporte para qualquer sistema ou remov er suporte para qualquer sistema

35

Motherboard Manual

POLISH
P4M900-M7 FE LGA 775 Procesor Intel Cor e2Duo/ Penti um 4 / GHz Procesor 95W power co nsumption. Bit / Enhance d I ntel Spee dStep / Intel Architecture-64 / Exte nde d Memory 64 Technol ogy FSB Chipset 533 / 800 / 1066 MHz VIA P4M900 VIA VT8237A Chrome9 HC 3D / 2D Graphics Grafika Maks. wielko wspdzielonej pamici video wy nosi 256MB Gniazda DDR 2 DIMM x 2 Obsuga DDR2 533 / 667 Kade gniazdo DIMM obsuguje mo duy Pami gwna 256MB /512MB / 1GB / 2GB DDR2 Maks. wielko pamici 4GB Modu pamici DDR2 z trybem poje dynczego kanau Brak obsugi Registered DIMM or az ECC DIMM ITE 8712F Zapewnia najbardziej powszechne funkcje Super I/O. Super I/O Interfejs L ow Pin Count Funkcje kontroli warunkw prac y, Monitor H/W Kontroler pr dkoci wentylatora Funkcja ITE "Smart Guar dian" Zintegrowany kontroler IDE IDE Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsuga PIO tryb 0~4, Zintegrowany kontroler Serial ATA SATA Transfer da nych do 1.5 Gb/s. Zgodno ze specyfikacj SATA w wersji 1.0. LGA 775 Procesor Intel Cor e2Duo/ Penti um 4 / GHz 95W power co nsumption. Bit / Enhance d I ntel Spee dStep / Intel Architecture-64 / Exte nde d Memory 64 Technol ogy 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics Maks. wielko wspdzielonej pamici video wy nosi 256MB Gniazda DDR 2 DIMM x 2 Obsuga DDR2 533 / 667 Kade gniazdo DIMM obsuguje mo duy 256MB /512MB / 1GB / 2GB DDR2 Maks. wielko pamici 4GB Modu pamici DDR2 z trybem poje dynczego kanau Brak obsugi Registered DIMM or az ECC DIMM ITE 8712F Zapewnia najbardziej powszechne funkcje Super I/O. Interfejs L ow Pin Count Funkcje kontroli warunkw prac y, Monitor H/W Kontroler pr dkoci wentylatora Funkcja ITE "Smart Guar dian" Zintegrowany kontroler IDE Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master obsuga PIO tryb 0~4, Zintegrowany kontroler Serial ATA Transfer da nych do 1.5 Gb/s. Zgodno ze specyfikacj SATA w wersji 1.0. P4M890-M7 FE

Pentium D / Celero n D / Celero n 4xx do 3,8 Pentium D / Celero n D / Celero n 4xx do 3,8 *It is recommende d to use processors with *It is recommende d to use processors with Obsuga Hyper-Threa ding / Exec ute Disable Obsuga Hyper-Threa ding / Exec ute Disable

36

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y 10 / 100 Mb/s z automatyczn negocjacj LAN PHY szybkoci Dziaanie w trybie poowicznego / penego dupleksu Kodek dwikowy ALC662 Obsuga Hi gh- Definitio n Audio 5.1 ka naowe wy jcie audio Gniazdo PCI Gniazda Gniazdo PCI Express x 16 Gniazdo PCI Express x 1 Zcze napdu dyskietek Zcze Port druk arki Zcze IDE Zcze SATA Zcze panela przedniego Przednie zcze a udio Zcza wbudowan e Zcze wejcia CD Zcze gwkowe wentylatora procesora Zcze gwkowe wentylatora systemowego Zcze gwkowe kasowani a CMOS Zcze USB Zcze zasilania (24 pi nowe) Zcze zasilania (4 pinowe) Klawiatura PS/2 Mysz PS/2 Back Panel I/O Port szeregowy Port VGA Port LAN Port USB Gniazdo audio Wymiary pyty Funkcje specjalne Obsluga systemu operacyjn ego 190 mm (S) X 244 mm (W) Obsuga RAID 0 / 1 Windows 2K / XP / VISTA Biostar zastrzega sobie prawo do dawania lub o dwoywania obsugi dowolne go x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3 x1 x1 x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 P4M890-M7 FE Realtek RTL 8201CL PH Y 10 / 100 Mb/s z automatyczn negocjacj szybkoci Dziaanie w trybie poowicznego / penego dupleksu ALC662 Obsuga Hi gh- Definitio n Audio 5.1 ka naowe wy jcie audio Gniazdo PCI Gniazdo PCI Express x 16 Gniazdo PCI Express x 1 Zcze napdu dyskietek Zcze Port druk arki Zcze IDE Zcze SATA Zcze panela przedniego Przednie zcze a udio Zcze wejcia CD Zcze gwkowe wentylatora procesora Zcze gwkowe wentylatora systemowego Zcze gwkowe kasowani a CMOS Zcze USB Zcze zasilania (24 pi nowe) Zcze zasilania (4 pinowe) Klawiatura PS/2 Mysz PS/2 Port szeregowy Port VGA Port LAN Port USB Gniazdo audio 190 mm (S) X 244 mm (W) Obsuga RAID 0 / 1 Windows 2K / XP Biostar zastrzega sobie prawo do dawania lub o dwoywania obsugi dowolne go x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3 x1 x1 x2 x1 x1 x1 x1 x2 x2 x1 x1 x1

systemu operacyjnego bez powiadomienia. systemu operacyjnego bez powiadomienia.

37

Motherboard Manual

RUSSIAN
P4M900-M7 FE LGA 775 Intel Core 2Duo/ Pe ntium 4 / Pentium D / Celeron D / Celer on 4xx 3.8 P4M890-M7 FE LGA 775 Intel Core 2Duo/ Pe ntium 4 / Pentium D / Celeron D / Celer on 4xx 3.8

CPU ( *It is recommende d to use processors *It is recommende d to use processors with 95W power consumption. with 95W power consumption. ) Hy per-Thre ading Hy per-Thre ading / Execute Disable Bit / Enhance d Intel SpeedStep / Intel Architecture-64 / Extende d Memor y 64 Technology FSB 533 / 800 / 1066 VIA P4M900 VIA VT8237A / Execute Disable Bit / Enhance d Intel SpeedStep / Intel Architecture-64 / Extende d Memor y 64 Technology 533 / 800 / 1066 VIA P4M890 VIA VT8237A

Chrome9 HC 3D / 2D Graphics Chrome9 HC 3D / 2D Graphics 256 DDR2 DIMM x 2 DDR2 533 / 667 DIMM 256MB / 512 / 1 / 2 DDR2 4 DDR2 DIMM and ECC DIMM ITE 8712F Super I/O. , ITE "Smart Guardian" ( ) 256 DDR2 DIMM x 2 DDR2 533 / 667 DIMM 256MB / 512 / 1 / 2 DDR2 4 DDR2 DIMM and ECC DIMM ITE 8712F Super I/O. , ITE "Smart Guardian" ( )

Super I/O

IDE

"" Ultra DMA 33 / 66 "" Ultra DMA 33 / 66 / 100 / 133 PIO 0~4, ATA 1.5 /. SATA 1.0. / 100 / 133 PIO 0~4, ATA 1.5 /. SATA 1.0.

SATA

38

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y 10 / 100 / / ALC662 High-De finition 5.1 PCI x2 PCI Ex press x16 x1 PCI Ex press x 1 x1 P4M890-M7 FE Realtek RTL 8201CL PH Y 10 / 100 / / ALC662 High-De finition 5.1 PCI x2 PCI Ex press x16 x1 PCI Ex press x 1 x1 x1 x1 IDE x2 SATA x2 x1 x1 CD x1 x1 x1 CMOS x1 USB- x2 ( 24 ) x1 ( 4 ) x1 PS/ 2 PS/2 VGA LAN USB- 190 ( ) X 244 () x1 x1 x1 x1 x1 x4 x3

x1 x1 IDE x2 SATA x2 x1 x1 CD x1 x1 x1 CMOS x1 USB- x2 ( 24 ) x1 ( 4 ) x1 PS/ 2 PS/2 VGA LAN USB- x1 x1 x1 x1 x1 x4 x3

190 ( ) X 244 () RAID 0 / 1 Windows 2K / XP / VISTA Biostar OS .

RAID 0 / 1

OS

Windows 2K / XP Biostar OS .

39

Motherboard Manual

ARABIC
P4M890-M7 FE 577 LGA P4M900-M7 FE 577 LGA Intel Core2Duo/ Pe ntium 4 / Pentium Intel Core2Duo/ Pe ntium 4 / Pentium 3.8 D / C eleron D / Celer on 4xx 3.8 D / C eleron D / Celer on 4xx .95W power co nsumption .95W power co nsumption *It is recommended to use processors with *It is recommended to use processors with

Hyper -Thre ading / Exec ute Disabl e Hyper -Thre ading / Exec ute Disabl e / Bit / Enhance d I ntel Spee dStep Extende d Memor y 64 Technology 6601 / 008 / 335 098VIA P4M VIA VT8237A Chrome9 HC 3D / 2D Graphics 652 / Bit / Enhance d I ntel Spee dStep Extende d Memor y 64 Technology 6601 / 008 / 335 009VIA P4M VIA VT8237A Chrome9 HC 3D / 2D Graphics 652

DDR2 DIMM

DDR2 DIMM

766 / 335 2 DDR 2 DDR DIMM

766 / 335 2 DDR 2 DDR DIMM

1 / 2 215/ 652
4 2DDR ECC DIMM ITE 8712F . Super I /O Low Pi n Count

1 / 2 215/ 652
4 2DDR ECC DIMM ITE 8712F . Super I /O Low Pi n Count

Interface

Interface
Super I/O

: ITE ""Smart Guar dian IDE 331 / 001 / 66 / 33 Ultra DMA 4~0 PIO Mode Serial ATA 5.1 / . .0.1 SATA

: ITE ""Smart Guar dian IDE 331 / 001 / 66 / 33 Ultra DMA 4~0 PIO Mode Serial ATA 5.1 / . .0.1 SATA

IDE

SATA

04

P4M900-M7 FE/P4M890-M7 FE
P4M890-M7 FE Realtek RTL 8201CL PH Y 01/ 001 / / 266ALC 1.5 P4M900-M7 FE Realtek RTL 8201CL PH Y 01/ 001 / / 266ALC 1.5

2 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 4 3

PCI 61PCI Expressx 1 PCI Express x IDE SATA CD-IN CMOS USB )42( )4 ( 2/PS 2/PS VGA USB 091 ) ( 244 X ) (
1 / 0 RAID Windows 2K / XP

2 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 4 3

PCI 61PCI Expressx 1 PCI Express x IDE SATA CD-IN CMOS USB )42( )4 ( 2/PS 2/PS VGA USB 091 ) ( 244 X ) (
1 / 0 RAID Windows 2K / XP / VISTA /

Biostar .

Biostar .

14

Motherboard Manual

JAPANESE
P4M900-M7 FE LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / GHz CPU 95W power co nsumption. Hyper -Thre ading / Exec ute Disabl e Bit / Enha nced Intel SpeedStep / I ntel Architecture-64 / Exte nde d Memory 64 Technol ogy FSB 533 / 800 / 1066 MHz VIA VT8237A LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / GHz 95W power co nsumption. Hyper -Thre ading / Exec ute Disabl e Bit / Enha nced Intel SpeedStep / I ntel Architecture-64 / Exte nde d Memory 64 Technol ogy 533 / 800 / 1066 MHz VIA P4M890 VIA VT8237A Chrome9 HC 3D / 2D Graphics 256MB DDR2 DIMM x 2 DDR2 533 / 667 P4M890-M7 FE

Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.8 *It is recommende d to use processors with *It is recommende d to use processors with

VIA P4M900 Chrome9 HC 3D / 2D Graphics 256MB DDR2 DIMM x 2 DDR2 533 / 667

DIMM 256/ 512MB/1GB/ 2GB DDR2 DIMM 256/ 512MB/1GB/ 2GB DDR2 4GB 4GB

DDR 2 DDR 2 DIMMECC DIMM ITE 8712F Super I/O DIMMECC DIMM ITE 8712F Super I/O H/W / ITE IDE

Super I/O

H/W / ITE IDE

IDE

Ultra DMA 33 / 66 / 100 / 133 Ultra DMA 33 / 66 / 100 / 133 PIO Mode 0~4 ATA PIO Mode 0~4 ATA 1.5 Gb/ SATA1.0

SATA

1.5 Gb/ SATA1.0

42

P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE Realtek RTL 8201CL PH Y LAN PHY 10 / 100 Mb/ / Codec ALC662 5.1 PCI PCI Expr ess x16 PCI Expr ess x 1 IDE SATA CD CPU CMOS USB (24) (4) PS/2 PS/2 I/O VGA LAN USB OS 190 mm () X 244 mm () RAID 0 / 1 Windows 2K / XP / VISTA x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3 P4M890-M7 FE Realtek RTL 8201CL PH Y 10 / 100 Mb/ / ALC662 5.1 PCI PCI Expr ess x16 PCI Expr ess x 1 IDE SATA CD CPU CMOS USB (24) (4) PS/2 PS/2 VGA LAN USB 190 mm () X 244 mm () RAID 0 / 1 Windows 2K / XP x2 x1 x1 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 x1 x1 x4 x3

BiostarOS BiostarOS

2008/04/07

43

S-ar putea să vă placă și