Documente Academic
Documente Profesional
Documente Cultură
The width of proportional characters during multipoint mode varies depending on your selected point size. The width is calculated based on the width of proportional 10-point (10.5-point) characters, using the following formula:
INT
(character width) =
inch
The base width in the above equation is the width listed for each character in the 24/48-pin proportional width tables in the next section. For example, the width of a 26-point e would be determined as follows:
INT
(2 6 ) ( 3 0 ) + 0. 5 1 0. 5
360
inch
IN T (7 4 .7 8 6 ) 360 74 360
inch
inch
Upright and italic characters, 24-pin Character Code Width SP 32 30 ! 33 18 " # $ % & ' ( 34 35 36 37 38 39 40 30 30 30 36 36 18 24
Upright and italic characters, 24-pin Character Code Width ; 59 18 < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c
A-22
Upright and italic characters, 24-pin Character Code Width d 100 36 e f g h i j k l m n o p q r s t u v w x y z { | } ~ none 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 30 24 36 36 18 24 36 18 42 36 30 36 36 30 30 24 36 36 42 30 36 30 24 18 24 30 none 36 36 30 30 30 30 30 30 30 30 30 18 18
Upright and italic characters, 24-pin Character Code Width 141 18 Pt 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 36 36 36 42 42 30 30 30 36 36 36 36 42 30 30 36 42 30 30 18 30 36 36 36 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
30 30 30 30 36 36 36 36 36 36 36 36 36 24 30 36 36 42 36 36 36 36 36 36 36 42 36 42 36 36 30 24 30 24 30 30 18 30 36 30
Upright and italic characters, 24-pin Character Code Width 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
Upright and italic characters, 24-pin Character Code Width 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 SP 253 254 255 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
Upright and italic international characters, 24-pin Character Code Width none 24 W Pt none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none 30 36 36 30 30 30 36 30 30 30 30 30 30 18 36 42 36 36 42 42 30 30 36 36 42 30 36 42 36 36 30 30
A-23
Upright and italic superscript/subscript characters, 24-pin Character Code Width SP 32 20 ! " # $ % & ' ( ) * + , . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G
A-24
Upright and italic superscript/subscript characters, 24-pin Character Code Width H 72 24 I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m n o 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 16 20 24 24 28 24 24 24 24 24 24 24 28 24 28 24 24 20 16 20 16 20 20 12 20 24 20 24 20 16 24 24 12 16 24 12 28 24 20
Upright and italic superscript/subscript characters, 24-pin Character Code Width p 112 24 q r s t u v w x y z { | } ~ none 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 24 20 20 16 24 24 28 20 24 20 16 12 16 20 none 24 24 20 20 20 20 20 20 20 20 20 12 12 12 24 24 24 28 28 20 20 20 24 24
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
12 20 20 20 24 24 12 16 16 20 20 12 20 12 20 20 20 20 20 20 20 20 20 20 20 12 12 20 20 20 20 24 24 24 24 24 24 24 24
Upright and italic superscript/subscript characters, 24-pin Character Code Width 152 24 Pt 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 24 28 20 20 24 28 20 20 12 20 24 24 24 20 20 20 20 20 20 20 12 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Upright and italic superscript/subscript international characters, 24-pin Character Code Width none 20 W Pt none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none 24 24 20 20 20 24 20 20 20 20 20 20 20 12 24 42 24 24 28 28 20 20 24 24 28 20 24 28 24 24 20 12
Upright and Italic legal characters, 24-pin Character Code Width none 30 , none none none none none none none none 30 18 36 36 18 30 36 30
Upright and italic superscript/subscript legal characters, 24-pin Character , Code none none none none none none none none none Width 30 30 18 36 36 18 30 36 30
A-25
Code 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
Width 12 5 8 12 12 12 12 5 6 6 12 12 7 12 6 10 12 8 12 12 12 12 12 12 12 12 6 6 10 12 10 12 12 12 12
Upright characters, 9-pin Character Code Width f 102 10 g h i j k l m n o p q r s t u v w x y z { | } ~ none 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 11 11 8 9 10 8 12 11 12 11 11 11 12 11 12 12 12 10 12 10 9 5 9 12 none 12 11 12 12 12 12 12 11 12
Upright characters, 9-pin Character Code Width 137 12 Pt 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 12 8 10 8 12 12 12 12 12 10 10 10 11 11 12 12 12 11 12 12 12 11 12 8 10 11 11 12 12 12 12 12 12 12 12 5 12 12 12 12 12
Upright characters, 9-pin Character Code Width 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Upright characters, 9-pin Character Code Width 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 SP 253 254 255 12 12 12 12 11 10 12 10 11 11 12 10 12 12 12 12 12 10 10 12 12 10 10 12 12 12 12 8 6 6 12 8 8 8 12
A-27
Upright international characters, 9-pin Character Code Width none 8 Pt none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none none 12 11 8 12 12 10 11 12 12 12 12 11 12 8 12 12 12 12 12 10 10 11 12 12 12 12 12 11 12 12 5
Italic characters, 9-pin Character Code Width % 37 12 & ' ( ) * + , . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 12 5 8 8 12 12 8 12 7 10 12 9 12 12 12 12 11 12 12 11 8 9 10 11 9 11 12 12 12 12 12 12 12 12 12 10 12 12 10
Italic characters, 9-pin Character Code Width M 77 12 N O P Q R S T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 12 12 12 12 12 12 12 12 11 12 12 12 12 11 7 11 10 12 5 11 11 11 12 11 12 11 11 9 10 11 9 11 10 11 11 11 10 11 10
F G H I J K L
33 34 35 36
10 10 12 11
Italic characters, 9-pin Character Code Width u 117 11 v w x y z { | } ~ none 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 10 12 12 11 12 10 9 10 12 none 12 12 11 12 11 11 11 11 12 11 11 10 11 8 12 12 12 12 12 12 11 11 11 11 11 12 12 11 11
Italic characters, 9-pin Character Code Width 157 12 Pt 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 12 12 11 10 12 11 12 12 11 12 11 12 12 12 12 10 12 12
Italic international characters, 9-pin Character Code Width none 12 Pt none none none none none none none none none none none none none none 12 12 11 11 11 12 12 12 12 12 12 12 11 10
Italic international characters, 9-pin Character Code Width none 8 none none none none none none none none none none none none none none none none 12 11 9 12 12 12 12 11 11 11 11 11 11 8 12 12
Proportional Width Information A-29
A-30
Parallel Interface
EPSON printers feature an industry standard Centronics Parallel type interface. The printer side of this interface utilizes a 36 Pin connector. The pin assignments for this connector are as follows: Pins and signals Signal Pin Return Pin
1 19
Signal STROBE
Direction IN
Description STROBE pulse to read data. Pulse width must be more than 0.5 microseconds at the receiving terminal. These signals represent information of bits 1 to 8 of parallel data, respectively. Each signal is at HIGH level when data is logical 1 and LOW when it is logical 0.
2 3 4 5 6 7 8 9 10
20 21 22 23 24 25 26 27 28
IN IN IN IN IN IN IN IN OUT
About an 11-microsecond pulse. LOW indicates that data has been received and that the printer is ready to accept more data. A HIGH signal indicates that the printer cannot receive data. The signal goes HIGH in the following cases: 1) During data entry (ea. char. time) 2) During a printer-error A HIGH signal indicates that the printer is out of paper. Always at high level when the printer is on. When this signal is LOW, the paper is automatically fed 1 line after printing. (The signal level can be fixed to LOW by setting the DIP switch or SelecType. See the users guide of each printer.)
11
29
BUSY
OUT
12 13 14
30
OUT OUT IN
Parallel Interface
A-31
Direction IN
Description Not used. Logic ground level. Printers chassis ground, which is isolated from the logic ground. Not used. Twisted-pair return signal ground level. When this level becomes LOW, the printer controller is reset to its power-up state and the print buffer is cleared. This level is normally HIGH; its pulse width must be more than 50 microseconds at the receiving terminal. This level becomes LOW when the printer is: 1) In paper out state. 2) In error state. Same as for Pins 19-30. Not used. Pulled up to 5V through 3.3 k resistance. The DC1/DC3 code is valid only when this SLCT IN signal is HIGH. (Internal fixing can be carried out with the jumper switch. The level of this signal is factory-set to LOW.) Some printers do not use this function. For specific information, see the users guide of each printer.
32
ERROR
OUT
33 34 35 36
GND NC SLCT IN or NC
OUT IN or
Note: The values may vary from printer to printer. See the users guide of your printer. The column heading Direction refers to the direction of signal flow as viewed from the printer. Return denotes the twisted-pair return, to be connected at signal ground level. For the interface wiring, be sure to use a twisted-pair cable for each signal and to complete the connection on the return side. To prevent noise, these cables should be shielded and connected to either the chassis of the host computer or the printer (but not at both ends). All interface conditions are based on TTL level. Both the rise and the fall times of each signal must be less then 0.2 microseconds. Data tranfer must be carried out by observing the ACKNLG or BUSY signal. (Data transfer to this printer can be carried out only after receipt of the ACKNLG signal or when the level of the BUSY signal is LOW.)
A-32
Parallel Interface
Parallel interface timing 9-pin printers (excluding MX-series, and LX-300 and later printers)
BUSY ACKNLG DATA STROBE 0.5 s (min.) 0.5 s (min.) 0.5 s (min.) Approx. 5 s Approx. 7 s
24/48-pin printers (excluding LQ-1500, SQ-2000, and LQ-300 and later printers)
BUSY ACKNLG DATA STROBE 0.5 s (min.) 0.5 s (min.) 0.5 s (min.) Approx. 5 s Approx. 5 s
MX-series printers
BUSY ACKNLG DATA STROBE 0.5 s (min.) 0.5 s (min.) 1.0 s (min.) Approx. 5 s Approx. 5 s
LQ-1500, SQ-2000
BUSY ACKNLG DATA STROBE 0.5 s (min.) 0.5 s (min.) 0.5 s (min.) Approx. 4.5 s Approx. 4.5 s
Parallel Interface
A-33
LX-300 and later 9-pin printers, and LQ-300 and later 24/48-pin printers
BUSY ACKNLG DATA STROBE 0.5 s (min.) 0.5 s (min.) 0.5 s (min.)
The flow chart shown below illustrates the recommended procedure for checking the status of a parallel interface. Parallel interface flow chart
Start
ERROR signal
Error
Not Error
Busy
BUSY signal
Yes
A-34
Parallel Interface
A-35
DTR signal and XON/XOFF The DTR signal is MARK and an XOFF code (DC3, 13H) is transmitted when the available input buffer space drops to 256 bytes. The DTR signal is SPACE and an XON (DC1, 11H) is transmitted when the available input buffer space returns to 256 bytes. ETX, ACK/NAK d At the time the printer receives an ETX (03H) command, if the available buffer space is more than 256 bytes, the printer sends an ACK (06H) code in reply, or if the available buffer space is less than 256 bytes, the printer sends NAK (15H) and d (64H) codes continuously. The ETXACK handshaking protocol can be enabled or disabled altering the default settings.
Error handling
When a parity error is detected, the received byte is changed to the * character code. Overrun errors and framing errors are ignored.
A-36
A-37
You can use the ESC X command to select fonts identical to those available in non-ESC/P 2 printers. Send the ESC X parameters on the right to obtain the point and pitch sizes selected by the commands on the left.
ESC X nL 21 21 21 42 21 21 42 42 21 12 21 42 21 21 42 42 1 21 21 42 21 21 42 42 21 42
SO ESC P 3
SI
ESC w 1
Point 10.5 10.5 10.5 21 10.5 10.5 21 21 10.5 10.5 10.5 21 10.5 10.5 21 21 10.5 10.5 10.5 21 10.5 10.5 21 21 10.5 21
Pitch 10 5 17.14 10 8.57 5 17.14 8.57 12 6 20 12 10 6 20 10 15 7.5 15 15 7.5 7.5 15 7.5 Prop. Prop.
m 36 72 21 36 42 72 21 42 30 60 18 30 36 60 18 36 24 48 24 24 48 48 24 48 1 1
nH 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
A-38