Sunteți pe pagina 1din 6

CHUBB SAFE DEPOSIT LOCKERS

Security trusted by people worldwide

CHUBB SAFE DEPOSIT LOCKERS


Chubb Malaysia Sdn Bhd
(Company No. 7652-K) Kompleks Sime Darby, Persiaran Kewajipan,USJ 7, 47600 UEP Subang Jaya, Selangor Darul Ehsan, Malaysia. Tel : 03-5635 3050 Fax : 03-5635 3066
Website : www.chubbmalaysia.com

LOCKER CONFIGURATIONS
10 INCH MODULE
2 (51mm) 2 - 8 (813mm)
CHUBB

CORNICE A member of the Sime Darby Group

3 - 5 (1042mm) 1 (25mm)

36UK305 36 UK 305 - 36 LOCKERS NETT WEIGHT : 183KG 18UK310 30 UK 405 - 30 LOCKERS NETT WEIGHT : 169KG 24 UK 505 - 24 LOCKERS NETT WEIGHT : 160KG

7 - 4 1/2 (2249mm)

Push

SEPARATOR & PULL-OUT SHELF

12UK510 3 - 5 (1042mm)

18 UK 310 - 18 LOCKERS NETT WEIGHT : 153KG

15 UK 410 - 15 LOCKERS NETT WEIGHT : 134KG

12 UK 510 - 12 LOCKERS NETT WEIGHT : 133KG

EXTERNAL DIMENSIONS HEIGHT


6UK1010

20 1/ 2 32 235/8

521mm Distributor/Dealer Details 813mm 600mm

WIDTH DEPTH
PLINTH 3 1/2 (89mm) 6 UK 1010 - 6 LOCKERS NETT WEIGHT : 100KG

8 INCH MODULE
2 (51mm) 2 - 8 (813mm)
CHUBB

CORNICE

3 - 5 (1042mm)

36UK208

36 UK 208 - 36 LOCKERS NETT WEIGHT : 197KG 1 (25mm)

20 UK 408 - 20 LOCKERS NETT WEIGHT : 150KG

7 - 4 1/2 (2249mm)

20UK408

Push

SEPARATOR & PULL-OUT SHELF

3 - 5 (1042mm)

4UK408/ 8UK808

4 UK 408 - 4 LOCKERS 8 UK 808 - 8 LOCKERS NETT WEIGHT : 140KG

4 UK 408 - 4 LOCKERS 4 UK 816 - 4 LOCKERS NETT WEIGHT : 140KG

QUALITY SYSTEM

EXTERNAL DIMENSIONS
4UK408/ 2UK1616

HEIGHT WIDTH
4 UK 408 - 4 LOCKERS 2 UK 1616 - 2 LOCKERS NETT WEIGHT : 100KG

20 1/ 2 32 235/8

521mm 813mm 600mm

SIRIM MS ISO 9002 Registration No : AR 0238

PLINTH 3 1/2 (89mm)

DEPTH

Note : Chubb policy is one of constant improvement. We reserve the right to alter any specification contained in this publication without prior notification.

Catalogue Reference No : 1/4/01

CHUBB SAFE DEPOSIT LOCKERS

ACCESS, LIGHTING AND VENTILATION


ACCESS The identity of the client entering the vaults must first be checked. This can first be done by creating a vestibule area fenced off from the vault by a strong steel grille gate. LIGHTING For security reasons, electrical wiring should only pass through the walls of the vault by a special conduit connected to a concealed switch to the main door. Automatic switching-off ensures that the current is dead while the doors remain closed. This eliminates the possibility of fires through short circuits. As a security precaution, electrical outlets are generally not fitted within the vaults to minimize the possibility of burglars exploiting the easy access to electricity available for power tools. LOCKER GROUPS A Locker Group may consist of an amalgamation of different Safe Deposit Box sizes. The number of boxes in each section is predetermined according to the size of each box. An outline of the various locker configurations are available at the back of this brochure. It must be emphasized that the standard size and section arrangements described in this brochure are not arbitary. Each locker installation can be designed to suite individual requirements. Naturally, the use of standard units achieves a distinct cost saving and promotes a better delivery time.

DOOR HUNG The standard hung for Safe Deposit Lockers is right hung but where this may be inconvenient, for e.g., providing access to a right handed group of lockers installed right to the wall, the hung may be reversed accordingly. Kindly ensure that the hung of the doors are verified when ordering.

Left, breathing tubes incorporated into the Vault Door frame. Right, As with all Chubb security products, you can feel secure with the knowledge that they are backed by Chubbs extensive network of branches providing sales and technical support throughout most states nationwide.

VENTILATION As any ventilation device through the walls, floors or ceiling can weaken the vault, Chubb Vault Doors have breathing tubes incorporated into the frame of the door. These tubes incorporate safety features like a forced fan and wire mesh netting, providing security and comfort to anyone who may be trapped in the vault.

NOTE : For security reasons, none of the photographs of locker installations printed in this brochure can be identified. However, for reference purposes, a complete list of clients who have installed Chubb Safe Deposit Lockers are available upon request.

CHUBB SAFE DEPOSIT LOCKERS

TOTAL SECURITY
The concept of Total Security incorporates the elimination of all possible methods of attack in order to reduce the possibility of a successful robbery. This includes evaluating the construction of the vault itself, the door securing the vault and any other feature which enhances the vaults resistance to any attempted attack. VAULT DESIGN & CONSTRUCTION Safe Deposit Lockers form the core of most vaults. They are only as safe as the vault in which they are housed. The main vault door is the focal point of any vault protecting a Safe Deposit Locker Installation. Its role as Protector to Safe Deposit Lockers dictates that its strength and reliability cannot be compromised. The door must be depended upon to provide resistance against an attempted attack; while under normal conditions will be expected to be durable against daily openings and closings. The vault wall also requires a strength which is consistent and reliable. Conventional brick walls are generally not built to withstand attacks similar in intensity to those attempted on vault doors. Chubb reinforces their constructed walls using special steel reinforcement. The Chubb Tangbar reinforcement robs the prospective burglar of his most important tool time.
Above, Chubb Tangbars being installed before reinforced concrete is poured into the wall cavity. For comprehensive protection, the Tangbar may be incorporated in all walls, floors and ceilings.

The Chubb Tangbar is a specially designed anti-burglar reinforcement used in vaults. The Tangbar is constructed from steel, stamped into the form of a double comb and when twisted, the tangs radiate in all directions. The design of a twisted comb is irregular as it forms an inconsistent design caging and reinforcing the concrete. More importantly, the Tangbar increases the diffifulty of penetration as it forms a cage of metal distributed throughout the concrete.

Above, Chubb Tangbars in comb form before twising.

Above and Right, a cross-sectional view of the overlapping design of a Tangbar inside a wall.

Above, simplicity with strength are hallmarks of the Tangbars design. Preparation of the Tangbar may be effected by unskilled labour using equipment provided - achieving distinct cost savings and shortening construction time.

INNER CONTAINERS All lockers are supplied with a lockable inner container. These are supplied with a hasp and staple to accept the renters own padlock.

NUMBERING Within each group of lockers, the numbers commonly start at the top left corner and run horizontally in rows to the bottom right corner. Other numbering systems can also be accommodated.

Centre Page, a 41/2 Main Vault Door with Stainless Steel cladding securing a vault housing several configurations of Safe Deposit Lockers. Inset, a 31/2 Standard Quality Door in Painted Finish.

CHUBB SAFE DEPOSIT LOCKERS

Chubb Safe Deposit Locker installation offers depositors an opportunity to benefit from maximum security for their valuables without having to spend immense amounts individually to attain an acceptable level of security. As such, it forms an effective barrier against crime in general while providing a sense of security to both Depositor and the Guarding Entity alike.

DUAL CONTROL LOCKING MECHANISM


A Chubb Safe Deposit Locker incorporates a design and durability of the highest order. Its two separate sets of locks of 10 levers each can only be opened using the unique Chubb key. With such a vast range of variations, the possibility of 2 keys being identical are virtually impossible. Each locker is fitted with a dual control lock with 2 keyholes. One key is for the Renter and the other for the Custodian. This ensures that the Custodian (normally a senior person at the reception) has to be present when any safe deposity locker is accessed. The Custodians key must be first inserted and turned before the Renters key can be used. The locking bolt may then only be withdrawn to open the door and to retrieve the inner container. The Custodian may then withdraw his key as the Renters key is only required to relock the Safe Deposit Locker. The lock is also designed to make it impossible for the Renter to remove his key without first closing and locking the door. For increased security, the lock on each Safe Deposit Locker should be change each time it is evacuated. When Lockers are supplied, it is recommended that additional spare locks are provided for and are keyed as extensions to the system.

A Chubb Safe Deposit Locker installation is also a value-added service to any business. Apart from its revenue generating purpose, a safe deposit installation enhances the range of services that a business entity can offer to its clients. Chubb Safe Deposit Lockers are among those installed throughout the globe in many of the worlds finest financial institutions. Trusted as the world leader in Safe Deposit Lockers installations, Chubb Safe Deposit lockers offer an unrivaled level of security while remaining committed to its core values of trust and security. No two Safe Deposit Locker Installations are identical. Each installation is treated individually and is carefully planned to meet local requirements. This brochure outlines the basic considerations of Safe Deposit Locker design. When contacted at the intial planning stages, security installation problems peculiar to your needs can be thoroughly studied and detailed plans may be submitted without obligation.
Chubb 10-lever Ava Lock

S-ar putea să vă placă și