Documente Academic
Documente Profesional
Documente Cultură
M400 / M1400
Full Port Ductile Iron Single Chamber Basic Valve with Mechanical Check Feature
The Watts ACV Models M400 and M1400 are full port, single chamber basic valves that incorporate a two-piece disc and diaphragm assembly. This assembly is the only moving part within the valve allowing it to open, close, or modulate as commanded by the pilot control system. The lower portion of this two-piece assembly is a mechanical check feature, which acts independent of diaphragm position or pilot control system, and provides immediate check action when flow ceases. Model M400: Globe Pattern Single Chamber Basic Valve with Mechanical Check Feature. Model M1400: Angle Pattern Single Chamber Basic Valve with Mechanical Check Feature.
M400 (Globe)
I C H
M1400 (Angle)
H
A B
D E
Dimensions
Valve Size Globe 150# A in. 3 4 6 8 10 12 mm 80 100 150 200 250 300 in. 12 15 20 2538 2934 34 mm 305 381 508 645 756 864 in. 1314 1558 21 2638 3118 3512 Globe 300# B mm 337 397 533 670 791 902 in. 814 1058 1338 16 1718 2078 Cover To Center C mm 210 270 340 406 435 530 in. 6 712 10 1234 1478 17 Angle 150# D mm 152 191 254 324 378 432 in. 638 778 1012 1314 15916 1734 Angle 300# E mm 162 200 267 337 395 451 in. 4 5 6 8 858 1334 Angle 150# F mm 102 127 152 203 219 349 in. 438 718 878 1112 1558 1412 Angle 300# G mm 111 181 225 292 397 368 in.
12 34 34
Port Size H mm 13 19 19 25 25 25
Shipping Weights* lbs. 95 190 320 650 940 kgs. 43 86 145 295 426
mm 13 19 19 25 25 32
1 1 1
1 1 114
Standard Materials
Body & Cover: Ductile Iron ASTM A536 Coating: NSF Listed Fusion Bonded Epoxy Lined and Coated Trim: 316 Stainless Steel Elastomers: Buna-N (standard) EPDM (optional) Viton (optional) Stem, Nut & Spring: Stainless Steel
Operating Pressure
150 Flanged = 250psi (17.2 bar) 300 Flanged = 400psi (27.6 bar)
Operating Temperature
Buna-N: 160F (71C) Maximum EPDM: 300F (140C) Maximum Viton: 250F (121C) Maximum
Viton is a registered trademark of DuPont Dow Elastomers. Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
M400 / M1400 Full Port Ductile Iron Single Chamber Basic Valve with Mechanical Check Feature
Flow Data - ACV M400 (Globe) / M1400 (Angle)
Valve Size - Inches
Maximum Continuous Flow Rate Gpm (Water) Maximum Intermittent Flow Rate Gpm (Water) CV Factor GPM (Globe) CV Factor GPM (Angle)
3
485 590 100 125
4
800 1000 175 215
6
1850 2300 490 571
8
3100 4000 770 990
10
5000 6250 1200 1530
12
7000 8900 1750 2525
14
8500 10800 2125 2885
16
11100 14100 2890 3575
Estimated
Maximum continuous flow based on velocity of 20 ft. per second. Maximum intermittent flow based on velocity of 25 ft. per second. The Cv Factor of a value is the flow rate in US GPM at 60F that will cause a 1psi drop in pressure. The factors stated are based upon a fully open valve. Cv factor can be used in the following equations to determine Flow (Q) and Pressure Drop (P): Q (Flow) = CvP P (Pressure Drop) = (Q/Cv)2
10
20000
Globe
100 80 60
40 30 20
10 8 6 4 3 2
8 10
20
40
60 80 100
200
500
1000
2000
5000
10000
3
16
4
22
6
70
8
1-1/4
10
2-1/2
12
4
12 14 16
10
14
6-1/2
Valve Travel
Valve Size - Inches
Travel - Inches
3
3/4
4
1
6
1-1/2
8
2
10
2-1/2
12
3
14
3-1/2
12 14 16
Headloss
Angle
16
9-1/2
16
4
ES-ACV-M400-M1400 1219
2012 Watts