Documente Academic
Documente Profesional
Documente Cultură
SPEEDLITE
580EXII
I
I
INSTRUCTION MANUAL
I
MODE D'EMPLOI
MANUAL DE INSTRUCCIONES
Canon
SPEEDLITE
SBOEXII
I
Thank you for purchasing a Canon product.
The Canon Speedlite 580EX II is an EOS-dedicated, high-output flash
unit automatically compatible with E-TTL II, E-TTL, and TTL autoflash.
It can serve as an on-camera flash as well as a master unit or a slave
unit in a wireless, multiple-Speedlite system. It has the same dust- and
water-resistance as EOS-1 0 series cameras.
2
Contents II II 111111 II 1
2 Using Flash 13
3 Wireless Flash 33
4 Reference 47
3
Nomenclature r
Flash head/
Wireless
transmitter
Contact cover
Wireless sensor
External power
source socket
(p.49) -----~r~:
~~~. ~
Mounting foot (p.9) t ~__'y\l]
PC terminal
Contacts Bracket mounting
hole
4
Bounce angle
LCD panel
<MODE>--------
Flash model
Slave setting button I \ - <~H/~>
(p.11, 22, 24/45, 46) '\ /' High-speed sync
~~g/p~~';,7i11Uminationl
Custom Function setting \
Ir=J
~ cover (p.8)
-J--:~:~~~1~:~::::::n
button (p.6/27) BOn r~ZOOM/+z. '---Battery compartment
0 0 ~ II irJ
PILOT lock lever (p.8)
<PILOT> -----+---,~ ~OF\O~
Pilot lamp/Test firing/ \ ~ 6) rn~1
rJL <ZOOM/~>
Wireless slave pow~r'J!l~ ~) )1. Zoom button/
ON button (p.10/38) ~Ol"i(;~ Wireless selector/
~ ==~ Wireless set button
J
---7 (p.20/36, 39,40,41,42,45)
Flash exposure ... - - - - /
confirmation lamp (p.11)
Mounting foot's Power switch (p.10)
lock lever (p.9) < OFF> : Power off
<ON> : Power on
Lock-release button (p.9) < @ > Select Dial
[l] Asterisked buttons have functions which remain active for 8 sec. after you
press and let go of the button. The < :fr> illumination lasts for 12 sec.
5
LCD Panel
rr ETlrL m-~:-(lj)--;';:IBBmm~~
E-TTL (11)/ for image size
TTLautoflash
<EM>
Manual external I
I"~~..!..
L I aal.aau.aa
n,
, ...!..'.a.
I Hz
metering JT~MlJLTI 3", ~
CIII~"''Z.~
· .
1234~
".
8:§':~
I Slave ID
<M/MuLTI> S:1;-4:1~1-.-1:1~z;-:J:4• 1~8 Slave ID I
Manual flash/Multi
(Stroboscopic)
~ ..0.5
- - -~~-'_'_ • • _• • -~I~1underscore
13 18 m
0.7 1 1.. 2 3 4 6 9
1
• To illuminate the LCD panel, press the < :.t?:- > button .
• The items actually displayed depend on the current settings.
6
Getting Started and
Basic Operation
" on new
• Quick flash enables a flash to be fired before flash-ready (p.1 0).
-- • Using size-AA batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
• If you change the batteries after firing many flashes continuously, be
aware that the batteries might be hot.
[i] Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
Size-AA Ni-MH or lithium batteries can also be used.
8
Attaching to the Camera "I
9
Turning on the Power Switch ,II 11111 III 1111 111111111111111
[lJ • A test flash cannot be fired while the camera's operation timer 04 or 06
is active.
• The Speedlite's settings will be retained in memory even after the power
is turned off. To retain the Speedlite's settings after you replace the
batteries, turn off the power and replace the batteries within 1 minute.
10
Fully Automatic Flash Shooting ••"\\\1\\"\1&\"."
When you set the camera's shooting mode to < P > (Program AE) or
< 0 > (Full Auto), E-TTL II/E-TTL fully automatic flash will make it as
easy as normal AE shooting in the < P > and < 0 > modes.
[i] < ETTL > will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
e If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's ISO speed.
11
Using E-TTL II and E-TTL Autoflash in the Shooting Modes BI
Just set the camera's shooting mode to < Av > (aperture-priority AE),
<Tv> (shutter-priority AE), or <M> (manual) and you can use E-TTL 11/
E-TTL autoflash.
Select this mode when you want to set the shutter speed manually.
The camera will then automatically set the aperture matching the shutter
speed to obtain a standard exposure.
Tv
\\\ If the aperture display blinks, it means that the background exposure will
be underexposed or overexposed. Adjust the shutter speed until the
aperture display stops blinking.
Select this mode when you want to set the aperture manually.
The camera will then automatically set the shutter speed matching the
aperture to obtain a standard exposure.
If the background is dark like a night scene, a slow sync speed will be used
to obtain a standard exposure of both the main subject and background.
Standard exposure of the main subject is obtained with the flash, while a
standard exposure of the background is obtained with a slow shutter speed.
\\\ Since a slow shutter speed will be used for low-light scenes, using a
tripod is recommended.
\\\ If the shutter speed display blinks, it means that the background
exposure will be underexposed or overexposed. Adjust the aperture until
the shutter speed display stops blinking.
Select this mode if you want to set both the shutter speed and aperture
manually.
M Standard exposure of the main subject is obtained with the flash. The
exposure of the background is obtained with the shutter speed and aperture
combination you set.
\\\ If you use the < DEP > or < A·DEP > shooting mode, the result will be the same as
using the <P> (Program AE) mode.
12
Using Flash
Select <~>.
Press the < @ > button so that < ~ >
is displayed.
The <~> icon and the flash
exposure compensation amount will
blink.
Set the flash exposure
compensation amount.
~,~ Turn the < @ > dial to set the amount.
~t To cancel the flash exposure
compensation, set the amount to
"+0."
Press the < @ > button.
Flash exposure compensation will be
set.
[]] If flash exposure compensation has been set with both the Speedlite and
camera, the Speed lite's flash exposure compensation amount will override
the camera's.
lID Setting the flash exposure compensation can be limited to only the <@>
dial. (C.Fn-13 ~ p.27)
14
~ FEB ,1iI1I"1 i;;;11 11'11;;;11 lllii! 1'11,;;11 U'iliiU111 II 1I1111111~1
You can take three flash shots while automatically changing the flash
output for each shot up to ±3 stops in 1/3-stop increments (1/2-stop
increments if the camera enables only 1/2-stop increments). This is
called FEB (Flash Exposure Bracketing).
Select <~>.
Press the <@> button so that <~>
is displayed.
The < ~ > icon and bracketing
amount will blink.
III • After the three shots are taken, FEB will be cancelled automatically.
For FEB, set the camera's drive mode to single shooting. Be sure the
flash is ready before shooting .
• You can also combine FEB with flash exposure compensation and FE
lock.
[II'iI You can prevent the FEB from being cancelled automatically after the
three shots are taken. (C.Fn-03 ~ p.27)
[II'iI The FEB shooting sequence can be changed. (C.Fn-04 ~ p.27)
15
FEL: FE Lock III1III[ .. __
FE (flash exposure) lock locks the correct flash exposure setting for any
part of the scene.
With < ETTL > displayed on the LCD panel, you press the camera's
<FEL > button. If the camera does not have the <FEL > button, press the
<*> button.
Focus the subject.
o If the subject is too far away and underexposure will result, the < ~ > icon
will blink in the viewfinder. Move closer to the subject and try the FE lock
again.
If <ETTL> is not displayed on the LCD panel, FE lock cannot be set.
If the subject is too small, FE lock might not be very effective.
16
'I High-speed Sync
With high-speed sync (FP flash), the flash can synchronize with all
shutter speeds. This is convenient when you want to use aperture
priority for fill-flash portraits.
[lJ If you set a shutter speed that is the same or slower than the camera's
maximum flash sync speed, < ~H > will not be displayed in the viewfinder.
With high-speed sync, the faster the shutter speed, the shorter the
effective flash range will become. Check the LCD panel for the effective
flash range.
To return to normal flash, press the <~H/~> button again. The <eB>
icon will disappear.
Stroboscopic flash cannot be set.
17
Bounce Flash IIJI.llIlIIIlIll.1I111111111II11II11111111111111111• •111111111111111_1.'
By pointing the flash head toward a wall or ceiling, the flash will bounce
off the surface before illuminating the subject. This can soften shadows
behind the subject for a more natural-looking shot. This is called bounce
flash.
4) • If the wall or ceiling is too far away, the bounced flash might be too weak
and result in underexposure.
The wall or ceiling should be a plain, white color for high reflectance. If
the bounce surface is not white, a color cast may result in the picture.
• After you take the shot, if the flash exposure confirmation lamp does not
light, use a larger aperture opening and try again.
18
Creating a Catchlight
With the catchlight panel, you can create a catchlight in the subject's
eyes to add life to the facial expression.
0
Point the flash head straight ahead and then upward by 90 The •
catch light will not work if you swing the flash head left or right.
For maximum catchlight effect, stay within 1.5 m/4.9 ft of the subject.
--.-
... I ;'
----=:-.::-.!:':.~:l-!.:?~ -
0.5 0.7 1 1.5 2*""3/ l'
F- 5.6
\i \\,..... 13 18 m
19
ZOO M :Setting the Flash Coverage and Using the Wide Panel
The flash coverage can be set to match the lens focal length from
24mm to 105mm. The flash coverage can be set automatically or
manually. Also, with the built-in wide panel, the flash coverage can be
expanded for 14mm wide-angle lenses.
[l] If you set the flash coverage manually, make sure it covers the lens focal
length so that the picture will not have a dark periphery.
l~ If you use a commercially-available sync cord to connect the camera to
the Speedlite's PC terminal, set the flash zoom manually.
[l] The flash coverage will not be compatible with the EF15mm f/2.8 Fisheye
lens.
If you use bounce flash with the wide panel in place, the entire display on
the LCD panel will blink as a warning. Since the subject will be
illuminated by both the bounce flash and direct flash, it will look
unnatural.
Pull out the wide panel gently. Using excessive force may detach the
wide panel.
20
Auto Zoom for Image Size
EOS DIGITAL cameras have one of three image sizes. The lens'
effective focal length will differ depending on the camera's image size.
The Speed lite automatically recognizes the EOS DIGITAL camera's
image size and automatically sets the flash coverage for lens focal
lengths from 24mm to 105mm.
When the Speed lite is attached to a compatible camera, <§> will
appear on the Speed lite's LCD panel.
ETTL Zoom Sam §
F- s.
-------
0.50.7 1 1.5 2 3 4 6 9 13 18 m
21
M: Man uaI FIash 1\11111111111111111111IlI1III1IlI1IlI1III1IlI1I11I11IlI1I11I111111
You can set the flash output from 1/128 power to 1/1 full power in 1/3-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure.
Zoom SDmm
Press the shutter button halfway to
II y see the effective flash range
M
displayed.
22
Metered Manual Flash Exposures
When the Speed lite is attached to an EOS-1 0 series camera, you can
set the flash level manually for closeup subjects.
[.lJ This feature works only with EX-series Speedlites with manual flash coupled
with an EOS-1D series camera.
23
MULTI: Stroboscopic FIash i~l.'l"'.lI' •• l\II'.\• •'lliIIIl
With stroboscopic flash, a rapid series of flashes is fired. It can be used
to capture multiple images of a moving subject in a single photograph.
You can set the firing frequency (number of flashes per sec. expressed
as Hz), the number of flashes, and the flash output.
24
-- To avoid overheating and deteriorating the flash head, do not use stroboscopic
flash more than 10 times in succession. After 10 times, allow the Speedlite to
rest for at least 15 min. If you try to use the stroboscopic flash more than 10
times in succession, the firing might stop automatically to protect the flash
head. If this happens, allow the Speedlite to rest for at least 15 min.
~.•
•fllash OutplJ
1/4
1
7
2
6 5
4
4
5
4
6-7
3
8-9
3
1/8 14 14 12 10 8 6 5
1/16 30 30 30 20 20 20 10
1/32 60 60 60 50 50 40 30
1/64 90 90 90 80 80 70 60
1/128 100 100 100 100 100 90 80
~
flashOlltPlI.
1/4
10
2
11
2 2 2
20-50 60 -199
2 2
1/8 4 4 4 4 4 4
1/16 8 8 8 8 8 8
1/32 20 20 20 18 16 12
1/64 50 40 40 35 30 20
1/128 70 70 60 50 40 40
If the number of flashes is displayed as - -, the maximum number of flashes will
be as shown by the table below regardless of the firing frequency.
Flash Output
Flash Count
25
~ Second-Curtain Sync ,11111111 11111111 II I III II
With a slow shutter speed, you can create a light trail following the
subject. The flash fires right before the shutter closes.
Custom
Reference
Function Function Settings & Description
page
No.
Meters (m)
C.Fn-OO Distance indicator display
Feet (ft)
Enabled
C.Fn-01 Auto power off p.10
Disabled
Enabled (Depth-of-field preview
button)
C. Fn-02 Modeling flash Enabled (Test firing button) p.44
Enabled (with both buttons)
Disabled
Enabled
C.Fn-03 FEB auto cancel
Disabled
p.15
o
C.Fn-04 FEB sequence
27
Hold down the <:,C?:-JC.Fn> button
Fn []: [] until <CIiD> is displayed.
28
C.Fn-02-3: Convenient when you want to check the depth of field. (p.44)
C.Fn-12: If an external power source is used, the flash recycling is
powered concurrently by the internal batteries and external
power source. In this case, when the internal batteries
become exhausted first, shooting might not be possible. If 1
is set, the flash recycling will be powered only by the
external power source. The internal batteries will thereby
last longer. Note that even if you set it to 1, the Speed lite will
still require internal batteries for flash control.
[l] With Type-B cameras, even if C.Fn-05-0 is set, E-TTL IliE-TTL autoflash will
not work.
29
External Flash Metering '"IRlln II !I
The flash reflected off the subject is metered by an external metering
sensor in real time. When the standard flash exposure is attained, the
flash output is cutoff automatically. Auto external metering compatible
with the EOS-1 0 Mark III and manual external metering compatible with
all EOS cameras are provided.
[lJ With auto external metering, the camera's ISO speed and aperture will
be set automatically in real-time by the Speedlite.
Auto external metering will also work with flash exposure compensation
(p.14) and FEB (p.15).
30
Set the Speedlite to the camera's
aperture setting.
Press the < @ > button so the
aperture setting blinks.
Turn the <@> dial to set the
aperture, then press the <@> button.
31
Speedlite Control with the Camera's Menu Screen
If the Speedlite is attached to an EOS camera which has a Speedlite
control function, it can control the Speedlite as shown below. For the
menu operation procedure, refer to your camera's instruction manual.
U If flash exposure compensation has already been set with the Speedlite,
flash exposure compensation cannot be set with the camera. To set it with
the camera, first set the Speedlite's flash exposure compensation to zero.
III If any Speedlite Custom Functions and flash function settings other than
flash exposure compensation have been set by both the camera and
Speedlite, the latest setting will take effect.
32
Wireless Flash
III • Any flash exposure compensation, high-speed sync (FP flash), FE lock,
FEB, manual flash, and stroboscopic flash settings set with the master
unit will all be automatically transmitted to the slave units.
• Even with multiple slave units, all of them will be controlled in the same
way via wireless.
• A 580EX II set as a slave unit can also be controlled by wireless by
Speedlite Transmitter ST-E2 (optional).
• Hereinafter, the "master unit" will refer to a 580EX 1\ attached to the
camera, and a "slave unit" will be a wireless 580EX II.
34
Multi-Speedlite, Wireless Lighting Configurations
You can create two or three slave groups and set the flash ratio for E-
TTL II autoflash shooting (p.41 - 45).
Wireless flash with two slave groups (p.41)
Indoors
~B
8m (26.2ft.) 12m (39.4ft.)
Indoors
~B
8m (26.2ft.) 12m (39.4ft.)
35
Wi reless 5 etti n9s 1.\\\'\'\"""'11'.'\"""\I\\\II\1\\I\""\ll1\"\""'\""IlIill1l
You can switch between normal flash and wireless flash. For normal
shooting, be sure to set the wireless setting to OFF.
36
Fully Automatic Wireless Flash
This method has all the Speedlites fire at the same flash output with E-
TTL II autoflash controlling the total flash output.
37
Check the flash operation .
• Press the master unit's test firing
button.
tl ' The slave unit will fire. If the flash
does not fire, adjust the slave unit's
angle toward the master unit and
distance from the master unit.
Set the camera and shoot.
.' Set the camera in the same way as
with normal flash shooting.
15m (49.2ft.)
• Use the mini stand (tripod socket provided) to prop up the slave unit.
\1\ Use the bounce feature to swing the slave unit so that its wireless
38
[]] • The Speedlite's zoom setting will be set automatically to 24mm. It is possible to
change the master unit's zoom setting. However, note that the master unit
transmits wireless signals to the slave unit(s} with the preflash. Therefore, the
flash coverage must cover the slave unit's position. If you change the master
unit's zoom setting, be sure to test the wireless flash operation before shooting.
• If the slave unit's auto power off takes effect, press the master unit's test
firing button to turn on the slave unit.
A test flash cannot be fired while the camera's operation timer 04 or 06 is active.
[lID The slave unit's auto power off time can be changed. (C.Fn-10 --+ p.27)
[lID The time during which the slave unit's auto power off can be canceled by
the master unit can be changed. (C.Fn-11 --+ p.27)
[lJ Even if you disable the master unit's flash firing, it will still fire a preflash to
transmit wireless signals.
39
Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set with the master
unit will also be automatically set in the slave units. Thus, you need not
operate the slave unit(s). Wireless flash with the following settings can
be done in the same way as with normal flash shooting.
[i] With FE lock, if even one Speedlite will result in underexposure, the < ~ >
icon will blink in the viewfinder. Open the aperture more or move the slave
unit closer to the subject.
40
Flash Ratio with E-TTL II
With one master unit and one slave unit or two slave groups, you can
set the flash ratio for E- TTL II autoflash shooting.
The example below has two slave units and the master unit disabled
from firing.
Indoors
12m (39.4ft.)
41
Set the slave 10.
• Press the < @ > button.
~, Slave 10 <A> will be set.
• For the other slave unit, do steps 1
and 2, turn the < @> dial to select
< B >, then press the < @ > button.
• Slave 10 <B> will be set.
[lJ With the EOS ELAN II/ELAN II E/SO/SOE, EOS REBEL G/SOON, EOS IX,
EOS IX Lite/IX?, EOS REBEL 2000/300, and REBEL XS N/ REBEL G 11/
EOS 3000N/66, the flash ratio cannot be set with multiple Speedlites.
42
[l] • The flash ratio range of 8: 1 - 1:1 - 1:8 is equivalent to 3: 1 - 1: 1 - 1:3 in
stops (1/2-stop increments).
• The flash ratio under the • mark is shown in parentheses below the scale.
-------------_......
8:1 • 4:1 • 2:1 • 1:1 • 1:2 • 1:4 • 1:8
(5.6:1) (2.8:1) (1.4:1) (1:1.4) (1:2.8) (1:5.6)
Indoors
12m (39.4ft.)
You can have slave groups A and B and also add slave group C. You can use
slave groups A and B to obtain the standard flash exposure of the subject,
and slave group C to illuminate the background to eliminate shadows.
43
Set the master unit and shoot.
Follow "Setting the Master Unit and
Shooting" on page 42. In step 4,
select <A: B C>.
o If < IIlmmJI A: B> is set, the slave unit in slave group < C> will not fire.
If you point the slave unit in slave group < C > toward the subject, the
subject will be overexposed.
Modeling Flash
If the camera has a depth-of-field preview button, pressing it will fire the
flash continuously for 1 sec. This is called the modeling flash.
It enables you to see the shadow effects on the subject and the lighting
balance. You can fire the modeling flash for both wireless and normal
flash shooting.
o Do not fire the modeling flash more than 10 consecutive times. If you
fire the modeling flash 10 consecutive times, allow the Speedlite to
rest for at least 10 min. to avoid overheating and deteriorating the flash
head.
~ The modeling flash cannot be fired with the EOS REBEL 2000/300 and
Type-B cameras (p.2).
iii
10 =A 10 =A 10 =A
slave units will be controlled as if they
were one Speed lite in slave group A.
44
Setting the Flash Output for Each Slave
With manual flash and multiple Speed lites, you can set a different flash
output for each slave unit.
All settings are done with the master unit.
45
Setting Manual Flash and Stroboscopic Flash with the Slave 11
Manual flash or stroboscopic flash can be set manually with the slave
unit. As with studio flash units, you can set the flash output individually
with the slave units for wireless or manual flash.
Manual Flash
IlaZoom 2Ymm • Hold down the <MODE> button for 2
,I;, 1/ 16 sec. or more.
-,~,- Z~~1EmII ~ <M> will blink.
• Set the manual flash output (p.22).
Stroboscopic Flash
IlaZoom 2Ymm • Hold down the <MOD E> button for
1/128 15- 'lOHz 2 sec. or more.
....
-MUlTI-
'"
I
I
'"
11:>."
.... z~ I, IEmII .. <M> will blink.
• Press the <MODE> button again
and <MULTI> will blink.
• Set the stroboscopic flash (p.24).
46
Reference
580EX II System 48
Troubleshooting Guide......................................... 50
Specifications....................................................... 52
Using a Type-B Camera....................................... 55
O)D
o
® .....-----------1
8J1I1I/~1I/~
"'.. -~--- ..
8
---'---:---'----1
48
About Color Temperature Information Transmission
When the flash fires, the color temperature information is transmitted to
the EOS DIGITAL camera. This feature optimizes the flash picture's
white balance. When the camera's white balance is set to < m!i!l3 > or
< ~ >, it will work automatically.
To see if this feature works with your camera, see "White Balance"
under "Specifications" in your camera's instruction manual.
49
Troubleshooting Guide II III I J
If there is a problem, refer to this Troubleshooting Guide.
50
Auto zoom does not work.
• The Speed lite is -not attached securely to the camera.
• ' Attach the Speed lite's mounting foot securely to the camera. (p.9)
- Exposure Control
Exposure control system: E-TTL II/E-TTL/TTL autoflash, auto/manual external
metering, manual flash
Effective flash range: Normal flash: Approx. 0.5 - 30 m I 1.6 - 98.4 ft.
(With EF50mm f/1.4 lens Quick flash: 0.5 - 7.5 m I 1.6 - 24.6 ft. (min), 0.5 - 21 m I 1.6 -
at ISO 100) 68.9 ft. (max)
High-speed sync: 0.5 - 15 m I 1.6 - 49.2 ft. (1/250 sec.)
Flash exposure
compensation: Manual, FEB: ±3 stops in 1/3-stop increments (Manual and
FEB can be combined)
FE lock: With <FEL> button or <*> button
High-speed sync: Provided
Stroboscopic flash: Provided (1 - 199 Hz)
Flash exposure
confirmation: Pilot lamp lights
52
• Wireless Flash
Transmission method: Optical pulse
Channels: 4
Wireless options: OFF, Master, and Slave
Transmission range (Approx.):
Indoors: 12 - 15 m /39.4 - 49.2 ft.,
Outdoors: 8 - 10m /26.2 - 32.8 ft.
Master unit reception angle: ±40° horizontal, ±30° vertical
Controllable slave groups: 3 (A, B, and C)
Flash ratio control: 1:8 - 1:1 - 8:1 in 1/2-stop increments
Slave-ready indicator: AF-assist beam blinks
Modeling flash: Fired with camera's depth-of-field preview button
• Power Source
Internal power: Four size-AA alkaline batteries
* Size-AA Ni-MH and lithium batteries also usable
Battery life
(Approx. flash count): 100 - 700 flashes (with size-AA alkaline batteries)
Wireless transmissions: Approx. 1500 transmissions (With master unit firing disabled
and size-AA alkaline batteries)
Power saving: Power off after certain period of idle operation (Approx. 1.5 min.
to 15 min.) (60 min. if set as slave)
External power: Compact Battery Pack CP-E4
• Dimensions
(W x H x D): 76 x 137 x 117 mm / 3.0 x 5.4 x 4.6 in.
(excluding dust- and water-resistant adapter)
53
Guide No. (at ISO 100, in meters/feet)
Manual Flash
Flash Coverage (rnrn)
Flash Output
14 24 28 35 50 70 80 105
15/ 28/ 30/ 36/ 42/ 50/ 53/ 58/
49.2 91.9 98.4 118.1 137.8 164 173.9 190.3
10.6/ 19.8/ 21.2/ 25.5/ 29.7/ 35.4/ 37.5/ 41/
34.8 65 69.6 83.7 97.4 116.1 123 134.5
7.5/ 14/ 15/ 18/ 21/ 25/ 26.5/ 29/
24.6 45.9 49.2 59.1 68.9 82 86.9 95.1
5.3/ 9.9/ 10.6/ 12.7/ 14.8/ 17.7/ 18.7/ 20.5/
17.4 32.5 34.8 41.7 48.6 58.1 61.4 67.3
3.8/ 7/ 7.5/ 9/ 10.5/ 12.5/ 13.3/ 14.5/
12.5 23 24.6 29.5 34.4 41 43.6 47.6
2.7/ 4.9/ 5.3/ 6.4/ 7.4/ 8.8/ 9.4/ 10.3/
8.9 16.1 17.4 21 24.3 28.9 30.8 33.8
1.9/ 3.5/ 3.8/ 4.5/ 5.3/ 6.3/ 6.6/ 7.3/
6.2 11.5 12.5 14.8 17.4 20.7 21.7 24
1.3/ 2.5/ 2.7/ 3.2/ 3.7/ 4.4/ 4.7/ 5.1/
4.3 8.2 8.9 10.5 12.1 14.4 15.4 16.7
54
Using a Type-B Camera 110111.111.11•.•
11.1111111. . . . . .I.II.IIII.U.1. ;
If you use the 580EX II with a Type-B camera (TTL autoflash camera),
note the available features and restrictions below.
When a Type-B camera is used with the 580EX II set to autoflash,
<TTL> will be displayed on the Speedlite's LCD panel. (With a Type-A
camera, <ETTL> will be displayed.)
55
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made,
you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
56
The apparatus shall not be exposed to dripping or splashing.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
Dry batteries shall not be subjected to charging.
C
This mark indicates that the product complies with Australia's EMC
regulations.
-
your household waste, according to the WEEE Directive (2002/96/
EC) and your national law. This product should be handed over to
a designated collection point, e.g., on an authorized one-for-one
basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic
equipment (EEE). Improper handling of this type of waste could
have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation in the
correct disposal of this product will contribute to the effective usage
of natural resources. For more information about where you can
drop off your waste equipment for recycling, please contact your
local city office, waste authority, approved WEEE scheme or your
household waste disposal service. For more information regarding
return and recycling of WEEE products, please visit www.canon-
europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
57
Canon
PRINTED IN JAPAN
IMPRIME AU JAPON
CT1-7768-000 © CANON INC. 2007 IMPRESO EN JAPON
Ca......ol8tl ~.. '..
CANON PHOTOGRAPHIC PRODUCTS
INTERNATIONAL SERVICE NETWORK
(--- ) - Country & Area Code PORTUGAL Ef) SEQUE S.A. Praca da Alegria. 58-2, 1269-149 Lisboa Phone: (351) 021-3242830
iii F:lf&ELill18i £I SLOVENIA Ef) 3A AUDIO VIDEO Servis http://www.3a-servis.si Phone: (386) 01-5461000
REGIONAL CANON MARKETING JAPAN INC. Phone: (81) 03-3455-9353 SPAIN Ef) Canon Espana, S.A. Joaquin Costa, 41 • 28002 Madrid Phone: (34) 091-5384500
HEADQUARTERS SWEDEN Ef) Canon Nordic Regional Competence Center http://www.canon.se Phone: 08-7448620
SWITZERLAND Ef) Canon Schweiz AG http://www.canon.ch Phone: 0848-833-838
UNITED KINGDOM Ef) Canon UK Regional Competence Center http://www.canon.co.uk Phone: 08-705-143723
jiilijtUi,Ji','i',J'ffi;,t.i,$t16·;·i"i CZECH REP. Ef) Canon CZ S.R.O. 160 00 Praha 6 Phone: (420) 02-25280-111
HONG KONG Ef) Canon HongKong Co. Ltd. - Domestic Sales Office
Ef) AWH service Milesovska 1, 130 00 Praha 3 Phone: (420) 02-22721-525
e Kowloon Depot: Phone: (852) 2170-2888 POLAND Ef) Canon Polska SP.Z.O.O. http://www.canon.pl Phone: (48) 022-572-30-00
18/F The Metropolis Tower, 10 Metropolis Drive Hunghom, Kowloon Hong Kong Fax: (852) 2428-3963 Ef) CSI Foto Video ul. Zytnia 15, 01-014 Warszawa Phone: (48) 022-862-41-38
e HongKong Depot: Phone: (852) 2170-2888 SLOVAKIA Ef) Pro Laika Radlinskeho 26, 811 07 Bratislava Phone: (421) 02-5441-4880
10/F Beverly House, 93-107 Lockhart Rd, Wan Chai, Hong Kong Fax: (852) 2428-3963 CYPRUS Ef) NT. Kakoyiannis/Paroutis Electronics Ltd. 115 Omonias Avenue Paroutis Building. Phone: (357) 25-384306
3045 Limassol (357) 25-568274
INDONESIA Ef) Pt. INTER-DELTA Tbk Phone: (62) 021-651-1533
IRAN Ef) Aphomar Co. Ltd. 127, South Sohrevardi Avenue Phone: (98) 021-8752442
JI. Gaya Motor Barat, Sunter II Jakarta 14330 Fax: (62) 021-651-0472
P.O. Box 11365/1167, Tehran
KOREA Ef) Canon Korea Consumer Imaging Inc. Canon Support Center Phone: (82) 02-2017-8600
ISRAEL Ef) Karat Israel Ltd. 50 Anilevitch St, Tel Aviv 67060 Phone: (972) 03-6888525
2F Samwhan Artnubeau III, 209 Nonhyun 2 Dong, Kangnam-gu, Seoul Fax: (82) 02-2017-8796
MALAYSIA Ef) Canon Marketing (Malaysia) Sdn. Bhd. Phone: (60) 03-7845-0055 SAUDI ARABIA Ef) AIQuraishi Leisure Services PO. Box 1796. Jeddah 21441 Phone: (966) 02-6970779/
6970652
Block D, Peremba Square, Saujana Resort, Section U2, 40150 Shah Alam, Fax: (60) 03-7844-6044
Selangor Darul Ehsan Malaysia SOUTH AFRICA Ef) Canon South Africa. P.O. Box 1782 Halfway House 1685 Phone: (27) 011-2667162
Ef) Canon Marketing (Philippines) Inc. Phone: (63) 02-812-6047 Johannesburg
PHILIPPINES
Marvin Plaza Building. 2153 Don Chino Roces Ave. Makati City, Metro Manila Fax: (63) 02-812-0067 jiilillii.iii.'ii.iaffi;,i.i,hq.i"p:;"
SINGAPORE Ef) Canon Singapore Pte. Ltd. Phone: (65) 6799-8888
REGIONAL Ef) CANON AUSTRALIA PTY. LTD. Phone: 13-13-83-
1 HarbourFront Avenue #04-01 Keppel Bay Tower Singapore 098632 Fax: (65) 6799-8882
HEADQUARTERS -Within Australia only
TAIWAN Ef) Rainbow Photo & Image Equipment Co. Ltd. Phone: (886) 02-2537-1172
(61) 02-9805-2555
No. 20 Chiling Road, Taipei 10424. Taiwan Fax: (886) 02-2571-7171
*For service center location, please contact the phone number above. Fax: (61) 02-9888-3314
THAILAND Ef) Canon Marketing (Thailand) Co.Ltd Phone: (66) 02-344-9999
10th Floor, Bangkok City Tower, 179/34-45 South Sathorn Road. Bangkok 10120 Fax: (66) 02-344-9910
NEW ZEALAND Ef) Canon New Zealand Ltd. Phone: (64) 09-489-0470
lil~lii#l·"'i'ti.~".i:t·'~tl#l·jl", nilill"·"'·"'·"it4%hffi·,i.i,';.i"i Akoranga Business Park, Akoranga Drive Northcote. Auckland. New Zealand
REGIONAL CANON U.S.A., INC. Phone: 1-800-828-4040
'~(·)~eMl~'~;::I~i;:j::l·b
HEADQUARTERS -Within US only
-For service center location, please visit our website or contact the phone number above. -Service facilities listed below are not "International Warranty Members"
They do not accept any warranty repair but may assist you when the repair charge is acceptable.
fiilijtl",';',''',''ffi;,;··,·ffi; ASIA Phone: (673) 02-653001
REGIONAL CANON CANADA INC., Phone: 1-800-828-4040 • Interhouse Company
-Within Canada only BRUNEI NO.5 & 6, Bunut Jaya Complex, Simpang 574,
HEADQUARTERS
Krn 71/4, Jalan Tutong. Bandar Seri Begawan 2690, Brunei Darussalam
-For service center location. please visit our website or contact the phone number above.
CAMBODIA e Royal Cambodia Co., Ltd Phone: (855) 023-426414
lij#l~ •• ·'tj.~"i.)I •• :',!&I#I-j(", n;liIJi','i:,'XJ,J,q:;,i.i"m;;'hi"iY;'ffii;.i"i 6th Floor, Royal Group Building, 246 Preah Monivong Boulevard. Phnom Penh Fax: (855) 023-426014
CHINA • Canon(China)Co., Ltd. Phone: (86) 010-9517-7178
REGIONAL CANON LATIN AMERICA, INC. Phone: 1-305-260-7400
15F Jinbao Building No. 89 Jinbao Street, Dongcheng District, Beijing 100005. China
HEADQUARTERS (Except Mexico)
INDIA • Canon India Pte. Ltd. Phone: (91)-012-45160000
-For service center location, please visit our website or contact the phone number above.
2nd Floor, Tower A & B Cyber Greens, DLF Phase III Gurgaon-122 002. Haryana. India Fax: (91 )-012-45160011
nililJii.i'i.i'paffi;';.;';A.",h"i i MYANMAR • Accel International Co., Ltd. Phone: (95) 01-202-092
Phone: 01-800-710-7168- Level 6. FJV Commercial Centre, 422-426 Strand Road, Botataung, Township, Yangon Fax: (95) 01-202-079
REGIONAL CANON MEXICANA, S.DE R.L. DE C.V.
PAKISTAN • Global Systems Phone: (92) 021-438-9581
HEADQUARTERS Manuel Avila Camacho No. 138, PB Y pisos 15,16 Y 17 Col. Lornas de -Within Mexico only
39-C/1, Block-6, P.E.C.H.S Off: Shahrah-e- Faisal, behind Jason Trade Centre, Karachi 75400 Fax: (92) 021-438-9589
Chapultepec Delegacion Miguel Hidalgo, C.P 11000 Mexico, D.F. (52) 052-494-905
SRI LANKA e Homebase(Pvt.)Limited Phone: (94) 01-12437797
-For service center location, please contact the phone number above or send an e-mail to: Fax: (52) 052-494-944
NO.85 Braybrooke Place, Colombo 02, Sri Lanka Fax: (94) 01-12448980
canonmx_soporte@cusa. canon. com
NEPAL e Primax International Inc. Phone: (977) 01-422-4079
jiili1thi.iXi.iXi.iaffi;,i.i,64';··illiii!1lUi 3rd Floor, Maitry Bhavan. New Road, Kathmandu, Nepal Fax: (977) 01-422-9358
INDONESIA e PT Datascrip Phone: (62) 021-424-4204
REGIONAL CANON EUROPA N. V Phone: (31) 020-545-8545
JI. Angkasa no 18 BD,Jakarta, Indonesia Fax: (62) 021-424-7017
HEADQUARTERS P.O. Box 2262, Bovenkerkerweg 59-61 1180 EG Amstelveen, The Netherlands Fax: (31) 020-545-8211
-For general Inquiry only. For repair, please contact one of service center listed below.
EUROPE I MIDDLE EAST I AFRICA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-Within Local oniy for non-Country & Area Code No.
CIS e Canon Representative Office Kosmodamianskaya nab. 52. Building 3, Phone: (7) 095-258600
5th Floor 113054 Moscow
AUSTRIA Ef) Canon Ges.m.b.H http://www.canon.at Phone: 0810-081009
HUNGARY Somogy 1. Bela u. 10, 1085 Budapest Phone: (36) 01-2668085
BELGIUM Ef) Canon Belgium N.V. / S.A. http://www.canon.be Phone: 070-300-012 • Camera Kft
MALTA • P. Cutajar http://www.pcutajar.com.mt Phone: (356) 448466
CANARY ISLANDS Ef) Chellsons S.A. Islands 57, La Naval-Las Palmas Phone: (34) 28-470008
KUWAIT • Naser Mohammed, AI Sayer Comm.Co. PO. Box 974 Safat 13008 Phone: (965) 2-44810315
Ef) Chell sons S.A. 23, Irneldo Seris-Sta Cruz de Tenerife Phone: (34) 28-470008
OMAN eGENETCO PO. Box 3139. Ruwi 112 Phone: (968) 706153
DENMARK Ef) Canon Denmark http://www.canon.dk Phone: 70-2055-15
UAE • Khoory Electronics PO.Box 284 Dubai Phone: (971) 04-3534168
FINLAND Ef) Canon Oy http://www.canon.fi Phone: 020-366-466
LEBANON • Image System sal 460 Corniche AI-Nahr, Beirut Phone: (961) 01-582-000
FRANCE Ef) Canon France Regional Competence Center http://www.canon.fr Phone: 0825-002-923
ESTONIA • AS KTK Overall http://www.canon.ee Phone: (372) 630-0530
GERMANY Ef) Canon Germany Regional Competence Center http://www.canon.de Phone: 0180-500-6022
LATVIA • Canon North-East Oy http://www.canon.lv Phone: (371) 720-4444
GREECE Ef) Intersys SA http://www.intersys.gr Phone: (30) 0210-955-4000
LITHUANIA • Canon North-East Oy http://www.canon.lt Phone: (370) 8700-555-78
ICELAND Ef) Beco ehf Langholtsvegur 84. 104 Reykjavik Phone: (354) 533-3411
IRELAND Ef) Canon Ireland Ltd. http://www.canon.ie Phone: (353) 01890-200-563
ITALY Ef) Canon Italy Regional Competence Center http://www.canon.it Phone: 848-800-519
LUXEMBOURG Ef) Canon Luxembourg S.A. http://www.canon.lu Phone: 27-302-054
THE NETHERLANDS Ef) Canon Nederland N.V http://www.canon.nl Phone: 0900-202-2915
NORWAY Ef) Canon Norge A1S http://www.canon.no Phone: 226-29321
Complete this card at time of sale. A remplir au moment de I'achat L1ene esta tarjeta en el momento de la venta.
CUSTOMER
D D D D ~
CliENTE
NAME ADDRESS
Nom Adresse
D D D D NOMBRE
CITY/STATE
DIRECCION
ZIP PHONE
_
~\ILelt;g~~~~ADO---------------g~ci'I&~~6sTAL- i~t~~~~o _
m
'·TE~>
~~~
~m~ CANON U.S.A., INC. CANON U.K.RCC CANON NEW ZEALAND LTD. CANON LATIN AMERICA, INC.
<. A"r# CANON CANADA., INC. CANON AUSTRALIA PTY LTD. CANON SALES CO. JAPAN CANON MEXICANA
CITY
VILLE
CIUDAD
THIS WARRANTY CARD AND YOUR BILL OF SALE MUST BE
PRESENTED FOR WARRANTY SERVICE. DEALER'S NAME & ADDRESS
MARCHAND NOM & ADRESSE
POSTAL CODE CETTE CARTE DE GARANTIE ET VOTRE PREUVE D·ACHAT DOIVENT NOMBRE Y DIRECCION DEL DISTRIBUIDOR
PROVINCE CODE POSTAL ~TRE PRESENTES POUR RECEVOIR LE SERVICE SOUS GARANTIE.
PROVINCIA C6DIGO POSTAL
PRESENTE ESTA TARJETA DE GARANTIA Y LA BOLETA DE COMPRA
PARA PODER RECIBIR EL SERVICIO DE GARANTIA.
~t~fo'r~IST~~~.;;.~:~=I~~~I~~,rA~=
~R~~~~~~8':,.~-rt~Nb~~~~~~~~~AaE~~deD~~~~~ncla,
Canon Latin America. Inc. Miami 703 Waterlord Way Suite 400, Miami, FL 33126 U.S.A.
odepals a pals. Canon 8aJes Co. Japan 2-16-6, Kohnen, Minato-ku, Tokyo 108-8011, Japan
"Garantla limitada significa que eI conlenido de esta garanlla se encuenlra Iimitado a los lerminos y condiciones mencionados m4s arriba.