Documente Academic
Documente Profesional
Documente Cultură
Not all machines are made the same. Some of the settings below wont be present on all models.
Counter 2 Set this to 109 (If CNT-SW is done first this should already be done)
Dust Detection Level Service Mode > Copier > Option > IMG RDR o DFDST L1, DFDST- L2, DF2DFSTL1, DFDSTL2 Set all to 0
CDS Country Select Service Mode > Copier > Function Install > CDS-CTL o Set to CA To scroll through the different regions press the +/-
Allow Firmware Update from UGW Service Mode > Copier > Option >FNC-SW o Page 3 Set CDS-UGW to 1
Adjust Feeder Paper Size Service Mode > Feeder > Function o Select one of the follow/but perform on all
TRY-A4, TRY-A5, TRY-LTR, TRY-LTRR Move the Document Tray guide to the selected option (There is a sticker on the document feeder that will show where to slide the guide) o Press OK It is completed once the screen says OK!
Adjustment of ITB Steering See N08-021-2 related to this service mode >> Double Click mouse here
Service Mode > Copier > Function > Misc P o Page 2 ITB-INIT Initialize
Related Service Mode o Service Mode > Copier > Display > Misc ITB POS
Waste Toner Full Warning (Only applies to the C70XX C90XX color series machines) Service Mode > Adjust > Misc > WT-FL-LM o Set 3
Remaining Toner Settings/Registration> Preferences>Display Settings> o Display Remaining Toner Memory Media Settings/Registration>Preferences>Display Settings>Store Location o Memory Media Turn On Turn On
Register Shortcuts
-
Settings/Registration>Copy>Image Runner Logo>Register Options Shortcuts o Remove Density and Replace with Job Build o Add different size originals
Adjust Clock Settings/Registration>Preferences>Timer/Energy Settings o Date Time Settings Change time zone to GMT 0700
Settings/Registration>Preferences> Timer/Energy Settings o Sleep mode exit time settings Set to 7am (This setting is in a 24 hour clock mode so enter 0700)
Tray Home Position (Applies only when a Finisher is present) Settings/Registration>Function Settings>Common> Paper Output settings o Output tray settings Tray home position (Located top right of screen) Job Secure Time Settings/Registration>Function Settings>Printer>Printer Settings>Custom Settings o Job Securing Time (Page 2) Set to 12 hours Set to off
Data Size Settings/Registration>Function Settings>Send>Email/I-Fax Settings o Maximum Data Size For Sending Send Shortcuts
-
Set to 10mb
Settings/Registration>Function Settings>Send>Common Settings>Register Option Shortcuts o Replace 2 sided copy with File name o Replace Different Size Originals with Subject/Message
Auto Delete Mailboxes Settings/Registration>Function Settings>Store/Access Files>Mailbox Settings>Settings for all Mail Boxes o Time until File Auto Delete Set to 0 = Off
Hold (Applies only to C7000, C9000, 8000 advance series) Settings/Registration>Function Settings>Hold> o Time until hold job Auto delete Set to 12 hours
Timing to Raise(Applies only to C5045,C5051,C7000,C9000,C6000,C8000 advance series) Settings/Registration>Function Settings>Common>Scan Setting o Timing to Raise Feeder Tray When panel touched
o Feeder Jam Recovery Method Auto Offline Settings/Registration>Function Settings>Common>Scan Setting o Auto Offline Turn on From Stopped original
Suspended Job Timeout Settings/Registration>Function Settings>Common>Paper Feed Settings o Suspended Job Timeout Turn on and set to 5 mins
Scanner/Fax/I-Fax off Screen Push Image Runner logo on top right hand of screen o Main Menu button display settings Add a blank to #8 Move fax/ifax and Scanner down so they appear on second page
Shortcut Top Right Push Image Runner logo on top right hand of screen o Top Settings Button Select Shortcut 1 and press Copy Select Shortcut 2 and press Fax
Turn off Show All Push Image Runner logo on top right hand of screen o Other main menu settings Display Show all Turn off
Yes
Black Press ok
Collate plus Offset (Applies only when a Finisher is present) Main Menu>Copy o Select Finishing Highlight Collate and Offset Press ok