Documente Academic
Documente Profesional
Documente Cultură
Press on the arming and Disarming button at th after 2S, the LED will flash one,two,three,then
Item No.:SH-QD095B
Dimention :62*32* 12MM Frequency:Fixing Frequency Frequency range:313MHZ/433MHZ. MOQ:500PCS. PRICE:FOB XIAMEN $4.2/PC
<4>Copy the the second code code of your original remote control of 4 buttons <5>Resume the previous code
Take our Double duplicator in the left hand, the original remote in the right hand. Make them close to each other. Sliding the button down and Press on the arming
If you delete the code of our super duplicator carelessly, Press on the Muting and searching button at the same time, after 2S ,the LED will flash one,two,three,finally flash fast, then the previous code of our super duplicator have
button of our double duplicator until the light flash 2 times,still keep press on it,at the same time, you begin to press on the arming button of your original remote.Finally you will see the LED light of our super duplicator flashing fast,which mean the code of arming button of your original remote control have been copied successfully,the other three buttons need to follow the same operations.
DOUBLE DUPLICATOR CAN COPY 8 REMOTE CONTROL OF 1 BUTTON ,4 REMOTE CONTROL OF 2 BUTTONS ,2 REMOT CONTROL OF 4 BUTTONS AT THE SAME FREQUENCY .
<5>When any of the bottons keeping be pressed for a long time,the remote will stop working automatically after 15S to save power. <6> If you find it hard to copy, please replace a new battery of your original remotes.
Put on the hat on the pins,the frequency range is 270-390MHZ. Put off the hat,the frequency range is 390-450MHZ. Using a special alignment pen( non-metallic) to adjust the frequency to get the exact frequecny you need. When you adjust the frequency,you need a frequency scanner to check the adjusted frequency to make sure the frequency of our remote duplicator same as your original remote control.
he arming and Disarming button at the same time he LED will flash one,two,three,then keep unmoved,press the disarming three times
<3>Copy the the first code code of your original remote control of 4 buttons
e same time,
Take our Double duplicator in the left hand, the original remote in the right hand. Make them close to each other. Sliding the button up and Press on the arming
button of our double duplicator until the light flash 2 times,still keep press on it,at the same time, you begin to press on the arming button of your original remote.Finally you will see the LED light of our super duplicator flashing fast,which mean the code of arming button of your original remote control have been copied successfully,the other three buttons need to follow the same operations.