Sunteți pe pagina 1din 2

BTS(C) VI (S) - 10 048 - G

B. Tech Degree VI Semester (Supplementary) Examination

September 2010
EE 606 ELECTRICAL MACHINES III
(2006 Scheme)

Time : 3 Hours
PART A (Answer all questions)

Maximum Marks : 100

(8 x 5 ---40) I.

(a)

(0

Explain the difference between squirrel cage and slip ring induction motor. Draw the equivalent circuit of a 3 phase induction motor. Describe deep bar cage rotor motor. Discuss about the torque - speed curve of double cage induction motor. Write short-note on synchronous induction motor. Explain cascade arrangement for controlling speed of 3 phase induction motor. Explain the function of commutator as frequency changer. Explain the operation of single phase a.c. series motor.

PART B

(4 x 15 = 60)

[I.

Draw the circle diagram for a 5 HP, 200V, 50Hz, 4 pole 3 0 star connected induction motor from the following data 200V, 5A, 350W 100V, 26A, 1700W Rotor copper loss at stand still = half of the total copper loss (c) Estimate the full load torque, current, power factor and speed.
OR

(15)

A 3-phase, 4 pole, 50 Hz induction motor at stand still has 120V induced across its star connected terminals. One rotor resistance and stand still reactance per phase are 0.2 and 1 C2 respectively. Calculate the speed when the rotor is drawing a current of 16A at a particular load. Also calculate the speed at which the torque is maximum and corresponding value of rotor input.

(15)

A 12 KW, 3 0 , 6 pole, 50Hz, 400V, delta connected induction motor runs at 960 rpm on full load. If it takes 85A on direct starting, find the ratio of the starting torque to full load torque with a star-delta starter. Full load efficiency and power factor are 88% (15) and 0.85 respectively.
OR

(a) (b) (a) (b)

Explain auto transformer method of starting of a squirrel cage induction motor with neat diagram. Explain cogging and crawling of induction motor. With phasor diagram explain the working of induction generator. Explain the use of SCR for the speed control of induction motor.
OR

(10) (5) (10) (5) (P.T.0)

A 4-pole induction motor and 6 pole induction motor are connected in cumulative cascade at 50 Hz supply. The frequency in the secondary circuit of the 6-pole motor is observed to be 1 Hz. Determine the slip in each machine and the combined speed of the set.

(15)

A 230V, 50Hz, 4 pole single phase induction motor has the following parameters
ri m =

2.51C2, r,' = 7.8IQ, xrri = 150.8 C, x, m = 4.6252, x21 = 4.620. Obtain the
(15) (10) (5)

(a) (b)

main winding current and power factor when the motor is running at a slip of 0.05. OR Explain the construction and working of universal motor. Explain the working of schrage motor.

***

S-ar putea să vă placă și