Documente Academic
Documente Profesional
Documente Cultură
Block Diagram
To get a variable speed from a PLC supply, we are going to introduce PLC ,Inverter drive Module and the IM.
PLC
INVERTER Drive
IM
Instructions
The Move Word is a instructions move a value from a memory location IN to a new Memory location OUT without Changing the Original value
Instructions
ENO- is a Boolean output for boxes in LAD.ENO allows you to connect boxes in series (horizontally) rather than in parallel (vertically). If the box has power flow at the EN input and the box executes without error.
Programming Concept
By giving 32,000 scaling value to the IN ( input) MOV_W instruction, we get output from OUT to Analog output AQW0. 32000 digital Value= 10 Volt 10Volts = 50 Hz 50 Hz = 1500 r.p.m
Programming Concept
By giving 16,000 scaling value to the IN ( input) MOV_W instruction, we get output from OUT to Analog output AQW0 16000 digital Value= 5 Volt 5Volts = 25 Hz 25 Hz = 750 r.p.m
Programming Concept
By giving 8,000 scaling value to the IN ( input) MOV_W instruction, we get output from OUT to Analog output AQW0 8000 digital Value= 2.5 Volt 2.5Volts = 12.5 Hz 12.5 Hz = 375 r.p.m
THANK YOU
10