Documente Academic
Documente Profesional
Documente Cultură
TERMINAL LEARNING OBJECTIVE Task: Install a processor. Condition: Given classroom instructions.
Standards: Disassembled a laptop. Installed a processor. Reassembled the laptop and tested for functionality. Completed procedure within 15 minutes.
Safety Requirements: In case of fire exit thru front door in an orderly manner, or out the window if entrance is blocked. Risk Assessment: Low
Environmental Considerations: Pick up your trash when you leave the classroom. Evaluation: There will be a timed evaluation at the end, and Checks on Learning throughout the presentation.
Remove Heatsink
Remove Heatsink
Replace Heatsink
Tighten Heatsink
Boot to BIOS.
1
Check on Learning
How many screws are removed in the back of the D620? Five
TLO SUMMARY
The basic steps to installing a processor are remove the power to the machine, disassemble the machine, install the processor, and lastly, boot to BIOS to verify system recognizes the processor. You should alwa
Check on Learning
What are the signs of a failing processor? LED lights turn on, but then system powers off. Failing CPU fan. System crashes or freezes up. What is the first step when removing a processor? Remove power. (unplug power supply and remove battery) What is the last step in this whole process? Boot to BIOS to verify system reads processor.
QUESTIONS?