Documente Academic
Documente Profesional
Documente Cultură
Crystallization- Molten magma cools, and solidifies within the Earth to produce igneous rocks. Crystallization may occur either beneath the surface or, following a volcanic eruption, at the surface. If the igneous rocks are exposed at the surface, they will undergo a process termed weathering.
Weathering is defined as the disintegration and decomposition of igneous rock at or near the surface of the Earth. The materials, or sediment that result are moved down-slope by gravity before being picked up and transported by any of a number of erosional agents- running water, glaciers, wind, or waves.
Eventually these particles and dissolved substances are deposited in the ocean, river floodplains, desert basins, swamps, and dunes. Next, the sediments undergo lithification, a term meaning conversion into rock. Sediment is usually lithified into sedimentary rock when compacted by the weight of overlying layers or when cemented as percolating groundwater fills the pores with mineral matter.
If the resulting sedimentary rock is buried deep within the Earth and involved in the dynamics of mountain building, or intruded by a mass of magma, it will be subjected to great pressures and/or intense heat. The sedimentary rock will react to the changing environment and turn into metamorphic rock. When metamorphic rock is subjected to additional pressure changes or to still higher temperatures, it will melt, creating magma, which will eventually crystallize into igneous rock.
Igneous rocks, rather than being exposed to weathering and erosion at the Earths surface may remain deeply buried. Eventually these masses may be subjected to the strong compressional forces and high temperatures associated with mountain building. When this occurs, the igneous rocks are transformed directly into metamorphic rocks.
Metamorphic and sedimentary rocks, as well as sediment, do not always remain buried. Rather, overlying layers may be stripped away, exposing the once buried rock. When this happens the material is attacked by weathering processes and turned into new raw materials for sedimentary rocks.
The materials that make up the Earth are mainly rocks (including soil, sand, silt, and dust). Rocks in turn are composed of minerals, and minerals are composed of atoms. Processes range from those that occur rapidly to those that occur slowly.
Examples of slow processes include: formation of rocks, chemical breakdown of rock to form soil (weathering), chemical cementation of sand grains together to form rocks (diagenesis), re-crystallization of rock to form a different rock (metamorphism), construction of mountain ranges (tectonism), erosion of mountain ranges.
Examples of faster processes include: beach erosion during a storm, construction of a volcanic cone, landslides (avalanches), dust storms, mud flows.
Types Of Rocks
Igneous rock is formed by the crystallization of molten magma. Sedimentary rock is formed from the weathered products of free-existing rocks that have been transported, deposited, and lithified. Metamorphic rock is formed by the alteration of pre-existing rock deep within the Earth (but still in solid state) by heat, pressure, and/or chemically active fluids.
Characteristics of Minerals
Minerals are defined as naturally occurring, inorganic crystalline solids that possess a definite chemical structure. Minerals are the building blocks of rocks.
Properties of Minerals
Crystal form: The external appearance of a mineral as determined by its internal arrangement of atoms. Luster: Luster is the appearance or quality of light reflected from the surface of a mineral. Color.
Streak: The color of a mineral in its powdered form. Hardness: The resistance a mineral offers to scratching. Cleavage: The tendency of a mineral to break along planes of weak bonding.
Mineral Groups
Minerals can be classified into groups depending upon their chemical composition.
Oxygen (O) 46.6%, Silicon (Si) 27.7%, Aluminum (Al) 8.1%, Iron (Fe) 5.0%, Calcium (Ca) 3.6%, Sodium (Na) 2.8%, Potassium (K) 2.6%, Magnesium (Mg) 2.1%, All others 1.7%.
The largest group of rock forming minerals is the silicate group. All silicate minerals contain silicon and oxygen. Some examples of silicate minerals are olivine, augite hornblende, garnet, biotite, albite, and quartz. Silicates are the most common minerals because most of the Earths crust is made of silicon and oxygen.
Non-silicate minerals are those that do not contain silicon and oxygen. There are five groups of non-silicates: oxides, sulfides, halides, carbonates and sulfates.
Oxides are minerals that form when an element combines with oxygen. Some examples of oxides are corundum, hematite, and magnetite.
Sulfides are minerals that form from compounds that contain sulfur. Some examples of sulfides are galena and pyrite.
Halides are minerals that form when certain elements combine with the Halogen Group from the periodic table. The halogen group includes chlorine, bromine, fluorine, and iodine. Some examples of halides are halite and fluorite.
Carbonates are minerals that contain a carbon atom surrounded by three oxygen atoms (carbonate ion). Some minerals that contain this ion are azurite, aragonite, and malachite.
Sulfates are minerals that contain a sulfur atom surrounded by four oxygen atoms (sulfate ion). Some minerals that contain this ion are gypsum, celestite, and barite.
Mineral Resources
Mineral resources are the Earths storehouse of useful minerals that can be recovered for use. Resources include already identified deposits from which minerals can be extracted profitably, called reserves, as well as well known deposits that are not yet recoverable under present economic conditions or technology. Deposits inferred to exist, but not yet discovered, are also considered as mineral resources.
There three principal categories for mineral uses are: rock forming, economic, gems and ornamentals. Rock forming refers to the primary function or use of some minerals. Many minerals have commercial or economic use. Some minerals are considered ore minerals (e.g. hematite iron ore), while others are common commercial products (e.g. calcite cement).
Common gemstones used in jewelry are actually minerals. Examples are diamonds, garnet, and amethyst. Large mineral specimens can also be used for decorative or ornamental purposes. Examples are pyrite (fools gold), or geodes lined with quartz or amethyst crystals.
A deposit containing only the average crustal percentage of a valuable element like gold is worthless if the cost of extracting it greatly exceeds the value of the material recovered. To be considered of value, an element must be concentrated above the level of its average crustal abundance.
Examples of minerals and their economic use: Hematite (oxides) ore of iron, Galena (sulfides) ore of lead, Gypsum (sulfates) plaster, Gold (native elements) trade and jewelry, Fluorite (halides) used in steel making, and Calcite (carbonates) Portland cement and lime.
Works Cited
1.) The Mineral Gallery http://minerals.galleries.com/default.html 2.) Minerals http://www.tulane.edu/~sanelson/geol111/m inerals.html 3.) Rock Cycle Images http://rst.gsfc.nasa.gov/Sect2/Sect2_1a.html
4.) Tarbuck, Edward J., Lutgens, Frederick K. Earth Science 8th Ed. 1997 New Jersey: Prentice Hall Inc. 5.) Image- silicon-oxygen tetrahedron http://www.msdwc.k12.in.us/msdclass/WE NJ