Documente Academic
Documente Profesional
Documente Cultură
Outline
Sun drying Advantages & disadvantages of sun drying Solar drying Solar dryers classification Prospect of solar drying Solar collectors Design calculation
2
Sun Drying
This is the most fundamental method of drying for preservation purpose It is also know as natural drying Only uses direct sunlight and wind Mostly use by smallholders/farmers, managed by single family mostly Some estates/plantations still use this method, uses large land areas Suitable for areas that receive high rate of solar insolation and with longer daytime
3
By hanging
Inside a crib
Elevated platform
4
Some of these products are preferred by consumer to be sun dried, due to better flavour/taste (proven) and even 5 appearance.
Disadvantages
Labour intensive Frequent mixing is needed Large land area is required Not efficient Pests and insects attack Rains/dews Contaminations i.e. smoke, dust, chemicals Unpredictable weather Extended drying duration Under dried product Spoilage i.e. mould
However, this method is still widely used by farmers worldwide due to cost/price issue and level of technology transfer.
Solar Drying
In view of the various disadvantages of sun drying, solar drying is used Also, due to the current trend of high fuel/energy cost, solar drying is favoured Definition of solar drying
Drying in which the temperature of the drier air has in some way been increased by the deliberate capture of solar radiation (Fuller, 1993, Solar drying of horticultural practices)
7
Solar Insolation
8 7
6 5 4
3
2
1
0
Total Horizontal Solar Insolation and Sunshine Hours for Some Developing Countries (by courtesy of Dr S. Jangam)
80 70 60
50 40 30 20
200 100 0
8. 30 9. 00 9. 30 10 .0 0 10 .3 0 11 .0 0 11 .3 0 12 .0 0 12 .3 0 1. 00 1. 30 2. 00 2. 30 3. 00 3. 30 4. 00 4. 30 5. 00 5. 30
10 0
Time of day
A Typical solar intensity plot with the temperature variation in the dryer (by courtesy of Dr S. Jangam)
9
Temperature (oC)
Classification
10
Direct type
Drying occurs primarily through the direct absorption of solar radiation by the product
Indirect type
Drying is achieved primarily by forced or natural convection, drying chamber is opaque Solar energy is absorbed by a separate collector
12
Indirect type
Drying chamber is opaque, sometimes is painted with black paint to absorb heat Shelves are usually used to hold the product In some design chimney is excluded A solar collector is used to generate warm air
13
Mixed mode
Transparent drying chamber with solar collector The floor of the solar collector can be filled with rocks painted in black as thermal storage Heat is released from the rocks to prolong drying at night time or during bad weather
14
Solar collector
Indirect type
Separate solar collector Connected to a blower to distribute the warm air Hot air is supplied to the drying chamber (not transparent)
16
Mixed mode
Greenhouse effect solar dryer, using transparent UV stabilized plastic film Auxiliary heater is used to heat up water as thermal storage Blower is used to circulate air flow
17
Disadvantages
Initial cost is high to set up Requires frequent maintenance High maintenance cost Availability of spare parts Losses in nutritional quality due to over heating i.e. vitamins Higher level of expertise is required Complicated design in some cases i.e. incorporated with heat pump system
19
Despite these difficulties, some successful examples can still be cited Education is important, to teach farmers the benefits of solar drying
20
Guidelines in Design
Metrological: solar insolation, weather pattern, rainfall etc Design: active/passive, tunnel/cabinet/tent, mixed/hybrid etc Products: moisture content, equilibrium moisture content, max allowable temperature Dryer capacity: thick bed, thin layer, shelves Solar collector: air/liquid medium, single/double pass, insulation, airflow, ducting etc Drying chamber: single bed/shelves, loading/unloading, direct/indirect, ventilation etc Construction: materials, insulation, spare parts Airflow: natural/forced, fan/ventilator/chimney etc Auxiliary component: heater, thermal storage, control etc Cost: set up cost, maintenance/repair, operating, labour
21
Ventilator
Tent dryer
Thermal storage
Solar Collectors
Many configurations can be used, and the technology is still evolving
23
Collector Efficiency ()
This is defined as the ratio of the useful energy (Qu) to the available solar energy incident upon the collector (Qo) The quantity Qu is determined from the change in temperature between the inlet and outlet = Qu/Qo = M*Cp*(Tout Tin)/Qo
M = mass flow rate of fluid (kg/s) Cp = specific heat of fluid (J/kg.C) Tout/in = temperature at outlet/inlet of collector
Collector efficiencies can range from 10-60%, depending on many design factors
24
Design Calculation
25
Assumptions: At all points inside the solar dryer the air temperature and the air density is uniform There is no leakage of air and warm air only exits at the top Drying of grain is purely by natural convection The significant resistant to airflow is only due to the grain bed Data: V = 0.008(P/h)0.87 P = gH = 1.11363 0.00308T(C) h = 0.2 m h1 = 1 m h2 = 0.6 m
V = airflow (m/s) P = pressure drop (Pa) = density of air (kg/m3) h = grain bed thickness H = total height (m)
26