Documente Academic
Documente Profesional
Documente Cultură
GO TO:
27 Flight Controls
NOTE: in the begining of this step , observe that all of indicating dots are RED. After the item #1, the half of them becomes GREEN and after item #3, all of them will turn to GREEN.
CAUTION: Its very important to ensure that the Control Column is really moved to the STOPS and stays there for at least 3 (THREE) seconds.
CAUTION: When cycling the FCP switch, when pressing it, wait 3 seconds before press it again to cycle the actuator
7 Issue: Jan, 2005 Rev.:00 7
NOTE: in the begining of this step , observe that all of indicating dots are RED. After the item #1, the half of them becomes GREEN and after item #3, all of them will turn to GREEN.
CAUTION: Its very important to ensure that the Rudder Pedals really are moved to the STOPS and stays there for at least 3 (THREE) seconds.
CAUTION: When cycling the FCP switch, when pressing it, wait 3 seconds before press it again to cycle the actuator
8 Issue: Jan, 2005 Rev.:00 8
Note: Its important to confirm that all of indicating dots on NVM CLEARING are GREEN. If one or more still RED, you must repeat the entire procedure.
10 10 Issue: Jan, 2005 Rev.:00
THE MESSAGES:
THEN. . .
Power Down and Power Up the ACFT as required per SNL-170-27-0007.