Documente Academic
Documente Profesional
Documente Cultură
Contamination of the appliance tank will occur if the re-circulation valve is open during Class A foam operation.
Slide 1
Recirculation valve can be open during Class A foam operation without contamination
Slide 2
FoamPro
Retro - Fit
Slide 3
Retro fit
New installation
re-circulation valve
Slide 4
FoamPro
By-pass Valve Retro-Fit New Installation
Slide 5
NOTE: Depending on the control panel being used, the On / Off positions may be different.
Edition 1 May 2009
Slide 6
Slide 7
Class A concentrate inline strainer Class A concentrate tank supply on/off valve
Slide 8
calibrate flush
is used after installation of the system to calibrate the accuracy of the foam pump
inject Calibrate flush
This function my also re prime the foam pump following maintenance or should the foam tank run dry.
Slide 9
simple to operate easily adjusted proportioning rates highly accurate proportioning maintains desired mix ration despite changes in water flow and pressure proportioning across wide flow range 20 -1600 Lt no foam contamination of pump or appliance water tan no loss of pump flow or pressure number and length of hose is limited only by the pump capacity concentrate injection will not be interrupted when filling the foam tank
Slide 10