Documente Academic
Documente Profesional
Documente Cultură
What is AIRMAIL?
A radio messaging program for HAMS! A radio terminal program for KB-KB, KB to BBS A standalone Email program A host interface to Outlook (Express) All of the above!
Minimum Requirements?
Windows-95, 98, ME, NT4.0, Win-2000 or Win-XP For HF- Pactor Modem such as: -SCS PTC-II, IIe, or IIpro -Kantronics KAM+, KAM with "enhancement board, or KAM-98 -AEA PK-232mbx, PK-900, DSP1232/2232 (firmware must include Pactor mode, and ver 7.1 or later firmware is needed to use binary mode) -MFJ 1276 or 1278B (ASCII modes only) -HAL DXP-38 -SCS PTC-plus (Pactor-1), ASCII modes only
Minimum Requirements?
For VHF- Packet Modem such as : KPC3, KPC3+, Kam98, Kam+, PK232,PK900,DSP232, PTC-II AGWPE
Minimum Requirements?
Note: Some TNCs require a firmware upgrade because: 1. They dont support the host mode or 2. They dont have PACTOR
For example: MFJ-1278 requires MFJ-48 Eprom upgrade to version 3.7 which includes the host mode. The PK232 may require the MBX, MBX firmware, PSK , and/or low power upgrade Kantronics KAM requires firmware v6 or higher.
Credits?
Airmail is not "freeware" and is not "public domain".software. License to use is granted only under the terms outlined here, and other use is specifically prohibited. freely used without charge on amateur radio bands by licensed hams.
members of the U.S. Military Afiliate Radio System (MARS), and by members of the Canadian CAFRS system, when operating on authorized MARS/CAFRS frequencies. AirMail is Copyright 1997-2004 by Jim Corenman, KE6RK, and Sirius Cybernetics LLC, P.O. Box 2143, Friday Harbor, WA USA
Where to Download?
http://www.airmail2000.com
Need more laymans information on AIRMAIL?, try this link: http://radioministries.org/Systems.htm
Common Modules
Packet Client Keyboard to Keyboard, BBS Access, 1200 Baud Typical and for connection to Telpac nodes for email exchange Telnet Client Monitor internet connections for mail retrieval
Mail Server (SMTP/POP) Monitor port activities on 110 and 25 of the computer
HF Terminal Pactor communications with PMBOs
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring AIRMAIL
Configuring OUTLOOK
Configuring OUTLOOK
Configuring OUTLOOK
Next, the TNC should initialize properly if it doesnt check cables, baud rate. Make sure you have the right TNC selected in the AIRMAIL setup. If it still doesnt initialize, you may not have updated EPROMS in your TNC and the HOST mode is not supported. You need to get updated firmware.
RX SPLIT SCREEN
TX SPLIT SCREEN
Example of successful PACTOR initialization. If you dont get this screen, your TNC may not support PACTOR and may need to have a firmware upgrade.
Manual connect only, no autoforwarding listen before Transmitting to make sure frequency is clear
The End!