Documente Academic
Documente Profesional
Documente Cultură
Note:
MOSFET requires VGS =+15V for turn on
and 0V to turn off. LM311 is a simple amp with
open collector output Q1.
WhenB1 is high,
high Q1 conducts. VGS is pulled to
ground. MOSFET is off.
off
When B1 is low,
low Q1 will be off. VGS is pulled to
VGG. If VGG is set to +15V, the MOSFET turns on.
EXAMPLE: SIMPLE JFET
GATE DRIVER
Left side of the driver circuit is part where to control switching output.
R2, C1 – to control on time
R3 – to control off-time
R5 – to control pulse length (switching frequency)
D1 – to make sure ON/OFF independently
R2, C1 + R5
R3, C1 + R5
SNUBBERS
Using KVL,
SNUBBERS
From previous equation, the voltage across the switch is
bigger than the supply (for a short moment).
– Stress reduction:
reduction to shape the device switching waveform
such that the voltage and current associated with the device are
??????????????
??????????????
??????????????
????