3)Creation of LAPD & TRX BTS STEPS OMU Creation of Sectors Creation of TRX & LAPD ZESE:ID=125,BCSU=4,PCU=3,CRCT=974-28&&-30;
OMU
Configuration of OMU over ET BCF CREATION ZDSE:OM125:BCSU,4:62,1:32,974-27,4; ZEFC:125,E:DNAME=OM125; ZDTC:OM125:WO; CREATION OF SECTOR ZEQC:BCF=125,BTS=373,NAME=JAMUNAKHAS1,REF =50:CI=28251,BAND=900:NCC=0,BCC=1:MCC=404 ,MNC=56,LAC=344:; ZEUC:BTS=373,REF=50; ZEHC:BTS=373,REF=50:; ZEQE:BTS=373:HOP=RF,HSN1=24,HSN2=; ZEQA:BTS=373:MS=6,MAL=100,MO=0:; ZEQV:BTS=373:CDEF=16,CDED=16; ZEQV:BTS=373:GENA=N; Creation of Sector
CREATION OF TRX ZDSE:T1251:BCSU,3:0,1:32,974-1,0:; ZERC:BTS=373,TRX=1:PREF=P,GTRX=Y,DAP=125:FREQ=44,TSC=1,PCMTSL= 974- 1:DNAME=T1251:SIGN=2,CH0=MBCCH,CH1=SDCCB,CH2=TCHD,CH3=TCHD,CH 4=TCHD,CH5=TCHD,CH6=TCHD,CH7=TCHD:; ZDTC:T1251:WO; ZERM:BTS=373,TRX=01:CH2=SDCCH; ZERS:BTS=373,TRX=1:U; Creation of TRX Create the dynamic Abis pool (ESE).
ZESE:<pool id>,<circuit>,<size>,<BCSU id>,<PCU id>; Or
ZESE:<pool id>,<circuit>,<size>,<PSEI>;
It Creates the O & M signalling link.
ZDSE:<D-channel link set name>:<unit type>,<unit index>:<service access point identifier>,<terminal end point identifier>:<bit rate>,<PCM-TSL of D- channel>;
Create the BCF object instance for all site types
ZEFC:<BCF identification>,<site type>:<D- channel link set name>;
Activate the O & M link.
ZDTC:<D-channel link set name>:<D- channel state change>; Create the BTS. ZEQC:<BCF identification>,<BTS identification>:<cell identity>,<frequency band in use>:<network colour code>,<BTS colour code>:<mobile country code>,<mobile network code>,<location area code>;
Create the power control parameter set.
ZEUC:<BTS identification><reference BTS identification>; Create the handover control parameter set.
Modify BTS Identification Parameters. -Here we Set the BTS hopping mode parameter to RF hopping in the BCCH BTS.
ZEQE:<BTS Identification>:<BTS Hopping mode>,<Hopping Sequence Number 1>, <Hopping Sequence Number 2>;
Modify Mobile Allocation Frequecy List Usage Parameters.
ZEQA :BTS=<BTS identification>:MAL=<mobile allocation frequency list>,MO=<MAIO offset>,MS=<MAIO step>;
Disable GPRS in the cell(s) .
ZEQV:BTS=1:GENA=N;
Create LAPD links ZDSE:<D-channel link set name>:BCSU,<unit index>:<service access point identifier>,<terminal endpoint identifier>:<bitrate>,<PCM-TSL>,<SUB-TSL>;
Create a transceiver.
ZERC:<BTS identification>,<TRX identification>::FREQ=<frequency>,TCS= <training sequence code>,PCMTSL=<Abis speech circuit>:<D-channel telecom link set name>,<D-channel O&M link set number>:<RTSL types from 0 to 7>;
Activate the new link.
ZDTC: <D-channel link set name>:<D- channel state change>;
Unlock the BCCH TRX
ZERS:BTS=<bts_id>,TRX=<trx_id>:U;
Define the SDCCH channel to a TRX of the BTS using the GSM 900 frequency band