0 evaluări0% au considerat acest document util (0 voturi)
30 vizualizări4 pagini
ANSYS (r) is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. ANSYS Inc. Software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. Under an ANSYS software License Agreement.
ANSYS (r) is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. ANSYS Inc. Software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. Under an ANSYS software License Agreement.
ANSYS (r) is a registered trademark of SAS IP Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers. ANSYS Inc. Software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. Under an ANSYS software License Agreement.
First Edition ANSYS Release: 7.0 Published Date: March 14, 2003
Registered Trademarks: ANSYS
is a registered trademark of SAS IP Inc.
All other product names mentioned in this manual are trademarks or registered trademarks of their respective manufacturers.
Disclaimer Notice: This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review and Approval Procedures. This ANSYS Inc. software product (the Program) and program documentation (Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains provisions concerning non- disclosure, copying, length and nature of use, warranties, disclaimers and remedies, and other provisions. The Program and Documentation may be used or copied only in accordance with the terms of that License Agreement.
Copyright 2003 SAS IP, Inc. Proprietary data. Unauthorized use, distribution, or duplication is prohibited. All Rights Reserved. Training Manual DYNAMICS D Y N A M I C S
7 . 0
Training Manual March 14, 2003 Inventory #001809 TOC-3 Table of Contents Module 1 - Introduction A. Definition & Purpose M1-6 B. Types of Dynamic Analysis M1-9 C. Basic Concepts and Terminology M1-14 D. Variable Viewer M1-36 E. Introductory Workshop (WS-5) M1-39 Module 2 - Modal Analysis A. Definition & Purpose M2-3 B. Terminology & Concepts M2-5 C. Procedure M2-19 D1. Workshop - Modal Analysis (WS-17) M2-40 D2. Workshop - Modal Analysis (WS-23) M2-40 Module 3 - Harmonic Analysis A. Definition & Purpose M3-3 B. Terminology & Concepts M3-6 C. Procedure M3-12 D. Workshop - Harmonic Analysis (WS-27) M3-34 Module 4 - Transient Dynamic Analysis A. Definition & Purpose M4-3 B. Terminology & Concepts M4-5 C. Procedure M4-22 D. Workshop - Transient Analysis (WS-35) M4-58 Module 5 - Restarting an Analysis A. Definition & Purpose M5-3 B. Procedure M5-7 C. Other Restart Options M5-16 D. About Restart Files M5-18 E. Workshop - Restarting an Analysis (WS-43) M5-21 Module 6 - Spectrum Analysis A. Definition & Purpose M6-3 B. Terminology & Concepts M6-9 C. Procedure M6-20 D. Spectrum Analysis Guidelines M6-33 E. Workshop Response Spectrum (WS-49) M6-36 F. Random Vibration Analysis M6-37 G. Workshop Random Vibration (WS-55) M6-82 Module 7 - Mode Superposition A. Definition & Purpose M7-3 B. Procedure M7-8 C. Workshop - Mode Superposition (rerun WS-5) M7-26 Module 8 - Modal Analysis (Advanced Topics) A. Prestressed Modal Analysis M8-3 B. Workshop Pre-Stressed Modal (WS-61) M8-10 C. Modal Cyclic Symmetry M8-11 D. Workshop Modal Cyclic Symmetry (WS-67) M8-35 E. Large Deflection Modal Analysis M8-35