Documente Academic
Documente Profesional
Documente Cultură
Class summary
Acquire some of the tricks learned over the years for
AutoCAD Plant 3D. Some of the items to be covered
include the various ways to Route Pipe (Rolled Offsets, L2P,
Assisted Routing, F as you go, Elevations) creating
Equipment Templates, Using Viewports in P3D Modeling & XRay View, Layer and Template Options, Iso Messages and
Breaks, Model Symbols (Triangles, Pluses, Inverted
Triangles, Arrows, The Red Line of Connectivity) and the
proper method of making line and inline asset size changes.
Pipe Routing:
F as You
Go
Place Fittings
as you Route
by using the
F key
Pipe
Routing:
L2P (Line
to Pipe
Choose an
existing
3DPoly,
PLine or Line
to convert to
pipe
Pipe
Routing:
Assisted
Routing
Pick a Start
Point and
End Point
and let P3D
route it for
you
Start
Point
(NODE)
End
Point
(NODE
)
Pipe
Routing:
Rolled
Offset
Line
command
works best.
Draw the
box and
then use L2P
Equipment
Templates:
Create &
Store for
Multiple
Projects
Store on a
common
network
location for all
Graphical
View
Options:
Wireframe
and
3DWirefra
me
For
Viewing
and
Editing
Iso Pipe
Annotatio
n Globes
Graphical
View
Options:
Conceptual
Active
Drawing
Piping
X-Ref File
Piping
Graphical
View
Options:
Realistic
Visible
Edges
and
Tangent
Lines
Graphical
View
Options:
Shaded
No Visible
Edges
and
Tangent
Lines
Graphical
View
Options:
Shades of
Gray
Visible
Edges
and
Tangent
Lines
Active
Drawing
Piping
Highlighte
d
Graphical
View
Options:
X-Ray
Transpare
nt Shading
for
clearance
checking
and Iso
Message
visibility
Graphica
l View
Options:
Route
pipe
using
multiple
viewpor
ts
Template
Layers:
Create the
same
Layers you
want to
use on
your
Orthos in
your Model
Template
Layers:
Force the
Orthos to
use 3D
Model
Layers
Generating
Clean Isos:
Break
locations
You can
break the Iso
where you
want it and
add Tie-In
symbols
Generating
Clean Isos:
Floor
Penetratio
n and Iso
Message
Two globes
in the same
location
Sizes
Changes:
Change
One
Component
Use
Properties to
change the
size of a
component
Sizes
Changes:
Change
Multiple
Component
s
Use
Properties to
change the
size of all
Sizes
Changes:
Move a
Component
Use
Dynamic
Input (F12)
for
placement Use Grips to
Symbols:
On Pipe
Create Branch
Change
Elevation
Continue Route
Move Part
Substitute Part
Symbols:
On Fittings
Flip Part
Rotate Part
Substitute Part
Move Part
Continue Route
Symbols:
On Valves
Flip Part
Rotate Part
Move Part
Continue Route
Substitute Part
Symbols:
Other Symbols
Red Line of
Connectivity
The Compass
(CTRL+RightClic
k)
Symbols:
Other
Symbols
The Pencil
(CTRL+LeftClick
)
Steel Stretch
Grips
Autodesk is a registered trademark of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in
this document. 2013 Autodesk, Inc. All rights reserved.