Documente Academic
Documente Profesional
Documente Cultură
PHYSICS
UNIT 2
Module 2: A.C. Theory and Electronics
OBJECTIVE
1. describe the electrical properties of semiconductors and
distinguish between p-type and n-type material;
2. explain the formation of a depletion layer at a p-n junction;
3. discuss the flow of current when the p-n junction diode is
forward-biased or reverse-biased;
4. discuss the I-V characteristic of the p-n junction diode.
5. use the diode for half-wave rectification;
6. use the bridge rectifier (4 diodes) for full-wave rectification;
7. represent half-wave and full-wave rectification graphically;
8. discuss the use of a capacitor for smoothing a rectified ac
wave;
9. answer questions and solve problems regarding the topics
mentioned above.
INTRODUCTION
INTRODUCTION
SEMICONDUCTORS AND
ELECTRONICS
Semiconductors are materials whose electrical
conductivities are higher than those of insulators
but lower that those of conductors.
Silicon, Germanium, Gallium, Arsenide, Indium,
Antimonide and cadmium sulphide are some
commonly used semiconductors.
Semiconductors have negative temperature
coefficients of resistance, i.e. as temperature
increases resistivity deceases.
ENERGY BANDS IN
INSULATORS & CONDUCTORS
ENERGY BANDS IN
SEMICONDUCTORS
Forbidden band small for
semiconductors.
Less energy required for
electron to move from
valence to conduction
band.
A vacancy (hole) remains
when an electron leaves
the valence band.
Hole acts as a positive
charge carrier.
INTRINSIC SEMICONDUCTOR
Both silicon and germanium are tetravalent, i.e.
each has four electrons (valence electrons) in
their outermost shell.
Both elements crystallize with a diamond-like
structure, i.e. in such a way that each atom in the
crystal is inside a tetrahedron formed by the four
atoms which are closest to it.
Each atom shares its four valence electrons
with its four immediate neighbours, so that each
atom is involved in four covalent bonds.
INTRINSIC SEMICONDUCTOR
INTRINSIC SEMICONDUCTOR
EXTRINSIC CONDUCTION
N-TYPE EXTRINSIC
SEMICONDUCTOR
Arsenic has 5 valence
electrons, however, only
4 of them form part of
covalent bonds. The 5th
electron is then free to
take part in conduction.
The electrons are said
to be the majority
carriers and the holes
are said to be the
minority carriers.
P-TYPE EXTRINSIC
SEMICONDUCTOR
Gallium has 3
valence electrons,
however, there are 4
covalent bonds to fill.
The 4th bond therefore
remains vacant
producing a hole.
Free electrons on the n-side and free holes on the pside can initially diffuse across the junction. Uncovered
charges are left in the neighbourhood of the junction.
This region is depleted of mobile carriers and is
called the DEPLETION REGION (thickness 0.5 1.0
m).
I-V CHARACTERISTICS
I-V CHARACTERISTICS
When the diode is F.B., the current increases
exponentially with voltage except for a small
range close to the origin.
When the diode is R.B., the reverse current is
constant and independent of the applied reverse
bias.
Turn-on or cut-in (threshold) voltage V: for a
F.B. diode it is the voltage when the current
increases appreciably from zero.
It is roughly equal to the barrier p.d.:
For Ge, V ~ 0.2 0.4 V (at room
DIODE APPROXIMATION
CURVES
DIODE APPROXIMATION
CURVES
When are the different diode approximations used.
- 1st Approximation
In troubleshooting to determine if diode is
conduction or not?
- 2nd Approximation
More accurate method of determining load current
and voltage
- 3rd Approximation
Original design of diode circuits
DIODE DESTRUCTION
RECTIFICATION
Rectification is the process whereby a
sinusoidal alternating current is converted into
direct current.
There are two types of rectification:
Half-Wave Rectification
Full-Wave Rectification
HALF-WAVE RECTIFICATION
A single diode can be used to achieve halfwave rectification.
The disadvantage
of this
.
method is that only half of
the signal is used. The output voltage is direct (there is
no change in polarity) however it is not very smooth.
FULL-WAVE RECTIFICATION
FULL-WAVE RECTIFICATION
SMOOTHING
A capacitor can be used to filter (remove the
voltage variation) the output voltage.
SMOOTHING
QUESTIONS?