Documente Academic
Documente Profesional
Documente Cultură
Objectives
Objectives:
Types of Vessel.
Vertical Vessel Foundation Design Procedure.
Vertical Vessel Foundation Design Calculation.
Conclusion.
Questions.
Types of Vessel
Depend of the resting of vessel, there are two types of it:
Wind & Seismic loads shall be in accordance with Saudi Aramco Engineering
Standard SAES-A-112.
B. Steps of Calculation:
I. Sketch of Equipment:
It is show some specific and important information about the vessel
and foundation like:
Overall Height of Vessel.
Height of the Support.
Diameter & Number of anchor bolt.
In this step we need to find the total Live load to use it in our design
calculation and, anchor bolts check.
V. Load Calculation:
a) Gravity Load.
This par of calculation is to find two things:
First, one is the pedestal weight.
Second, is the total foundation weight.
b) Wind Load.
Refer to the criteria we take the information that we found, then applied to
wind load.
The reason to calculate wind load is to find:
Base Shear @ the top of pedestal ( t ).
Moment @ the top of Pedestal(t -m).
c) Seismic Load.
Refer to the criteria we take the information that we found, then applied to
seismic load.
The reason to calculate seismic load is to find:
Base Shear @ the top of pedestal ( t ).
Moment @ the top of Pedestal(t -m).
VI. Checking:
a) SOIL BEARING CAPACITY CHECK.
b) Sliding Check.
In this case need to check if the sliding load more or less than, the factor of
sliding force.
The factor of sliding force equal (SLFOSallow = 1.5) .
c) Overturning Check.
In this case need to check if the overturning load (Up-lift) more or less
than, the factor of overturning force.
The factor of overturning force equal (OTFOSallow = 1.5) .
Conclusion
Conclusion
Questions