Documente Academic
Documente Profesional
Documente Cultură
APM30 Introduction
www.huawei.com
Huawei Confidential
Page 2
Huawei Confidential
Page 3
References
APM30 User Guide
APM30 Quick Installation Guide
Huawei Confidential
Page 4
Huawei Confidential
Page 5
APM30 Overview
The APM30 is a supporting solution
APM30
Huawei Confidential
Page 6
Scenario
Scenario 1
APM30 working with
Distributed Base Stations
Application Scenario
Scenario
Scenario 2
APM30 working with
Separated Base Stations
Huawei Confidential
Page 7
Scenario
with built-in
batteries
Scenario
with battery
cabinet
Huawei Confidential
Page 8
Scenario
with the RF
cabinet(3RFU
)
Scenario
with the RF
cabinet(6RFU
)
Huawei Confidential
Page 9
Huawei Confidential
Page 10
NOTES
The APM30 can be used as the power cabinet, the battery cabinet, or the transmission cabinet
Specification
Remarks
Without the battery and
transmission equipment
65kg
With 48 V 24 Ah built-in
batteries: 482.6 mm x
222.25 mm x 310 mm
(19 in. in width, 5 U in
height, 310 mm in depth)
Huawei Confidential
Page 11
(3) PDU (2 U)
(5) APMI
(7) AFMU
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 12
(1) Heater (1 U)
(2) Heater (1 U)
(4) PDU (2 U)
(6) APMI
(8) AFMU
Huawei Confidential
Page 13
Function
Transfers the APM30 serial port
communication signals, Boolean
input/output signals, and EMI signals
Protects the dry contact input/output
signals and RS485 signals (connected to
the BBU/BTS)
Page 14
Huawei Confidential
Page 15
Name
AC Input Mode
Connections
Single-phase/threephase AC distribution
unit (for distributed
base stations)
PDU-01
Single-phase 220 V
Three-phase 220 V
Dual-live-wire AC
distribution unit (for
distributed base
stations)
PDU-02
Dual-live-wire 110 V
Single-phase/threephase AC distribution
unit (for separated
base stations)
PDU-03
Single-phase 220 V
Dual-live-wire AC
distribution unit (for
separated base
stations)
PDU-04
Three-phase 220 V
Dual-live-wire 110 V
PDU can be classified into four types according to the different AC input voltages and DC loads of the PDU
Huawei Confidential
Page 16
Huawei Confidential
Page 17
The power subrack consists of the PMU, PSU (AC/DC) and the wiring unit of the
power subrack (220 V).
The power subrack (AC/DC) converts the 220 V AC power to the -48 V DC power.
Huawei Confidential
Page 18
Color
Statu
Meaning
s
Power
running
LED
Green
On
Normal
Off
Protection
LED
Yellow
Off
Normal
On
Fault LED
Red
Off
On
Huawei Confidential
Page 19
(1) LEDs
Huawei Confidential
Page 20
Color
Status
Meaning
RUN
Green
The module runs normally but the communication with the main
control unit fails.
If the PMU does not communicate with the main control unit for
one minute, the communication fails. In this situation, the RUN
LED blinks four times every second.
On/Off
On
Off
No alarm is generated.
ALM
Red
Huawei Confidential
Page 21
Purpose
RS232/RS422 port
Battery control
switch
The battery control switch has two control ports ON and OFF, which are used for
powering on and off the battery.
Press and hold the port ON for 5s to 10s until the battery is powered on.
Press and hold the port OFF for 5s to 10s until the battery is powered off.
CAUTION:
You need to insert a small round bar into the hole when you operate the battery
control switch. When you hear a crack, the battery is powered on or off.
To operate the battery control switch on the front panel of the PMU, insert a
small round pole into the hole.
Two power supply test holes -48 V and 0 V are available for measuring power
voltages through an ordinary multimeter.
COM port
Backplane port
Huawei Confidential
Page 22
Bit 3
Bit 2
Bit 1
Bit 0
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Huawei Confidential
Monitoring Address
Page 23
Specification
41kg
-48 V 50 Ah or -48 V 92
Ah batteries, supporting
front access
Remarks
Without built-in batteries
Can be expanded to -48 V
184 Ah (two -48 V 92 Ah
battery groups)
Huawei Confidential
Page 24
Huawei Confidential
Page 25
Specification
40kg
482.6 mm x 488.95 mm x
310 mm (19 in. in width,
11 U in height, and 310
mm in depth)
Remarks
Without the user device
The depth refers to the
space between the
column and the back of
the cabinet.
Huawei Confidential
Page 26
(5) APMI
Huawei Confidential
Page 27
Huawei Confidential
Page 28
Huawei Confidential
Page 29
Installation Procedure
Huawei Confidential
Page 30
Expansion bolt
Huawei Confidential
Page 31
Huawei Confidential
Page 32
Huawei Confidential
Page 33
PMU
Huawei Confidential
Page 34
PMU
Huawei Confidential
Page 35
Description
E1/T1 cable
Huawei Confidential
Page 36
Check Item
The installation position of the cabinet strictly comply with the engineering design.
When the APM30 is mounted on a wall, the holes of the mounting ears are aligned with the bolt
holes. The mounting ears are placed against the wall securely.
When the APM30 is mounted on a metal pole, the pole fixtures are secure and reliable.
When the APM30 is installed on the floor, the base is securely installed.
The horizontal error of the cabinet is less than 3 mm and the vertical error is not greater than 3 mm.
All the bolts are tightened, especially for electrical connections. The flat washers and spring washers
are completely and properly installed.
The space reserved for the user devices is covered by a filler panel.
10
The cabinet door and the lock are functional. The gag lever post is tightened.
11
Huawei Confidential
Page 37
Internal
Thank You
www.huawei.com
www.huawei.com