0 evaluări0% au considerat acest document util (0 voturi)
21 vizualizări13 pagini
This document provides instructions for setting up a SANcopy session between a CX400 source host and a CX600 target host to mirror data. It involves zoning the storage system ports, checking target LUN sizes, establishing connections, deactivating LUNs using admhost software, and walking through a wizard to set up the SANcopy session and start mirroring data between the hosts.
This document provides instructions for setting up a SANcopy session between a CX400 source host and a CX600 target host to mirror data. It involves zoning the storage system ports, checking target LUN sizes, establishing connections, deactivating LUNs using admhost software, and walking through a wizard to set up the SANcopy session and start mirroring data between the hosts.
This document provides instructions for setting up a SANcopy session between a CX400 source host and a CX600 target host to mirror data. It involves zoning the storage system ports, checking target LUN sizes, establishing connections, deactivating LUNs using admhost software, and walking through a wizard to set up the SANcopy session and start mirroring data between the hosts.
Zone SANcopy Storage system ports with target Storage system ports. Check that the Target LUNs are equal or larger than Source LUNs intended to be used. Establish port connections from source storage system to target storage system ports. Do the same for the target to source system ports. Check that connections has been established. Tools => SAN Copy => Connection Summary Install admhost software into SAN hosts to activate/deactivate LUNs on any OS base. Deactivate the source and target LUNs cmd:/> admhost lun_deactivate o <drive letter>