Documente Academic
Documente Profesional
Documente Cultură
Conductive Sealant
www.aok-technologies.com
Thermal Greases
Though these are messy thermal interface solution, these
have thermal compounds with typical thermal resistance of
Kcm^2/W: 0.2 1.0.
Thermal Greases
www.aok-technologies.com
With silicone or hydrocarbon greases, loaded with thermally
conductive filler materials, this provides low thermal resistance.
www.aok-technologies.com
These are used to fill air gaps caused by
imperfectly flat or smooth surfaces which should
Thermal Pads
be in thermal contact. These are pre-cured
thermally conductive elastomeric pads which are
easy to apply.
Thermal Pads
www.aok-technologies.com
Due to their thickness,
these are low in thermal
resistance of Kcm^2/W: 1.0
3.0. Typically require high
pressure clamping to
achieve reasonable thermal.
Relatively firm
at room
temperature, it
becomes soft to
fill gaps at
higher
temperatures.
www.aok-technologies.com
Phase Change
Materials
With thermal
resistance of
Kcm^2/W: 0.3
0.7, these are
solid materials
that melt
between 50-
These are the 80C.
combination of
pad convenience
and grease
thermal
performance.
These avails some
adhesion and are
not rework able
www.aok-technologies.com
like greases and
Thermal
Tapes
www.aok-technologies.com
Solder
With traditional heat transfer method, it requires high heat,
electrically conductive but these days most other options are
electrically insulating. Rework not able and not suitable for
large bond areas. These are available with thermal resistance
of Kcm^2/W: 0.05
www.aok-technologies.com