Sunteți pe pagina 1din 125

2007-12-29 Security Level:INTERNAL

OptiX RTN 600 Product


Introduction
RTN---Radio Transmission Node

www.huawei.com

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.


Adjust Slide

Foreword

The OptiX RTN 600 is a split-mount digital microwave


transmission system developed by Huawei. RTN 600
provides various service interfaces and features flexible
configuration and easy installation. It can construct a radio
transmission network that serves as backhaul links for mobile
communication networks or private networks. The RTN 600
can also construct a hybrid network that is used to transmit
SDH, PDH, and Ethernet services together with the OptiX
series optical transmission products of Huawei.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 1
References
Product Description and Hardware Description in the OptiX
RTN 600 Product Manual.

Digital Microwave Communication principle

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 2
Adjust Slide
Objectives
Upon completion of this course, you will be able to:
Describe the main characteristics of OptiX RTN 600.

Describe the system structure ,software and hardware


structure of OptiX RTN 600.

Know the types of the IDU and their features

List the functions of boards in the IDU, ODU, Hybrid coupler.

New introduce slide of V1R3 is remarked by


R2 New Slide

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 3
Contents
1. Equipment Overview

2. Equipment Structure

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 4
Contents
1. Equipment Overview

1.1 Equipment Components


IDU

ODU

Antenna

Intermediate Frequency (IF) Cable

Hybrid coupler

1.2 Equipment Characteristics

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 5
Adjust Slide
Equipment Components

Antenna

Hybrid
IF Cable Coupler

ODU
Pole
IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 6
R2 New Slide

Equipment Components Cont.


Antenna

Hybrid
Coupler

IF Cable

ODU
Pole

IDU 605 2B

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 7
R2 New Slide
IDU

The IDU is the indoor unit of an OptiX RTN 600 system. It


accesses services, and performs multiplexing/de-
multiplexing and IF processing of the services.

The OptiX RTN 600 IDU is available in three types: IDU


610, IDU 620, and IDU 605.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 8
IDU 610/620

IDU 610 is 1U high and supports


one microwave direction.

IDU 610

IDU 620 is 2U high and supports


maximum four microwave
directions.

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 9
R2 New Slide
IDU 605
IDU 605 is 1U high , supports one microwave direction., have there types:

IDU 605 1A:


maximum capacity 5 E1
Support 1+0 configure
IDU 605 1A

IDU 605 1B:


maximum capacity 16 E1
Support 1+0 configure IDU 605 1B

IDU 605 2B:


maximum capacity 16 E1
Support 1+1configure IDU 605 2B

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 10
Adjust Slide
IF Cable
The IF cable provides -48V power for ODU and transmits the IF signal and
ODU management signal between IDU and ODU.
The IDU and ODU are connected by IF jumper and IF Cable:
IF jumper The IF jumper is a 2 m RG223 cable. The IF jumper uses a TNC
connector at one end to connect to the IF board, a type-N connector at the other
end to connect to the IF cable.
IF CableBoth end are type-N connector, one end to connect to IF jumper, the
other end to connect to ODU. There are two types of IF Cable: RG-8U and 1/2
inch.
RG-8U cable is used for the distance less than 180 meter.
1/2 inch cable is used for the distance between 180m and 300m.

IF transit jumper IF cable

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 11
Adjust Slide
ODU

Outdoor unit (ODU) realizes the


mutual conversion between IF
analog signal and RF signal.

6G ODU 7~38G ODU

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 12
Adjust Slide

Hybrid Coupler
When two ODUs share one antenna, the ODUs must be
connected to an RF signal coupler/ splitter (hybrid coupler).
Then, the hybrid coupler is connected to the antenna.

6G Hybrid Coupler 738G Hybrid Coupler

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 13
Adjust Slide
Antenna
The antenna performs the directional transmission and reception
of RF signals. The main parameters are frequency band,
diameter and antenna gain.

Single-polarized antenna dual-polarized antenna

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 14
Adjust Slide
IDU 610/620 Characteristics
PDH/SDH integrated microwave transmission system.

The modulation mode and link capacity are set through software.

Microwave link supports the SNCP (IF0 Board not support


SNCP

Except for SL4IF0IFXEMS6 not support IDU 610
the other boards of IDU 610 and IDU 620 are compatible each
other.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 15
R2 New Slide

IDU 610/620 Characteristics (cont.)

IFX board support XPIC function

Support N+1 protection and REG function


Synchronous data interface /Orderwire spanning function
SL61SCCVER.C
The external clock interface supply 2M overhead , it can be used
as the wayside service interface, or can transparently transmit
DCC bytes, synchronous data overhead bytes, asynchronous data
overhead bytes, and orderwire overhead bytes.
Support STM-4 MSP

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 16
R2 New Slide
IDU 605 Characteristics
PDH microwave transmission platform

The modulation mode and link capacity are set through software.

Microwave link not support SNCP

Integrative box equipment

Synchronous data interface, Asynchronous data interface

orderwire spanning, orderwire addressing calls, orderwire group


calls.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 17
R2 New Slide
IDU Compare
Item IDU 605 IDU 610 IDU 620

RF configuration mode 1+0 IDU 605 1+0 1+0,1+1, N+1, XPIC


1A/1B

1+1 IDU 605 2B

IF Board IF logical board (IF0) IF1 IF0, IF1, IFX

Maximum capacity (single 5 E11A STM-1


carrier) 16 E11B/2B

Pluggable board Not support support

Microwave type PDH SDH/PDH

Microwave modulation QPSK QPSK/16QAM/32QAM/64QAM/128Q


scheme AM

Service type E1 SDHPDHE1E3DS3 and


Ethernet services

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 18
R2 New Slide

IDU Comparecont.
Item IDU 605 IDU 610 IDU 620

Chassis 1U 1U 2U
height

heat nature heat nature heat dissipation dissipates heat


dissipation dissipation mode mode through wind cooling
mode

Built-in ADM No support support support

Mobile No support support support


FLASH Card

Clock Tracing Automatic tracing Manual configure Manual configure

Mother board No Yes Yes


design
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 19
Adjust Slide
Questions
What are the components of OptiX RTN 600? What
are the functions of them? What about the connection
relation among the components?

What types do the optiX RTN 600 have What are the
characteristics of each type IDU?

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 20
Contents
1. Equipment Overview

2. Equipment Structure

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 21
Adjust Slide
Contents
Equipment Structure

2.1 System Diagram

2.2 Software Structure

2.3 IDU 605 Structure and Boards

2.4 IDU 610/620 Structure and Boards

2.5 ODU Interfaces and Parameters

2.6 Hybrid coupler Parameters

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 22
Adjust Slide
System Diagram
OptiX RTN 600 is divided based on functional units. It consists of service
interface unit, cross-connection unit, IF unit, control unit, clock unit,
RF signal
auxiliary interface unit. ODU

IF signal Antenna

PDH Baseband Cross-co Baseband


Service
SDH interface signal signal
nnect IF unit
Ethernet unit unit

Control and overhead bus

Orderwire Auxiliary Clock Control Fan Power


External alarm interface unit unit unit unit
Synchronous/ unit
asynchronous
data
External clock NM data -48V/-60V DC
or WSdata

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 23
R2 New Slide

System Diagram cont.


The IDU 605 consists of a series of functional units, including the
service interface unit, IF unit, control unit, auxiliary interface unit,
and power unit. RF signal
ODU

IDU 605 Antenn


IF signal
a

Baseband Overhead Orderwire data


Service Auxiliary
E1 interface signal IF unit signal interface External alarm data
unit unit Synchronous/
asychronous
Control bus data

Control Power
unit unit

NM data -48V DC

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 24
Adjust Slide
Software Structure
In the OptiX RTN 600, all the board
software and host software are integrated NM software
together and run on the SCC board.

ODU is regarded as a logical board. The


Host software
ODU board software in the SCC board
manages and controls the ODU hardware
Board software
through the management signal between ODU EMS6

the IDU and ODU. SCC

EMS6 board has independent board


software, which runs in the CPU of the
EMS6 board.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 25
Adjust Slide

Contents
Equipment Structure

2.1 System Diagram

2.2 Software Structure

2.3 IDU 605 Structure and Boards

2.4 IDU 610/620 Structure and Boards

2.5 ODU Interfaces and Parameters

2.6 Hybrid coupler Parameters

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 26
R2 New Slide

IDU Structure IDU 605 1A

IDU 605 is 1U high and


adopts the nature heat
dissipation mode.
Support 1+0 configuration. IDU 605 1A

NotePF1 support 5E1, E1


interface is DB44, the
physical interface can
access 8E1,but only use IDU 605 1A logic board configuration
1~5E1, 6~8E1 not be
processed.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 27
R2 New Slide

IDU 605 1A Front Panel Interface


Main Boolean Synchronous
power interface Data Interface 1~5E1 Interfaces
Indicators
switch

Order
wire
NM Interface ODU
Power NM
Serial Asynchronous Interfaces
interfaces Interface
Port data Interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 28
R2 New Slide

IDU Structure IDU 605 1B

IDU 605 is 1U high and


adopts the nature heat
dissipation mode.
Support 1+0 configuration. IDU 605 1B

IDU 605 1B logic board configuration

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 29
R2 New Slide

IDU 605 1B Front Panel Interface


Synchronous
Main Boolean Data
power interface 1~16E1
Indicators Interface
switch Interfaces

Order
wire
Interface
Power NM NM
interfaces Interface Serial ODU
Port Asynchronous
data Interface Interfaces

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 30
R2 New Slide

IDU Structure (IDU 605 2B

IDU 605 is 1U high and


adopts the nature heat
dissipation mode. IDU 605 2B
Support 1+1 configuration.

IDU 605 2B logic board configuration

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 31
R2 New Slide

IDU 605 2B Front Panel Interface


Main Boolean Synchronous 1~16 E1
power interface Data Interface Interfaces
Indicators
switch

Order
wire
NM Interface ODU
Power ODU NM
Serial Interfaces
interfaces power Interface Asynchronous
switches Port
data Interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 32
R2 New Slide
IDU 605 Indicators
Indicators of IDU 605 1A and IDU 605 1B:

Name Color and meaning

RED The system has POWER_ALM


PWR
GREENThe system doesnt has POWER_ALM

On for 100 ms and off for 100 ms alternately (green) :When the board
is being powered on or being reset, the software is being loaded.
On for 500 ms and off for 500 ms alternately (green) :The board is in
the BIOS holdover state. The NE software does not exist or is not
IDU
running
RED A critical or major alarm occurs in the services.
YELLOW: A minor or warning alarm occurs in the services.
GREEN The IDU works normally.

RED : A critical or major alarm occurs in the ODU, or the ODU has no
power access.
ODU
YELLOW: A minor or warning alarm occurs in the ODU.
GREEN The ODU works normally.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 33
R2 New Slide

IDU 605 Indicators (Cont.)


Indicators of IDU 605 2B:

Name Color and meaning

PWR The same as IDU 605 1A andIDU 605 1B

IDU The same as IDU 605 1A andIDU 605 1B


Indicators of the backup ODU(slot17)The same as IDU 605 1A andIDU
ODU1
605 1B
Indicators of the main ODU(slot18)The same as IDU 605 1A andIDU
ODU2
605 1B
The Indicators of the standby IF board(slot7),
ACT1 on( green) The backup IF board is in active state
off The backup IF board is in standby state

The Indicators of the main IF board(slot8), color :


ACT2 On (green): The main IF board is in active state
off The main IF board is in standby state

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 34
R2 New Slide

IDU 605 Logical Board


An IDU 605 is composed of one system board and one power board.
Each functional unit on the physical boards of the IDU 605
corresponds to a logical board and is allocated with a logical slot.

Logical Board Name Full Name Logical Slot

PW48B 48 V power board Slot 1

SCC System control and Slot 2


communication board

EOW Orderwire board Slot 3

PF1 5xE1 tributary board Slot 4

PH1 16xE1 tributary board

IF0 PDH IF board Slot 8IDU605 1A/1B)

Slot7/8IDU605 2B)

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 35
R2 New Slide

IDU 605 Signal Processing Flow


IDU 605 not support build-in ADM function, the signal need
not through the cross-connect process, multiplexes E1
service signals into microwave frame signals directly. The
signal processing flow as following:

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 36
R2 New Slide

IDU 605 Clock Characteristics


The clock tracing neednt to be configured. It is auto-Negotiation,
and clock tracing as the following results:

In a point-to-point network which the NE use IDU 605, the clock


trace auto-negotiation result is the high site NE as free-run
modes and the low site NE trace the high site clock sourse.

One site that the NE use IDU 605, the opposite site that the NE
use IDU 620, the result of clock trace is the IDU 605 clock trace
the IDU 620s clock source.
NoteThe IDU 620 clock cannot be set to trace the IDU 605 clock. Otherwise
the clock will self-lock.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 37
R2 New Slide

IDU 605 Other Characteristics


Supports the setting of the impedance of E1 signals through
the software (75-ohm or 120-ohm).

Supports 1+1 protection for the input power.

Supports the group call function of the orderwire, the group


number is 888. The orderwire number also can be set as
designing.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 38
Adjust Slide

Contents
Equipment Structure

2.1 System Diagram

2.2 Software Structure

2.3 IDU 605 Structure and Boards

2.4 IDU 610/620 Structure and Boards

2.5 ODU Interfaces and Parameters

2.6 Hybrid coupler Parameters

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 39
Adjust Slide

IDU Structure ( IDU 610)

IDU 610 is 1U high and adopts


the nature heat dissipation mode.

Support 1+0 configuration.

Line board /tributary IF board


board/data board
Note: The slot
EXT slot3 EXT slot4 numbering rule is
PXC slot1 SCC slot2 from bottom to up
and left to right.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 40
Adjust Slide

IDU Structure ( IDU 620)


IDU 620 is 2U high and
dissipates heat through wind
cooling.

Support a maximum of 4+0


configuration or two groups of
1+1 configuration.
EXT slot7 EXT slot8
slot EXT slot5 EXT slot6
20 The slot numbering
PXC slot3 EXT slot4
rule is the same as
PXC slot1 SCC slot2 OptiX RTN 610 .

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 41
IDU Board -- IF Board IF1

The IF board receives and transmits 1x IF signal. It realizes the


conversion between baseband digital signal and IF signal, it also
provides -48V DC power supply and management signal to the ODU.

IF cable interface ODU power Indicators


supply switch

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 42
R2 New Slide

IDU Board -- IF Board IF0

IF cable ODU power Indicators


interface supply switch

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 43
R2 New Slide

IDU Board -- IF Board IFX

XPIC input /output ODU power Indicators


IF cable
signal port supply switch
interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 44
IF Board -- Types Adjust Slide

The IFO is available in two types: IF0A / IF0B

The IF1 is available in two types: IF1A/IF1B.

The IFX is only one type.

IF1A/IF0A IF1B/IF0B/IFX

The -48V power is isolated -48V power supply is output


by the DC-DC power supply directly to ODU.
module and then sent to the Support the DC-C grounding
ODU. mode only.
Support DC-I and DC-C
grounding modes.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 45
IF Board -- Board Installation
No limitation for board installation under HSB configuration.
Only installing IF boards in paired slots under SD or FD configuration.

EXT slot3 EXT slot4


Recommended
PXC slot1 SCC slot2
installation
sequence for IF
IDU 610
boards

Paired Slots EXT slot7 EXT slot8


slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
Paired Slots PXC slot1 SCC slot2

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 46
IF Board -- Block Diagram
Backplane
ODU management signal
SMODEM unit
HSM switch signal
Paired
slots

TUPP Cross-
IF interface Combiner IF MUX / unit connect
Modem active/
interface process DEMUX
unit standby
unit unit unit
unit

Control bus

Support
Power Clock loop-back Logical control
unit unit function unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 47
IF Board -- Receiving Signal Flow
Serial port
signal
ODU
management
SMODEM unit SCC board
analog signal

IF interface Combiner IF
Modem
interface process
unit
unit unit

Analog IF Digital IF Baseband


signal signal digital signal

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 48
IF Board -- Receiving Signal Flow (Cont.)

When MUX/DEMUX unit works in SDH mode:

SDH RS, MS, HP The first 2M The second 2M overhead


overhead and pointer overhead signal signal--wayside E1
processing

SCC
board
SDH microwave
frame signal MUX / Clock signal
Modem Cross-connection
DEMUX
unit and clock board
unit

TUPP unit
Detecting LINKID,
ATPC, and microwave
RDI information LINK ID identifies the microwave link and is
used to distinguish different microwave links.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 49
IF Board -- Receiving Signal Flow (Cont.)

When MUX/DEMUX unit works in PDH mode:


Only 1x 2M
overhead
Detecting the frame signal
header and B1 byte

SCC board

PDH microwave MUX / Clock signal Cross-connection


Modem frame signal DEMUX and clock board
unit unit
TUPP unit

Detecting J0, LINKID,


ATPC and microwave VC4 signal
link RDI information.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 50
Receiving Signal Flow in HSM
Mode
Bite Error or
alarm happened MUX / DEMUX
unit

Modem
unit
two signals Local board
TUPP
have the Microwave signal unit
phase
Standby board
difference.
Microwave signal
MUX /
DEMUX
Unit
On
Standby 2 signals are
IF board synchronized

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 51
IF Board -- Receiving Signal Flow (Cont.)

High-order
pointers are
aligned
Active
VC12/VC3 cross-
service connection
Cross- board
MUX / connection
TUPP unit
DEMUX active/
unit VC4 service standby Standby
unit cross-
connection
board
High-order pointer signal

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 52
IF Board -- Transmitting Signal
Flow
Clock fault

Clock
Active
System clock used cross-
by local board Service connection
clock board

VC4 signal
MUX / Clock
DEMUX Standby
unit High-order pointer cross-
Service connection
signal C1J1
clock board
Cross-connection
active/standby unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 53
IF Board -- Transmitting Signal Flow
(cont.)

When MUX/DEMUX unit works in SDH mode:


Process the
2M overhead
overhead, pointer,
and scramble. SCC
board

2M overhead wayside E1

MUX /
SDH microwave
DEMUX
frame signal VC4 signal Cross-
Modem unit
unit connection
active/
standby
unit
High-order
pointer signal
Inserting LINKID,
ATPC, and microwave
link RDI information.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 54
IF Board -- Transmitting Signal Flow
(cont.)

When MUX/DEMUX unit works in PDH mode:

De-mapping TU12 and set the


PDH microwave frame overhead,
scramble, LINKID, ATPC, and 1x 2M overhead
SCC
microwave link RDI information.
board

MUX /
PDH microwave
DEMUX
frame signal VC4 signal
Modem unit Cross-
unit connection
active/
standby
unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 55
IF Board -- Transmitting Signal Flow
(cont.)
Serial port
signal
ODU
management
SCC
analog signal SMODEM unit board

IF
interfaceCombiner IF
Modem
interface process
unit
unit unit

IF analog IF digital Baseband


-48V power signal digital signal
signal
supply

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 56
Adjust Slide

IF1 Board -- IF Performance


R1 version, the IF1 board support 7 working mode.

Performance
Item
4 X E1 8 X E1 16 X E1 STM-1
Modulation
QPSK 16QAM QPSK 16QAM QPSK 16QAM 128QAM
mode
Channel 27.5/
13.75 /14 13.75 /14
spacing 7 3.5 7 27.5 / 28 b
a 28 b a
(MHz)
PDH signal is coded through the Reed-Solomon (R-S).
Coding
scheme SDH signal is coded through the Trellis-Coded Modulation (TCM) and R-
S.
a: At the 18G band, the channel spacing is 13.75MHz, At other bands,
the channel spacing is 14MHz.
Remarks
b: At the 18G band, the channel spacing is 27.5MHz. At other bands, the
channel spacing is 28MHz.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 57
R2 New Slide

IF1 Board -- IF Performance


For R2, the IF1 board add 8 types of working mode.

Item Performance

Capacity E3 22E1 26E1 32E1 35 E1 44 E1 53 E1

Modulation QP 16 32 64 128 16 32 64
mode
SK QAM QAM QAM QAM QAM QAM QAM

Channel 28 14 14 14 14 28 28 28
spacing
(MHz)

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 58
R2 New Slide

IF0 Board -- IF Performance


IF0 board support four types of working mode: 16E1, 10E1, 5E1,
2E1modulation mode only support QPSK.

Performance
Item
16 E1 10 E1 5 E1 2 E1
Modulation
QPSK QPSK QPSK QPSK
mode
Channel
spacing
(MHz) 28 14 7 3.5

NoticeThe IF0 board and the IF1 board cannot interconnection, even though

they are in the same IF working mode.

IF0 board is use for interconnection with IDU 605

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 59
R2 New Slide

IFX Board -- IF Performance


IFX support one working mode: STM-1, 128QAM, 28MHz

coded through the Trellis-Coded Modulation (TCM) and R-S

Support XPIC function

In the service of STM-1 mode, when the XPIC function is disabled,


the IFX can be interconnected to IF1, but it isnt recommended.

NoteWhen the XPIC function is disabled, the XPIC IN port and


XPIC OUT port must be looped back by using an XPIC cable.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 60
IF Board -- IF Signal Parameters
Item Performance
Transmitting frequency 350
(MHz)
IF signal Receiving frequency 140
(MHz)
Impedance (ohm) 50

Modulation mode ASK


ODU Transmitting frequency 5.5
management (MHz)
signal
Receiving frequency 10
(MHz)

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 61
IF Board -- Indicators
Indicator Status Meaning
On The board is working normally

STAT On The board hardware is faulty.


Off The board is not working, not
created, or has no input power.
On The service is normal.
On The service has a critical or major alarm.
SRV
On The service has a minor or remote alarm.
Off No services are configured.
On The space link is normal.
LINK
On The space link is faulty.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 62
IF Board Indicators (Cont.)
Indicator Status Meaning
On The ODU is normal.
ODU
On The ODU is faulty.
On The microwave BER exceeds the
threshold.
BER
Off The microwave BER does not exceed
the threshold.
On The remote equipment has a Remote
RMT Defect Indication (RDI).
Off The remote equipment has no RDI.
On The board is in active state.
ACT
Off The board is in standby state.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 63
R2 New Slide

IF Board Indicators (Cont.)


Indicator Status Meaning
on The XPIC input signal is
normal.
XPIC
on The XPIC input signal is lost.
off The XPIC function is disabled.
IF0IF1IFX board have the STATSRVLINKODURMTACT
indicator.

IF0IF1 have the BER indicatorIFX board have no BER indicator

IFX board have the XPIC indicator, IF0/IF1 board have no XPIC
indicator.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 64
R2 New Slide

IFX BoardXPIC features


XPIC (Cross-polarization interference cancellation ) is a
technology used together with co-channel dual-polarization
(CCDP). The application of the two technologies doubles the
wireless link capacity over the same channel.

XPIC is used to effectively improve the transmission capacity and


the utilization of the frequency spectrums. It is widely used in the
trunk microwave. As the split-mount microwave develops and the
frequency resources become insufficient in recent years, the
XPIC technology is applied in the split-mount microwave.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 65
R2 New Slide

IFX BoardXPIC features Cont.


Dual-polarized antennaA dual-polarized antenna can transmit and
receive RF signals on the two polarizations at the same time. Only one
RF interface exists at the rear end of a uni-polarized antenna, of which
the polarization orientation can be adjusted. Two RF interfaces, however,
exist at the rear end of a dual-polarized antenna. By default, the
polarization orientation of the left interface is vertical, and the polarization
orientation of the right interface is horizontal.
OptiX RTN 600 can configure as one XPIC working group through use
two IFX board, two ODU, one dual-polarized antenna. The XPIC cable is
used to transmit the reference IF signal between the two IFX boards of
the XPIC working group, process the dual polarization signal at the same
time.
An XPIC system has two configuration modes: single-NE configuration
and dual-NE configuration
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 66
R2 New Slide

IFX BoardXPIC features Cont.


Typical configuration of XPIC (single-NE configuration)

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 67
R2 New Slide

IFX BoardXPIC features Cont.


Typical configuration of XPIC (dual-NE configuration)

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 68
R2 New Slide

IFX BoardXPIC features Cont.


Installation Limitations
Only IDU 620 is applicable.
The ODU must adopt the separate mount mode, because the dual-polarized
antenna is used.
Configuration Limitations :
1. The link ID-V and link ID-H should be difference.
2. XPIC supports the STM-1 microwave working mode only The transmit power
and frequency of the two ODUs that are in an XPIC working group should be the
same It is recommending the ATPC is disable, each of the ATPC parameters
(ATPC enable status, ATPC upper threshold, ATPC lower threshold, and ATPC
adjustment) should be set to the same value if the ATPC set to enable.

3. Make sure the XPIC cable be connected correctly to realize the XPIC function.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 69
R2 New Slide

IFX BoardXPIC features Cont.


When two IFX boards that form an XPIC protection group are
installed on an IDU, you can create an XPIC protection group to
ensure that the XPIC protection group is configured with the same
working mode, transmission frequency, transmit power, and ATPC
attributes.
IFX can work in XPIC-enable state (The XPIC Enabled parameter
must be set to Enabled );it can also work in XPIC-disable state.
XPIC-enable stateThe two IFX boards from the XPIX system
are connected by an IF jumper for transmitting the XPIC
cancellation signal to each other.
XPIC-disable state IFX board can be connect to IF1 in the STM-
1service, but it is not recommended .

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 70
R2 New Slide

IFX Board XPIC and 1+1 Protection

The four IFX boards in two XPIC working groups can form two 1+1 protection
groups, and the both IF boards from the XPIC working groups must be the main
boards or the back boards in 1+1protection groups

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 71
XPIC Cable

Figure 1single-NE configuration Figure 2dual-NE configuration


XPIC Cable has three typesshort-linelong-line (short)
long-line (long).
Commonlythe typical configuration
1Two short-lines in the figure1 IN OUT IN OUT
2Two long-lines (short) or two long-lines (long)
in the figure2 Figure 3
3one long-line (short) and one long-line
(long) in the figure3

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 72
R2 New Slide


Installation Limitations and Configuration Limitations of XPIC

XPIC features?

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 73
IDU Board -- Tributary Board PH1

The tributary board PH1 processes 16 channel E1 signals and
provides the E1 interface.

Indicator 1-8 channel E1 9-16 channel E1


DB44 DB44 interfaces
interfaces
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 74
R2 New Slide

IDU Board -- Tributary Board PD1

The tributary board PD1 processes 32 channel E1 signals and


provides the E1 interface.

116 E1 1732E1
indicator
MDR68 interface MDR68 interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 75
R2 New Slide

IDU Board -- Tributary Board PL3


The tributary board PL3 processes 3 channel E3/DS3 signals and
provides the E1 interface.
PL3 not support the E3 and DS3 services hybrid configured.
Select the type of the accessed service signal as E3 or DS3 through
software.

indicator SMB
interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 76
Tributary Board -- Types
PH1A PO1A PH1B PO1B
16-channel E1 8-channel 16-channel E1 8-channel E1
interface E1 interface interface board
75 ohm 75 ohm 120 omh 120 ohm

The board interface impedance Four groups of


is selected through the jumper: jumpers
determine the
If there is a jumper, the impedance.

impedance is 75 ohm.
If there is no jumper, the
impedance is 120 ohm.
Front
panel

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 77
R2 New Slide

Tributary Board -- Types (cont.)

PD1A PD1B PL3


32-channel E1 32-channel 3-channel
interface E1 interface E3/DS3 interface
75 ohm 120 omh 75 ohm

PD1 board interface impedance is selected


Eight groups
through the jumper: of jumpers
determine the
If there is a jumper, the impedance is 75 impedance.
ohm.

If there is no jumper, the impedance is


120 ohm.
Front
PL3 board interface impedance cannot panel
changed through the jumper

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 78
Tributary Board -- Board installation

Recommended EXT slot3 EXT slot4


installation
PXC slot1 SCC slot2
sequence for TU
boards
IDU 610

EXT slot7 EXT slot8


slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 79
Tributary Board -- Block Diagram
Backplane

E1/E3/DS3 Cross
interface Coding -connect
Tributary Mapping/
and active/
interface De-mapping
decoding standby
unit unit
unit unit

Control bus
Support loop-back Logical
Clock
function control
unit
unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 80
Tributary Board -- Indicators
Indicator Status Meaning
On The board is working normally.

On The board hardware is faulty.


STAT
Off The board is not working, or created, or
has no input power.
On The service is normal.
On The service has a critical or major alarm.
SRV On The service has a minor or remote
alarm.
Off No services are configured.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 81
IDU Board -- Line Board SD1/SDE

The line board processes 1-2 channel STM-1 signal and


provides STM-1 optical or electrical interface.

LC optical
interface

SMB
electrical
interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 82
R2 New Slide

IDU Board -- Line Board SL4

The SL4 line board processes 1 channel STM-4 signal and provides
STM-4 optical interface.

indicator LC optical
interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 83
Line Board -- Types
SD1 SL1

Dual-port STM-1 Single- port STM-1


optical interface optical interface

Ie-1 S-1.1 L-1.1 L-1.2 Ie-1 S-1.1 L-1.1 L-1.2


interface interface interface interface interface interface interface interface

SDE SLE

dual-port STM-1 Single-port STM-1


electrical interface electrical interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 84
R2 New Slide

Line Board Types (cont.)


SL4 line board support three optical module

SL4

Single STM-4 optical interface

S-4.1 L-4.1 L-4.2


interface interface interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 85
Line Board -- Board installation

Recommended EXT slot3 EXT slot4


installation
PXC slot1 SCC slot2
sequence for LU
boards
IDU 610

EXT slot7 EXT slot8


slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2

IDU 620
Note: Only slot 6/slot 8 support SL4

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 86
Line Board -- Block Diagram

Support the loop-back function Backplane


Overhead bus

Optical Overhead Cross-


TUPP
interface O/E process connect
unit
converter unit active/
unit standby
unit

Control bus

Clock Logical
unit control
unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 87
Line Board -- Interface Parameters
Item Performance
Nominal bit rate (kbit/s) 155520

Application code Ie-1 S-1.1 L-1.1 L-1.2


Multi-
Optical fiber type G.652 G.652 G.652
mode fiber
Transmission distance (km) 0.5 15 40 80/100

Working wavelength (nm) 1260-1360 1261-1360 1263-1360 1480-1580


Average transmit optical 19~
15~8 5~0 5~0
power (dBm) 14
Minimum sensitivity (dBm) -23 -28 -34 -34
Minimum overload (dBm) -14 -8 -10 -10
Minimum extinction ratio (dB) 8.2 8.2 10 10

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 88
R2
Line Board -- Interface Parameters
Cont.
Item Performance
Nominal bit rate (kbit/s) 622080
Application code S-4.1 L-4.1 L-4.2
Optical fiber type G.652 G.652 G.652
Transmission distance
(km)
15 40 80

Working wavelength (nm) 12741356 12801356 14801580

Average transmit optical


power (dBm)
158 32 32

Minimum sensitivity (dBm) -28 -28 -28


Minimum overload (dBm) -8 -8 -8
Minimum extinction ratio
(dB)
8.2 10 10

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 89
Line Board -- Indicators
Indicator Status Meaning
On The board is working normally.
On The board hardware is faulty.
STAT
Off The board is not working, or created, or no power
supply.
On The service is normal.
On The service has a critical or major alarm.
SRV
On The service has a minor or remote alarm.
Off No services are configured.
On No.1 opt. port on the SL1/SD1 board has a R_LOS
alarm.
LOS1
Off No.1 opt. port on the SL1/SD1 board has no R_LOS
alarm.
On No.2 opt. port on the SD1 board has a R_LOS alarm.
LOS2
Copyright 2006Off
Huawei Technologies
No.2 Co.,opt.
Ltd. All rightson
port reserved.
the SD1 boardPage
has90no R_LOS alarm.
R2 New Slide

Line Board -- Indicators



on opt. port on the SL1/SD1 board has a
R_LOS alarm.
LOS
off opt. port on the SL1/SD1 board has no
R_LOS alarm.

Note: All the line board have the STAT and SRV indicator.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 91
IDU Board -- Ethernet Board EFT4
EFT4 is a Ethernet transparent transmission board. It receives,
transmits and processes four-channel Ethernet signals.

Recommended EXT slot3 EXT slot4


installation
PXC slot1 SCC slot2
sequence for
EFT4 boards
IDU 610

EXT slot7 EXT slot8


slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 92
R2 New Slide

IDU Board -- Ethernet Board EMS6


The EMS6 accesses 4xFE signals and 2xGE/FE signals, and
supports transparent transmission services and Layer 2 switching.
Provides GE optical interfaces or GE electrical interfaces by using two
SFP modules. The GE electrical interface is compatible with the FE
electrical interface.
Supports an uplink bandwidth of 2xVC-4s.

Recommended
installation EXT slot7 EXT slot8
sequence for
EMS6 boards slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 93
Power Cross-Connection Clock
Board -- PXC
The PXC board realizes the cross-connection (1616 VC4) and
clock functions , it also provides the DC power for other boards.

Power input IDU External clock/ Indicator


interface Power Wayside
switch Interface/Overhea
d data channel

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 94
PXC -- Board Installation
EXT slot3 EXT slot4
PXC slot1 SCC slot2

IDU 610

EXT slot7 EXT slot8


slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 95
PXC -- Block Diagram
Backplane
External clock/
wayside E1
interface/ DCC
order wire Clock
synchronous data unit Cross
Asynchronous data External -connect
clock unit
unit
Overhead bus
/
Control bus

External -48V System 48V


Logical
control power power System power supply
unit unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 96
R2 New Slide

PXCThe new function of external clock unit


The interface support access external clock, wayside service,
transparently transmit DCC bytes, synchronous data overhead bytes,
asynchronous data overhead bytes, and orderwire overhead bytes.
External clock: set the type (2 Mbit/s or 2 MHz)
External clock of HZ modeBypass data(E1) other functions of clock
DCC orderwire synchronous dataasynchronous dataare
mutually exclusive.
The external clock interface can transparently transmit DCC bytes,
synchronous data overhead bytes, asynchronous data overhead bytes,
and orderwire overhead bytes at the same time.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 97
PXC -- Block Diagram for Wayside
E1
Note: To plug out
SCC board IF board SCC board may
interrupt the
wayside E1 Cross wayside E1
-connect services.
board IF board

Cross IF board
-connect
wayside E2 board

IF board

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 98
PXC -- Indicators
Indicator Status Meaning
On The board is working normally.
On The board hardware is faulty.
STAT
Off The board is not working, or not created, or has
no input power.
On The power is normal.
PWR On +3.3V power fault or -48V input power abnormal
Off No input power.
On The clock is normal.
SYNC
On The clock source is lost or the switch exists.
On The board is in active state.
ACT
Off The board is in standby status.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 99
IDU Board -- SCC
SCC provides system control and communication functions, auxiliary
interfaces management and standby internal power module.

Flash
memory

Indicators

NM Order wire
interface
Indicator
test button NM serial Asynchronous
port NM cascaded data and
Reset interface Boolean
button interface

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 100
SCC Board -- Board Installation

EXT slot3 EXT slot4


PXC slot1 SCC slot2

IDU 610

EXT slot7 EXT slot8


slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2

IDU 620

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 101
SCC Board - Block Diagram
Order wire interface Backplane
Syn / Asyn. data interface Auxiliary
interface
Overhead Overhead bus
Boolean interface unit cross-
NM interface connect
unit
HUB Control
Cascaded network comm.
port unit
NM serial port

Control bus

48V
System
power System power supply
unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 102
R2 New Slide

SCC Board ---synchronous data


Synchronous data interface can be used as voice and data
communications channel.

Orderwire spanning can be used as the order wire

Note: Only the SCC with VER.C-PCB support Synchronous data


interface and Orderwire spanning.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 103
SCC Board -- NM Cable Connection
The SCC board sets the NE ID through the software. The initial NE ID
is set to 49136 by default.
The IP address of NE is also set through the software. The IP address is
set to 129.9.0.ID by default.

NMS
Connected by
Ethernet cable

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 104
SCC Board -- Wrong Connections
Self-loop of
single NE

Multiple NEs are


cascaded as a
loop.

The connection
will cause NE
reset frequently.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 105
Adjust Slide
SCC Board DCC Channel
When the IF1A/B board transmits PDH microwave signals less than
16xE1 signals, the IF1A/B board always uses byte D1 as the DCC
channel.
When the IF1A/B board transmits 16xE1 PDH microwave signals, the
IF1A/B board uses bytes D1-D1 or D1- D3 as DCC channels through
software anto-negotiation instead of manual configure.
When the IF1A/B board transmits PDH microwave signals more than
16xE1 signals, the IF1A/B board always uses bytes D1 to D3 as DCC
channels.
The microwave ports of the IF0A/B board and IDU 605 always use bytes
D1 to D3 as DCC channels.
SDH line ports generally use bytes D1 to D3 as DCC channels. It also
can use D1-D1D4-D12D1-D12 as DCC channels.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 106
SCC Board -- Indicators
Indicato Status Meaning
r
On The board is working normally.
On The board hardware is faulty.
STAT
Off The board is not working, or not created, or
has no input power.
On 100 ms and off During the board power-on/reset, loading
100 ms the software.
On 300 ms and off The board software is introduced through
PROG 300 ms the BIOS during the power-on/reset.
On Initialize the upper layer software.
On 100 ms and off During the board power-on/reset,
100 ms BOOTROM self-test fails.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 107
SCC Board -- Indicators
Indicato Status Meaning
r
On During the board power-on/reset, the memory self-
test fails or the upper layer software loading fails, or
PROG during the board running, the logical file and software
are lost.
Off The software is normal.
On The system is normal.
On The system has a critical or major alarm.
ALM
On The system has a minor alarm.
Off The system has no input power.
On The system is in maintenance state ( that is, loop-
MANT back, laser power-off, and ODU transceiver mute)
Off The system is in working state.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 108
IDU Board -- Fan Board (FAN)
Indicator EXT slot7 EXT slot8
slot EXT slot5 EXT slot6
20 PXC slot3 EXT slot4
PXC slot1 SCC slot2
Fan direction

Indicator Status Meaning


On The fan is working normally.

FAN On The board is faulty.

Off The board has no input power.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 109
R2 New Slide

IDU BoardsSummary
Board Support IDU Type Explain

IF1A/IF1B IDU 610/IDU 620 receives and transmits 1x IF signal. It


realizes the conversion between baseband
IF0A/IF0B IDU 620
digital signal and IF signal, it also provides -
IFX IDU 620 48V DC power supply and management
signal to the ODU.

PH1 IDU 610/IDU 620 8E1tributary boardprovide E1 interface.

PO1 IDU 610/IDU 620 16E1tributary boardprovide E1 interface.

PD1 IDU 610/IDU 620 32E1tributary boardprovide E1 interface.

PL3 IDU 610/IDU 620 3E3/DS3 tributary boardprovide E3/DS3


interface.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 110
R2 New Slide

IDU BoardsSummary (cont.)


Board Support IDU Type Explain

SD1 IDU 610/IDU 620 2STM-1 line board, provide STM-1 optical interface

SDE IDU 610/IDU 620 2STM-1 line board, provide STM-1 electrical
interface

SL1 IDU 610/IDU 620 1STM-1 line board, provide STM-1 optical interface

SLE IDU 610/IDU 620 1STM-1 line board, provide STM-1 electrical
interface

SL4 IDU 620 1STM-41 line board, provide STM-4 optical interface

EFT4 IDU 610/IDU 620 4-port 10M/100M Ethernet transparent transmission


board.

EMS6 IDU 620 supports transparent transmission services and Layer


2 switching services

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 111
R2 New Slide

IDU BoardsSummary (cont.)


Board Support IDU Type Explain

SCC IDU 610/IDU 620 SCC provides system control and communication
functions

PXC IDU 610/IDU 620 Power Cross-Connection Clock Board provide


power supply, cross, clock function.

FAN IDU 620 FAN board

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 112
R2 New Slide

Contents
Equipment Structure

2.1 System Diagram

2.2 Software Structure

2.3 IDU 605 Structure and Boards

2.4 IDU 610/620 Structure and Boards

2.5 ODU Interfaces and Parameters

2.6 Hybrid coupler Parameters

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 113
ODU -- Block Diagram
Control unit

Up
Amplifier Amplifier
conversion

Antenna port
IF interface
IF Frequency Duplexer
interface synthesizer
unit

Down
Amplifier Amplifier
conversion

Power
unit

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 114
R2 New Slide

ODU Types
The OptiX RTN 600 ODU is available in three types: Standard Power,
High Power, and Low capacity for PDH.

Item Description

Standard Power High Power ODU Low Capacity for


ODU PDH ODU

ODU series SP and SPA HP LP

Frequency band 6/7/8/11/13/15/18/2 7/8/11/13/15/18/23/2 7/13/15/18/23


3/26/38GHz 6/32/38 GHz GHz

Microwave type SDH/PDH PDH

Microwave QPSK/16QAM/32QAM/64QAM/128QAM QPSK/16QAM


modulation scheme

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 115
Adjust Slide

ODUInterface
The ODUs are classified into the ODU with the waveguide interface and the ODU
with the coaxial interface according to the type of the antenna interface of the ODU.

738 GHz ODUs are waveguide


interfaces 6 GHz SP series ODUs are coaxial interfaces

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 116
R2 New Slide

The Match Relation between IDU and ODU

ODU
IDU IF board Description
Series

IDU 605 match with the LP-ODU firstly. If


IDU 605 IF0 LP/SP the LP-ODU not satisfy the requirement, than
IDU 605 match with the SP-ODU.

Not support HP ODU in the result of the nature


IDU 610 IF1A/IF1B SP
heat dissipation mode.

IF1A/IF1B SP/HP None

IDU 620 IF0 LP/SP None

IFX SP/HP None

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 117
Adjust Slide

ODU -- Main Performance


ITEM L6 U6 7 8 11 13 15 18 23 26 32 38
ODU6G38G7G
HPTX

Power. 30 30 28 26 26 25.5 25 25 23 23
maximum
SPTX
Power 26 26 25.5 25.5 24.5 24.5 24.5 24 22.5 22 20.5
maximum
LPTX
Power 27 27 25 25 23.5 23.5 23
maximum
Maximum
receive
-20
power
dBm
Tx Frequency Stability (ppm): 5

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 118
Adjust Slide

Contents
Equipment Structure

2.1 System Diagram

2.2 Software Structure

2.3 IDU 605 Structure and Boards

2.4 IDU 610/620 Structure and Boards

2.5 ODU Interfaces and Parameters

2.6 Hybrid coupler Parameters

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 119
Adjust Slide
Hybrid Coupler

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 120
Adjust Slide
Hybrid coupler -- Main
Performance
Item Performance
Loss (dB) 3.30.3 (3 dB balanced hybrid coupler)

1.7 (6 dB unbalanced hybrid coupler with waveguide


interfaces)

1.9 (6 dB unbalanced hybrid coupler with coaxial


interfaces)
Ripple of loss (dB) 0.5
Degree of coupling (dB) 3.30.3 (3 dB balanced hybrid coupler)

6.50.6 (6 dB unbalanced hybrid coupler)


Degree of separation (dB) 20
Voltage standing wave 1.2
ratio (VSWR)
Power capacity (W) 8

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 121
Adjust Slide

Summary
OptiX RTN 600 equipment structure
Software Structure host and board software are integrate in SCC board,
ODU as logical board.
IDU divide into three types: IDU 605, IDU 610, IDU 620
IDU 610/620 through configure different board to realize the required function:
IF BoardIF1AIF1BIF0AIF0BIFX
Line BoardSL1SD1SLESDESL4
Tributary BoardPH1PO1PD1PL3
Data BoardEFT4EMS6
Power Cross Connect BoardPXC
System Communication and Control boardSCC
Fan boardFAN

IDU 605 is available in three types: IDU 605 1A, IDU 605 1B
ODUinterfacemain performance
Hybrid Couplerinterfacemain performance.

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 122
Adjust Slide

Summary

Contents Review
Main characteristics

System Structure, Software and Hardware Structure

Board Functions and Signal flow in the IDU

ODU and Hybrid coupler Features and Functions

Equipment Level Protection Actions and Signal flow

Microwave Link Protection Actions and Signal flow

Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved. Page 123
Thank you
www.huawei.com

S-ar putea să vă placă și