Documente Academic
Documente Profesional
Documente Cultură
ON
BY-
VIKASH CHOUDHARY
CONTENTS
BOP
are usually steel bars & are supplied by ‘MUKUND STEELS’ & ‘VARDHMAN STEELS’
in bhiwadi itself.
2.HOT FORGING BY PRESS-
involves the shaping of metal using continuous compressive forces slowly.
The process starts by heating the bar to 1,200 to 1,300 °C using high-power
induction coils. It is then descaled with rollers, sheared into blanks, and
transferred through several successive forming stages, during which it is
upset, preformed, final forged.
5.TOOTH CHAMFERING-
6.GEAR SHAVING-
Is a technique for generating improved tooth shape in gears of involute
design.
Gear shaving originated as a means for avoiding undesirable undercutting of
the root of the tooth in gears with small numbers of teeth (caused by
imperfections in the tool).
Gear shaving may be used to improve the quality of meshing between two
gears or between a gear and a rack.
7.BROACHING-
is a machining process that uses a toothed tool, called a broach, to remove
material.
is used when precision machining is required, especially for odd shapes.
- a broached workpiece
8.DRILLING IN GEARS-
9.PUNCHING-
is a metal forming process that uses a punch press to force a tool, called
a punch, through the workpiece to create a hole.
10.HARD TURNING /INTERNAL GRINDING-
11.INSPECTION-
Fully equipped standard Room for gear parameter inspection.
Fully equipped metallurgical lab for hardness & microstructure
inspection.
12.DISPATCH
4.CLASSIFICATION OF GEARS-
1.According to the position of axes of the shaft:- The axes of the two shafts
between which the motion is to be transmitted, may be:
Parallel
Intersecting
Non Intersecting and Non Parallel