2-3 cm using the wire stripper. 2. Arrange the eight cables of the twisted pair based on the following sequence: white-orange, orange, white-green, blue, white-blue, green, white-brown, and brown. The eight cables correspond to pins 1 to 8 of a RJ45 connector. 3. Crimp the twisted pair into the RJ45 connector using the crimping tool. 4. Identify pins 4, 5, and 8 of the RJ45 connector, which correspond to cables in blue, white-blue, and brown respectively. 5. Solder pins 4, 5, and 8 of the RJ45 connector to pins 5, 3, 2 of the DB9 female connector.
DISCOVER, DISRUPT, DELIVER
Huawei Configuração do PuTTy
Username:hwuser Password:hu4w31BR*
DISCOVER, DISRUPT, DELIVER
Huawei A – Diagnóstico Físico para elementos com interface Eth-Trunk
Passo 1 - aplicar o comando “display
interface brief” e localizar a interface Eth-Trunk1 e a sua respectiva componente (no caso Giga 0/3/0);
DISCOVER, DISRUPT, DELIVER
Huawei Passo 2 - aplicar o comando “display interface giga0/3/0” e verificar as duas primeiras linhas que devem esta em Up.
Passo 3 – Verificar os níveis ópticos
DISCOVER, DISRUPT, DELIVER
Huawei
-Caso o line state da interface esteja down,
verificar o cabeamento interno.
- Caso o cabeamento interno estaja Ok,
provavelmente deverá ser um rompimento de fibra.
- A rede externa deverá ser acionada para
verificação;
DISCOVER, DISRUPT, DELIVER
Huawei A – Diagnóstico Físico para elementos em STP (Spanning Tree) Passo 1 – Caso não encontre a <m-br-sp-spo-ctp-gwd-01>disp isis interface interface Eth-Trunk1 ao aplicar o Interface information for ISIS(1) comando “display interface --------------------------------- brief”, aplicar o comando Interface Id IPV4.State IPV6.State MTU Type DIS GE1/4/0.3679 002 Up Down 9003 L2 -- “display isis interface” para GE1/5/0.3679 001 Up Down 9003 L2 -- localizar as interfaces de rede.
GigabitEthernet1/4/0 current state : UP Line protocol current state : UP Description:IP_ULK_10 - connect_to_m-br-sp-spo-alb-gwd-01_GigabitEthernet1/5/0_Ring1 Switch Port,The Maximum Transmit Unit is 1500 Passo 2 – Verifique o status das Internet protocol processing : disabled interfaces listadas no comando anterior, devem estar up. IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 781d-baa6-c02b The Vendor PN is RTXM191-400 The Vendor Name is WTD