Documente Academic
Documente Profesional
Documente Cultură
If the number of idle SDCCHs in the cell is smaller than or equal to the value of Idle SDCCH Threshold N1
,the BSC tries to find a TCHF that can be converted to the SDCCH.
Now BSC will check following three conditions for initiating the conversion from TCHFs to SDCCHs:
Each cell is configured with a counter S. Each time the TCH is converted to the SDCCH, the counter is set to ResTime.
The value of the counter is adjusted every three seconds.
Where ResTime = TCH Min Recovery Time [Minimum time for the recovery of a TCH from SDCCH]
© VimpelCom Ltd 2012
If
Number of Idle SDCCHs > 8 + Idle SDCCH Threshold N1
[S decreased by 3]
If
Number of Idle SDCCHs < 8 + Idle SDCCH Threshold N1
[S increased by 12 but not above than TCH recovery Time]
If
Number of Idle SDCCHs = 8 + Idle SDCCH Threshold N1
[S is unchanged]
If the value of the counter S is equal to or lower than 0 after adjustment, the SDCCH is converted to the TCH.
© VimpelCom Ltd 2012
Related Parameters
Dynamic Allocation Enabled
© VimpelCom Ltd 2012
Cell SDCCH Channel Maximum
© VimpelCom Ltd 2012
Idle SDCCH Threshold N1
© VimpelCom Ltd 2012
TCH Minimum Recovery Time(s)
© VimpelCom Ltd 2012
EID Sample WO [For Reference]
Dynamic SDCCH sample WO for EID is pasted below for reference:
© VimpelCom Ltd 2012
Thank You