Documente Academic
Documente Profesional
Documente Cultură
Soria
Schematic data files (.sdb) describing the circuits
to be analyzed in graphical form, for display and
editing by S-Edit™ Schematic Editor.
Simulation input files (.sp) describing the circuits
to be analyzed in textual form, for editing and
simulation by T-Spice™ Circuit Simulator. (The
listings of input files in this chapter exclude
comments.)
Simulation output files (.out) containing the
numerical results of the circuit analyses, for
manipulation and display by W-Edit™ Waveform
Viewer.
Launch T-Spice
Use File > Open to open the specified SPICE
(.sp) file.
Use Simulation > Run Simulation to start the
simulation.
In the Run Simulation dialog, under Waveform
options choose Show during.
Click Start Simulation. W-Edit will
automatically display the results.
DC operating point analysis finds a circuit’s
steady-state condition, obtained (in principle)
after the input voltages have been applied for
an infinite amount of time.
Schematic invert1.sdb
Input invert1.sp
Output invert1.out
c2 out Gnd 800ff .include ml2_125.md
m1p out in Vdd Vdd pmos L=5u W=12u
m1n out in Gnd Gnd nmos L=5u W=8u
.op
Vdd Vdd Gnd 3.0
vin in Gnd 1.0
.END
A capacitor c2 (signified by the key letter c),
connecting nodes out and GND, is defined,
with a capacitance of 800 femtofarads.