Documente Academic
Documente Profesional
Documente Cultură
INTRODUCTION
Our project is Also an Application of automation where we have develop a bottle filling system to various processes are controlled using
PLC. the model componnt include pumps ,level sensors, the the electric motor, the indicator, and the liquides . These components are to
be controlled by the action of the programable logic controllers which is takes in field-inputs from these component and then give
appropriate control signal as the field outputs.
BLOCKDIAGRAM
.
WORKING
In this project, we will put a set of measuring component (Current transformer, Potential Transformer, Relay etc.) for continuous monitoring of the underground cable power
There are three tank, first tank contains water, second tank contains flavour or vice versa and the middle tank is mixing and
system. By the help of the data collected from the measuring component, the Arduino will give the value of the change in resistance and capacitance and we will get the exact
location offilling tank. Water and flavor tank have connected valve V1 and V2 respectivly. Valve V1 and V2 is open their reqired time and
the fault.
filling the liquide in maxing tank. After filling the fluid to the middle tank is mixing through the mixer. Motor is on for their
require time to mix the different fluide of tank 1 and tank 2 in middle tank. The conveyour system arranged below the filling
container.