With Other Welding Methods. Compatible Processes Are MIG (Metal Inert Gas) Or MAG (Metal Active Gas) Welding As Well As TIG (Tungsten Inert Gas) Or Plasma Welding. 1. It Is Used To Obtain High Temperatures In Comparison With Other Techniques Of Welding. 2. It Is Used Because Of Low Diameter Properties Because It Can Operate To Low Diameter . 3. Its Is Used Because In This Type Of Welding Properties Of Two Metals ,Gases ,Plasma, Laser Can Be Used THERE ARE MANY TYPES OF HYBRID WELDING BUT MAIN USED IN INDUSTRIES IS OF THREE TYPES: 1. MIG ( Metal Innert Gas) 2. MAG (Metal Active Gas) 3. TIG (Tungsten Innert Gas) OR Plasma Welding Gas Metal Arc Welding (Gmaw), Sometimes Referred To By Its Subtypes Metal Inert Gas (Mig) Welding Or Metal Active Gas (Mag) Welding, Is A Welding Process In Which An Electric Arc Forms Between A Consumable Mig Wire Electrode And The Workpiece Metal(s), Which Heats The Workpiece Metal(s), Causing Them To Melt And Join. Along With The Wire Electrode, A Shielding Gas Feeds Through The Welding Gun, Which Shields The Process From Contaminants In The Air. The Difference Between Two These Processes Is, In MIG Welding Shielding Gas Is Either Argon Or Helium Or A Mix Of Both Or A Combination With Oxygen, But Whereas In MAG Welding CARBON DIOXIDE Is Used Instead Of Inert Gas. Common Shielding Gases...Only Two Of The Noble Gases, Helium And Argon, Are Cost Effective Enough To Be Used In Welding These Inert Gases Are Used In In Gas Metal Arc Welding For The Welding Of Non-ferrous Metals. Semi-inert Shielding Gases, Or Active Shield Gases, Include Carbon Dioxide, Oxygen, Nitrogen, And Hydrogen Their Purpose Is To Protect The Weld Area From Oxygen, And Water Vapour. Depending On The Materials Being Welded, These Atmospheric Gases Can Reduce The Quality Of The Weld Or Make The Welding More Difficult. Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a non- consumable tungsten electrode to produce the weld. The weld area and electrode is protected from oxidation or other atmospheric contamination by an inert shielding gas (argon or helium), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A constant-current welding power supply produces electrical energy, which is conducted across the arc through a column of highly ionized gas and metal vapors known as a plasma