Documente Academic
Documente Profesional
Documente Cultură
INTEGRAL DE AERONAVES
TEMA:
USO DE MANUALES TÉCNICOS
AERONÁUTICOS Y MEDIDAS DE
SEGURIDAD EN AERONAVES.
ÍNDICE
• INTRODUCCIÓN
• COMPETENCIAS TERMINALES
• COMPETENCIAS
1. Medidas de seguridad en el hangar, taller y aeronaves.
1.1 Precauciones, recomendaciones y acciones correctivas
que se debe adoptar en caso de incidentes o accidentes laborales.
1.2 Principios de las prácticas de taller y cuidado de herramientas.
1.2 Seguridad con materiales aeronáuticos.
2. Generalidades del uso de manuales técnicos.
2.1 Uso y manejo del Manual de Mantto de Aeronaves (AMM).
2.2 Uso y manejo del Manual de Catálogo de partes ilustrados (IPC)
2.3 Interpretación de Directivas de Aeronavegabilidad (AD)
ÍNDICE
Infraestructura
- pisos
- Paredes
- Techos
Iluminación Energía
Eléctrica
HANGAR
Red
Bancos y Neumática
escaleras
ÁREAS DE SEGURIDAD Y
RESTRICCIONES EN EL HANGAR
Condiciones de seguridad en el
Hangar
Condiciones de seguridad en el
Hangar
B. PRECAUCIONES.
SEGURIDAD EN AERONAVES
(Línea de Vuelo)
ÁREAS DE SEGURIDAD EN AERONAVES
Remolque
Seguridad
Ruido Aeronave en el
Motor
Aire de
Escape
TOWING AND TAXI CLEARANCES
POWER PLANT NOISE ÁREA
WARNING PLACARDS
INTAKE DANGER
AREAS
POWERPLANT DANGER AREAS
RECARGA DE COMBUSTIBLE
FOD (Foreign Object Damage
REMOLQUE DE AERONAVE
AERONAVE PARQUEADA EN PISTA AUXILIAR.
Arranque de motores
1.1 PROTECCIÓN CONTRA
ACCIDENTES
Hombre succionado por turbina de avión
CAUSALES DE ACCIDENTES
FAA-OACI
LESIONES PERSONALES
1.2 Identificación de zonas del avión
1.2 Identificación de zonas del avión
REFERENCE PLANES
AND LINE
REFERENCE PLANES
AND LINE
DIMENSIONS AND AREAS -
MAINTENANCE PRACTICES
1. General
A. This chapter gives the principal dimensions for the wing,
ailerons, flaps, horizontal stabilizer surfaces, vertical stabilizer
surfaces, and body. It also gives areas for the wing and tail
surfaces.
There are station diagrams for the body, wing, vertical tail
surfaces, engine nacelle and access doors and panels.
45