Documente Academic
Documente Profesional
Documente Cultură
www.ambicasteels.com
10/30/2019 1
precaution POINTS
• Sharp edges are not acceptable. The corner
radius should be at least 5.0mm.
• Sufficient front and back end discard is to be
given, so that no piping and powder or slag
entrapment is there in the billets.
• Billet length should be as per P.O.
• Both end of the billets, should be cut through gas
cutting or band saw cutting with proper finish.
• Straightness should be 4mm/meter maximum. It
should be measured at one single curve only.
• Buckles in the middle and end of the billets are
not allowed
10/30/2019 2
www.ambicasteels.com
OURPRESENCE
AmbicaSteelsisoneofthemostupdatedstainlesssteelcompanies intheworld,employingarangeof
modernsteelmaking technologies.
Our Prominent
Customers
North
USA
America Houston
Customers Served
43
Countries Served
2 Colombia
Cali
Peru
Lima
South and
Latin America
Customers Served
137
Countries Served
www.ambicasteels.com
Ambica’s presence around the world
TQM-Packaging
www.ambicasteels.com
Thank you
Ambica Steels Ltd.
Email id – info@ambicasteels.com
www.ambicasteels.com