Documente Academic
Documente Profesional
Documente Cultură
possible.
Part walls should not be less than 1.5mm thick; thinner walls can
be achieved on small parts; walls with length to thickness ratios
above 8:1 are difficult to press.
Steps in parts can be produced if they are simple and their size
doesn’t exceed 15% of the overall part length.
Letters can be pressed if oriented perpendicular to the pressing
direction. Raised letters are more susceptible to damage in the
green stage and prevent stacking.
Flanges or overhangs can be produced by a step in the die.
A true radius cannot be pressed; instead use a chamfer.
Dimensional tolerances are on the order of +-0.05 to 0.1 mm.
Tolerances improve significantly with additional operations
such as sizing, machining and grinding.
Thin walls and projections create fragile tooling.