Sunteți pe pagina 1din 1

SDM COLLEGE OF ENGINEERING & TECHNOLOGY, Dharwad – 580002

Department of Electronics & Communication


Academic Year 2019-20 (Project Phase 1)
Title: Detection of Heart Failures using ECG Modules

Objectives:
• To design an efficient algorithm for
classification of ECG segments.
• To validate the design for efficient database.
• To implement on embedded hardware.
• To interface to web server.
• To target the proposed technique on mobile.

Scope:
This proposal is targeted for large section of
people suffering from heart diseases. This is also
effective because of online processing and
portability.

Tools Used: Work to be done in Phase 2:


• Arduino Genuino/UNO.
• Processing the acquired signal with the
• Heart Sensor (AD8232) & Electrodes.
Processor.
• Raspberry Pi.
• Providing more test data to the Processor
• Mobile Device.
for enhanced precision.
Methodology: • Acquiring output either through Web
• The ElectroCardio Signal Sensor (AD8232) is Interface or by designing an Application.
the main biosensor used to detect heart • Verification in Compliance to IEEE & Wiley
rhythm. Specifications.
• The Arduino Genuino acts as an ADC device
and also a signal generator. References:
• The signals generated by the Arduino are • Poonam Sao, Rajendra Hegadi, Sanjeev
subjected to Digital Signal Processing to obtain Karmakar, “A Literature Review on
the constraints which may determine the Approaches of ECG Pattern Recognition”,
possible heart failure/defect. International Journal of Information
• For the signal processing purpose we use Science and Intelligent System, 79-90,
Raspberry Pi. 2014.
• John R Hampton, “The ECG in Practice”,
Work Done so far: with contributions from David Adlam,
• Analyzing the specifications as mentioned in Elsevier Publications, 6e-2013.
reference papers of IEEE & Wiley. • Poli R, Cagnoni S and Valli G, “Genetic
• Design of Logic Block. Design of Optimum Linear & Nonlinear
• Partial Signal acquired through Heart Sensor QRS Detectors”, IEEE Transaction of
and ECG Electrodes. Biomedical Engg, vol. 42, 1137-1141, 1995.

Apoorva B Joshi 2SD16EC015 Under the guidance of:


Prof. Dr. Satish S B,
Prajwal S Chavadi 2SD16EC069
Dean of Industry Institute Interface
Yashodha Nesaragi 2SD16EC122 Department of Electronics & Communication,

S-ar putea să vă placă și