Sunteți pe pagina 1din 5

Rule and Procesure of Boosting

Power

31 October 2018
Config Pa/Pb and Rs Power
Internal use only▲

Transmission Power of Each Channel (w) 80 80 80 80


Bandwidth (M) 20 15 10 5
Rs Power 18.2 21.2 19.4 22.4 21.2 24.2 24.2 27.2
Pa 0 -3 0 -3 0 -3 0 -3
Pb 0 1 0 1 0 1 0 1

 Parameter Setting

MO Name MO Short Name Parameter Name Parameter Short Name Baseline Value

Minimum Receiving Level(RSRP) During Cell


E-UTRAN Cell Reselection EUtranReselection selQrxLevMin -120
Selection
Control Plane Timer ControlPlaneTimer RRC Setup Timer (ms) rrcSetupTimer 15000

 Cell TA distribution, whether exist overshooting; Decrease RS power, adjust antenna down tilt;

© ZTE All rights reserved


2
Example config Pa/Pb Rs Power
Internal use only▲

The yellow cells mean the input.

Transmission Power of Each Channel (w) 80

Bandwidth (M) 20

Number of REs 1200


Number of REs Used by RSs of Type-B Symbols 200
Number of REs Used by Services of Type-B Symbols 1000
Empty REs of Type-B Symbols 0
REs of Type-A Symbols 1200

This table describes the maximum


allowed Rspower values (dBm) for
PB
Real Power
different PA/PB combinations under
Percentage 0 1 2 3
the prerequisite of a specific
Ratio with RS
wideband and a specific channel
transmission power. 1.00 0.8 0.6 0.4
-6 0.25118864 22.4873183 22.9999878 23.5813789 24.2390874
-4.77 0.33342641 21.7601547 22.3401391 23.0090874 23.0090874
-3 0.50118723 20.5725599 21.2390874 21.2390874 21.2390874
-1.77 0.66527316 19.6593676 20.0090874 20.0090874 20.0090874
PA
0 1 18.2390874 18.2390874 18.2390874 18.2390874
1 1.25892541 17.2390874 17.2390874 17.2390874 17.2390874
2 1.58489319 16.2390874 16.2390874 16.2390874 16.2390874
3 1.99526231 15.2390874 15.2390874 15.2390874 15.2390874 Rs Power Tools

© ZTE All rights reserved


3
RS Power Vs TA and MOD3
Internal use only▲

Cell Name MEID ECellEquipmentFunction maxCPTransPwr cpTransPwr cpSpeRefSigPwr


MWR001ML1_TVRIMANOKWARIML1 403001 1 47.8 47.7 15.2
MWR001ML1_TVRIMANOKWARIML2 403001 2 47.8 47.7 15.2
MWR001ML1_TVRIMANOKWARIML3 403001 3 47.8 47.7 15.2
MWR016ML1_PANINDIML1 403016 1 47.7 47.7 15.2
MWR016ML1_PANINDIML2 403016 2 47.7 47.7 15.2
MWR016ML1_PANINDIML3 403016 3 47.7 47.7 15.2
MWR085ML1_MAKMURJAYA(DMT)ML1 403085 1 47.7 45.7 13.2
MWR085ML1_MAKMURJAYA(DMT)ML2 403085 2 47.7 47.7 15.2
MWR085ML1_MAKMURJAYA(DMT)ML3 403085 3 47.7 47.7 15.2

Remark
- RS Power 15.2
- TA vs RS Power existing show overleap coverage
- Suggestion if want increasing payload with increase rs power must
look TA distribution and Mod3 fisrt
© ZTE All rights reserved
4

S-ar putea să vă placă și